Jump to content

Recommended Posts

  • 8 months later...

Hi matabog, Great work on the mic holder.

You still around?

Your files appear to be newer version then my 2017 and I can not open them.    Could you save them as a "Parasolid" (*.x_t)  format?  From what I read, I should be able to open them in that format.

 

best regards, Kalvin

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

I had to re CAD most of this in SW 2017, but here is my version of matabog's mic holder.

 

I'm using a single transistor on the mic input and with all the info I gathered off this thread it is working very nice.  Working with Watch-O-Scope, TG (timegrapher) and PCTM.  

The EqualizerAPO64-1.3  with Peace makes a big difference.   The Virtual audio cable as stated earlier ads a voice to announce it is a demo.  The work around to this is to use the Virtual Audio Cable Lite. 

 

All the best and thank you to the software authors and those that contributed to this thread. 

🙂

 

 

 

 

 

DSC_5008.JPG

  • Like 1
  • Haha 1
Link to comment
Share on other sites

On 8/6/2021 at 2:09 PM, JohnR725 said:

The reason why comment is you can get 32-bit controller boards that are really small small displays it should then be possible to build a smaller timing machine running on software and have all the nice features without having to have an entire PC or laptop.

I'm actually doing that now. I have written the digital back-end (on a PIC24f as a test bed, uart output) and am awaiting my analog front end - planning on a TDA2822m with modified gain setting. 

I think in the end, this should be able to run on a ATtiny85 (8pdip), using a pwm's duty cycle as a way to output the timing error.

Link to comment
Share on other sites

  • 7 months later...
  • 5 weeks later...

Hello All,

Let introduce my self. My name is Frank Lima, born in Brazil but living in the US for the last 33 years. I did technical High school in electronics, graduated BS in Electrical engineering and later MBA. Although I currently work as director of sales for LATAM for broadcast products, my real passion, and hobby, is electronics. I love building stuff and repairing electronics. Although I work with the latest digital technologies, I really like analog circuits. My project during the pandemic was to build a vacuum tube amp for my vintage 1970’s Technics turntable. 

I also have a passion for mechanical watches. I remember when I was a kid I took apart my dad’s Westclox alarm clock and put it back together. And although I had some parts leftover, the clock did work. Don’t ask me how 🙂 My watchmaking hobby was dormant for many decades until I started doing it again in 2017 when I restored my late father’s Seiko 5 watch. My father bough this watch in 1969 and he wore it most of this life so it had a sentimental value to me. I have a video of this restoration on YouTube but I’m embarrassed to show it because I was so crude in watchmaking back then. I didn’t even know that you needed timegraphers to check watches. I am restoring this watch again but now I have the knowledge and tools to do it right this time.

I joined this Watch Repair Talk site in 2018 but have not being active in it. In 2020 I discover this amazing software Watch-O-Scope and started using it but, like everybody else, I needed a mic stand so I built my own based on ideas I found on the internet. I wish I had found this forum back then so I wouldn’t have to "re-invent the wheel". Here’s a link to it: https://www.watchuseek.com/threads/simple-and-effective-homemade-microphone-stand-for-watch-timing-apps-timegrapher.5135031/

I found this forum a few days ago when I searched Google for timegrapher mic stand files for 3D printer, and I quickly realized it was a forum for how Watch-O-Scope started so I immediately jumped to the first page and read all 53 pages (10 years worth of information) in 2 days. It was rewarding to me to learn how this wonderful project came together. I was amazed with the level of collaboration of everybody pitching in ideas to improve it, building different types of pre-amps, filters, etc. Doing their own tests. I’ve learned a great deal on the history of timegraphers, piezos, bimorf, etc. I even felt honored that my mic stand built was mentioned on page 30. 

For my version of the mic stand I tested many piezos with deferent diameters and I found the best combination was a 9mm piezo with a single 1 transistor pre-amp. Also I mounted the piezo mic on a rubber band which helps dumping vibrations (I had not seen anybody using this approach yet back then). This combination plus the excellent filters built-in into the WOS, gave me very good and reliable mic stand which gives a strong watch signal with almost no background interference. Please see this test I did having background music and talking while checking a wrist watch with WOS. BTW, since I don’t have a windows PC, I’ve been using WOS on a MAC with WINE, VM or Boot Camp and it works fine,  https://www.youtube.com/watch?v=avw0my2htmU

I want to improve my mic stand and I would like you opinion, suggestions, criticism, etc on my version of the mic stand.

Also, I’m looking 3D printer files to make a 6 position articulated stand. Does anybody has one?

Regards,

Frank

(PS: Sorry for the lengthy post)

Link to comment
Share on other sites

2 hours ago, FLima said:

For my version of the mic stand I tested many piezos with deferent diameters and I found the best combination was a 9mm piezo with a single 1 transistor pre-amp. Also I mounted the piezo mic on a rubber band which helps dumping vibrations (I had not seen anybody using this approach yet back then).

Congratulation to your discovery 🙂 
I went exactly the same route more than 10 years ago.

My microphone Z1 is very insensitive to ambient noise, too. However using a different approach than rubber bands - so you are probably right.

Frank

Link to comment
Share on other sites

20 hours ago, matabog said:

Thank you Matabog,

I've seen this 3D prints and I'm already in process to build them. Great work by the way. 👏👏

Perhaps I was not clear in my question. What I asked was if there is 3D print for a 6 position articulated base to where the mic stand would be mounted too.

Thanks

18 hours ago, praezis said:

My microphone Z1 is very insensitive to ambient noise, too. However using a different approach than rubber bands - so you are probably right.

Thank you Frank.

I'm glad I found this great forum 

@svorkoetter

Hi Stefan,

We exchanged e-mails back in 2020 and I had the opportunity to congratulated you for your excelente work in developing this software, but I wanted to publicly congratulate you again for this amazing software which has helped a lot of hobbyst watchmakers like me. It's simple, easy to use and has everything we need for our work and at a very affordable price. A big applause to you. 👏👏  

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...