Jump to content

Recommended Posts

Posted

My sister-in-law, who is a teacher, teaches English to adult Chinese and secondary school students here in Singapore. 

She recently made a shocking discovery. Some of her students can't tell the time from an analog clockface!

All their lives, the students only used their smart phones or smart watches to tell the time, so they never learnt how to read an analog clock.

I'm going to test our Sunday school kids tomorrow to see how many can't read an analog clock.

How are the young kids in your country? Can they read a clock?

Posted
1 minute ago, HectorLooi said:

My sister-in-law, who is a teacher, teaches English to adult Chinese and secondary school students here in Singapore. 

She recently made a shocking discovery. Some of her students can't tell the time from an analog clockface!

All their lives, the students only used their smart phones or smart watches to tell the time, so they never learnt how to read an analog clock.

I'm going to test our Sunday school kids tomorrow to see how many can't read an analog clock.

How are the young kids in your country? Can they read a clock?

…In the 1970s as a child of six or seven I could read the hours on a dial. My father worked for General Electric Co and brought home many prototypes of clocks with digital readouts- early led, card flip, rotating digit wheels, etc. It probably hindered my development a bit as I would run into a room with a digital clock for the time instead of learning to read the dial on our Waterbury kitchen clock 🤨

Posted

We have a generation who have never had an analog or mechanical watch.

When I sell a watch on ebay, I add a note with clear instructions on how to wind it, set the time/date etc. I had someone complain a manual wind watch I'd sent them was not working. Turns out that they didn't know which way to turn the crown to wind it.

  • Like 1
Posted

I have 3 children, all growing up too quick, but the youngest is still in primary school for one last year. I can confirm that here in the UK, learning to read an analogue clock is still on the curriculum, if memory serves me correct, they all did this around the age of 5 to 6.

  • Like 1
Posted

USA: Two kids though elementary/primary school in the last ten years and they were taught how to read clocks in the earliest years. Though not drilled on paper as extensively as I was in the early 1980's (blank clock faces and asked to draw in the specified times), it was part of software and web-based math (that's what we call "maths" for you UK folks) curriculum they did before and during covid schooling.

But save the hand wringing and "kids these days..." worries in this country. There are still analog clocks in every classroom and those are not going away soon. So even if a 5 year old isn't taught as thoroughly, they still pick it up eventually.

Back to the 1980's... Plenty of my friends were not great at reading the analog clock back then either, and they wore digital Casios to school -- we envied them for their Casios.

  • Like 1
Posted

I was very envious of those casios, that is the very reason I am where I am with these hundreds of watches that surround me. I couldn't have one then but I never forgot, then ebay was born...

Yes, analogue clocks in all the classrooms here too, soon learnt how to read them too, 30 seconds till lunch, 2 minutes till home time, then in secondary school youv'e got one hour to complete all the questions, time starts now!!

Posted
7 hours ago, HectorLooi said:

Should we start making jump hour watches again? Or those "rolodex" type clocks? 

Starwheel & wandering hour complications! And as a child I would sit and stare at my father's "rolodex" alarm clock to try to catch it flipping; and I would blink & miss it every time.

For whatever it's worth, this afternoon I did ask my 14 year old kid if he felt like he could reliably read the time from a clock, and he said yes absolutely though he might be 1-2 minutes off. Nothing egregious like mixing up the hours & minutes though.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi Watchrepairtalk, I have some questions about part sourcing I was hoping someone here might be able to help with. I'm working on an FHF 180 movement with a broken balance staff, broken regulator pins, and damaged cap jewels (both top and bottom). Some Googling says that this is similar to other FHF calibers like 150s, 160s, 180s and so on but I can't figure out what the functional difference is between these movements.  Is there any reason I wouldn't be able to acquire a donor FHF 150 or similar (with no shock protection) and use parts from that or would it be smarter to source replacements individually? Also are there any sources someone could recommend to get bulk cap jewels like this? Thank you for the help!
    • Hello and welcome to the WRT forum.
    • interesting video nice to see the machine what it can do now I wonder what it costs and I'm sure it's not in my budget. Plus the video brought up questions but the website below answers the questions? What was bothering me was the size of his machine 4 mm because I thought it was bigger than that? But then it occurred to me that maybe they had variations it looks like four, seven and 10. With the seven and 10 being the best because way more tool positions in way more rotating tools. Although I bet you all the rotating tools are probably separate cost https://www.tornos.com/en/content/swissnano   Then as we been talking about Sherline. Just so that everyone's aware of this they have another division their industrial division where you can buy bits and pieces. I have a link below that shows that just in case you don't want to have the entire machine you just need bits and pieces. https://www.sherline.com/product-category/industrial-products-division/   Let's see what we can do with the concept I explained up above and bits and pieces. For one thing you can make a really tiny gear very tiny like perhaps you're going to make a watch. Then another version the center part is not separate it is all machined from one piece. Then fills gear cutting machines have gone through multiple of evolutions. A lot of it based on what he wanted to make like he was going to make a watch unfortunately eyesight issues have prevented that. Another reason why you should start projects like this much sooner when your eyesight is really good or perhaps start on watches first and then move the clocks then local we have from the industrial division? Looks like two separate motors and heads. Then it's hard to see but this entire thing is built on top of a much larger milling machine as a larger milling machine gave a very solid platform to build everything.   Then like everything else that had multiple generations are versions the indexing went through of course variations like above is one version and the one below was the last version. Now the version below I mentioned that previously and somewhere in the beginning to discussion and somebody else had one in their picture. As it is a really nice precision indexing. Then I wasn't sure if I had a the watch photos here is his unfinished watch. No he wasn't going to make a simple watch like none of his clocks were simply either what would be the challenge and that.    
    • Use a Portwest Howie lab coat. They are the biological type so they have tapped cuffs so you don't end up getting the loose cuffs of normal lab coats catching everything. 
    • Some of the Chinese tools ae great and can be purchased at a fraction of the price of Swiss ones, some are complete garbage and some I'm convinced are coming out the same factory as the branded ones.
×
×
  • Create New...