Jump to content

Hamilton Khaki X-Wind Automatic H776660

WillFly

By WillFly
in Your Watch Collection

 Share

Recommended Posts

WillFly Distinguished Member

WillFly

Posted
Posted

I wonder what my father - who was a navigator in RAF Transport Command from 1941-1946 - would have made of this one, which I'm expecting in the post tomorrow. It's a sweet piece of engineering and, though I'll never be piloting a plane, I will certainly be enjoying the mechanics of this watch. The main hands setting and chrono buttons are on the left, and the two buttons on the right operate the upper and lower interior bezels which can be used to calculate cross wind drift (hence the name of the watch: "X-Wind"). Valjoux 7750 chrono movement.

 

Pictures from stock:

 

post-64-0-57525600-1452702240_thumb.jpg

post-64-0-07899900-1452702257_thumb.jpg

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Hiya watch people,  any more ideas on what to do here yet ? How about just adding ourselves to waggy's list for now. You dont have to add your full name and an email that can be trashed takes minutes to set up. 
    • Michael1962
      Vertex Dirty Dozen crystal

      By Michael1962 · Posted

      Certainly looks like a ring that needs unscrewing in that photo. It definitely looks like a thread above the castellated ring as well. Separate to the caseback ring thread. It even looks to be a smaller diameter. I would expect that. Once undone out of its thread, it should fall out of the case. Would it be possible to make a tool shaped like a letter H with one side of the H engaging the castellations in the ring and the other side of the H for you to be able to unscrew it using your hand? Making a tool with 6 'legs' to pick up all of the castellations would be a labour of love.
    • B1N9S
      Vertex Dirty Dozen crystal

      By B1N9S · Posted

      Can anyone advise how to remove the crystal from a Vertex DD case ?  I think I need to unscrew an internal retainer ?  It definitely isn't just pushing out.
    • SamLiddle
      Help for a novice - fused spring bar

      By SamLiddle · Posted

      Alright, the job is done. I first filed down the stubs flat. I then used a Proxxon hand drill first with a 0.5mm bit to score a point to work from, then a 1mm drill bit to properly drill out some lug holes. I just went slowly, checking the depth as I went. I drilled the inside of the lugs, leaving the outsides unblemished. I was worried that drilling at an angle might be a problem, but it turned out fine. Lug holes don't need to be very accurate, so it was actually easy to create holes to easily accommodate a spring bar. The result is a 'good enough' outcome that worked for me. Thanks for your help everyone, loving the hobby so far. I learn so much with each project.
    • watchweasol
      Hello from Wales, UK.

      By watchweasol · Posted

      Welcome to the forum. Yep not a cheap hobby by any means , Ali Express, the Chinese Amazon has some decent tools but should ask the members their thoughts before purchase.  A little reading to help you along. TZIllustratedGlossary.pdf
×
×
  • Create New...