Jump to content

Listen to that little voice in your head


Recommended Posts

Why is it when that little voice says, "This is a bad idea," we always want to talk ourselves out of it?

I had the low blood sugar jitters earlier, but insisted to myself that I'd be able to oil an especially tiny cap jewel on my friend's Omega 1001. With lots of concentration, I nailed it.

image.png.10deb1c64aaebe008baaf7f270b60280.png

But when I put the hole jewel on top, it was too much oil and it squoze out everywhere. It didn't spread on the cap jewel much thanks to the epliame I'd applied, so it was more than it looked like from the top.

Back in the cleaner, dried, re-epilamed, dried. Time for a second try, but now I was more shaky even than the first time.

"This is a bad idea," my brain told me.

"Take a hike, brain," I said as I watched the oiler jiggle into my microscope's frame.

And just like that, the jewel was a tiddlywink and flew out of sight in the blink of an eye.

With a strong UV flashlight and the waste of a lot of time I did find it on my desk, but that's some stress I didn't need in my day.

So friends, listen to your body, and listen to your brain when it tells you now's not the time for precision work.

  • Like 5
  • Haha 2
Link to comment
Share on other sites

8 hours ago, ManSkirtBrew said:

Why is it when that little voice says, "This is a bad idea," we always want to talk ourselves out of it?

I had the low blood sugar jitters earlier, but insisted to myself that I'd be able to oil an especially tiny cap jewel on my friend's Omega 1001. With lots of concentration, I nailed it.

image.png.10deb1c64aaebe008baaf7f270b60280.png

But when I put the hole jewel on top, it was too much oil and it squoze out everywhere. It didn't spread on the cap jewel much thanks to the epliame I'd applied, so it was more than it looked like from the top.

Back in the cleaner, dried, re-epilamed, dried. Time for a second try, but now I was more shaky even than the first time.

"This is a bad idea," my brain told me.

"Take a hike, brain," I said as I watched the oiler jiggle into my microscope's frame.

And just like that, the jewel was a tiddlywink and flew out of sight in the blink of an eye.

With a strong UV flashlight and the waste of a lot of time I did find it on my desk, but that's some stress I didn't need in my day.

So friends, listen to your body, and listen to your brain when it tells you now's not the time for precision work.

Haha now you know. Feed that blood sugar up to where its stable. 

Link to comment
Share on other sites

19 minutes ago, oldhippy said:

When I hear that voice in my head and I start talking back. I'll know it's off to the funny farm for me. 🤣

When we're younger its the voice of reason, when we're older and it tells us to do unreasonable things then it's the voice of insanity. Not to worry you wont be alone we're all heading in that direction sooner or later 🙂

1 minute ago, RichardHarris123 said:

Have a few beers, full of sugar and we all know being drunk is perfect for watch repair.  

When we're drunk we think it's a perfect state for doing lots of things 😅.  Sooooo glad i dont drink anymore, can you imagine?  😆

  • Haha 2
Link to comment
Share on other sites

Posted (edited)
1 hour ago, rossjackson01 said:

Never touched alcohol in my life. I don't need alcohol to be stupid. Just comes naturally.

I've never touched my life without alcohol 🤣.  I'm your complete opposite Ross

Edited by mikepilk
  • Like 2
  • Haha 4
Link to comment
Share on other sites

6 hours ago, mikepilk said:

I usually don't need to reapply epilame.

I probably don't either, but it's peace of mind for me after re-cleaning the jewel. Maybe I'm too **BLEEP** retentive for my own good.

Link to comment
Share on other sites

I'm a teetotaler. Many members of my family are alcohol intolerant. 

When I was a baby, my parents gave me a teaspoon of Woodwards Gripe Water and I turned cherry red and passed out for a day. They rushed me to the doctor the next morning and he had a good laugh. Those were the days when baby formulations contained alcohol.

I remember watching a darts competition where one of the contestants said that a certain level of alcohol is needed to calm the nerves and stop the shakes. I wonder if that works in watchmaking. 🤔

  • Haha 1
Link to comment
Share on other sites

Posted (edited)

A method I use now is assemble the jewels & Chaton then hold it steady steady with tweezers and lubricate with an auto oiler. It takes some practice but the controlled amount of oil is absolutely in the middle. 
 

ps I think I our Mark uses this method 

Edited by clockboy
Link to comment
Share on other sites

Posted (edited)
1 hour ago, clockboy said:

A method I use now is assemble the jewels & Chaton then hold it steady steady with tweezers and lubricate with an auto oiler. It takes some practice but the controlled amount of oil is absolutely in the middle. 
 

ps I think I our Mark uses this method 

Would like to do it this way, however the cost of an auto oiler is prohibitive. Ah well. 

 

Although. just seen these and am thinking about them. What do members think? 

https://www.ebay.co.uk/itm/193591257965?itmmeta=01HYV7YKH2YSFS1X47KGGR9EYV&hash=item2d12f02b6d:g:zLkAAOSw-jBhn1yx&itmprp=enc%3AAQAJAAAA4K8V03d7GCxVXExFkKQf8lxskAAWaKftxSv2442lZOV71McerFS9kBH1OEgn0wB3IPBtyUvP29aP67foi0y%2F4LlI0ZzaZGzRrLsn7mAUNCSMsP2%2BNKZ3Rv1U%2FcsB7RQ3MFRAGFOflqxsJHu0GO8IPqbdFaUB3AV5UjVJ3zN1vhhhAmGlwjYVgq5YCPJAZBqhXAJxnxbLlF%2Fswdvog08XJ1KVBBfd2kmSi9PrtslZjkNMkDzyHRAZjLIST6r2mU7oMuNgTyORXznN7f3iykMdd6xBDLEVW4DlGxkSxkihib44|tkp%3ABFBMzrj65_Zj

Edited by rossjackson01
More information
Link to comment
Share on other sites

On 5/26/2024 at 4:12 AM, ManSkirtBrew said:

Why is it when that little voice says, "This is a bad idea," we always want to talk ourselves out of it?

I had the low blood sugar jitters earlier, but insisted to myself that I'd be able to oil an especially tiny cap jewel on my friend's Omega 1001. With lots of concentration, I nailed it.

image.png.10deb1c64aaebe008baaf7f270b60280.png

But when I put the hole jewel on top, it was too much oil and it squoze out everywhere. It didn't spread on the cap jewel much thanks to the epliame I'd applied, so it was more than it looked like from the top.

Back in the cleaner, dried, re-epilamed, dried. Time for a second try, but now I was more shaky even than the first time.

"This is a bad idea," my brain told me.

"Take a hike, brain," I said as I watched the oiler jiggle into my microscope's frame.

And just like that, the jewel was a tiddlywink and flew out of sight in the blink of an eye.

With a strong UV flashlight and the waste of a lot of time I did find it on my desk, but that's some stress I didn't need in my day.

So friends, listen to your body, and listen to your brain when it tells you now's not the time for precision work.

oh boy, I know how that feels!

on the up-side: at least you got that soothing feeling of finally finding the jewel. 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • This is an 8 day duration Longcase clock. I has two key holes and it should have two lines of gut that when you wind it up they wind around the barrels. It strikes on the hour with rack striking. It also has silent and strike work.  Replacing the suspension spring is easy. I can't quite make out the name on the movement. Can you tell me please. It has a brass arched dial   does it measure 12 inches across? With the name and place I should be able to date it A photo of the case would be nice.   Richard long case clocks do not have fusee movements. 30 hour Longcase clocks work on an endless chain and have a single weight plus what is called a donut which is a small weight that helps the chain to run and hang correctly.  
    • 🤔 it runs from AC  electric. Perhaps a picture would better explain my set up, if you laugh i won't speak to you again 🤣 . Prepare to be blown away, are you ready ?  You haven't said " I was born ready " yet.   I'm waiting 😄
    • I cleaned the balance and pallet fork with hexane and a brush as well as peg wood for the spring. The spring which were on the main plate went into the regular cleaning: ultrasonic in lighter fluid for wash ultrasonic in lighter fluid for rinse 1 ultrasonic in IPA for rinse 2 Dried out with hair drier But the movements in this case were really unbelievably dirty.  I'll add picture today or tomorrow when I have my sd card reader and can extract them from the microscope camera.  Like if they had spent some time buried in the woods outside of a case so I am not sure that learning to clean such is really actively useful.
    • Hello, if you have seen some of my posts since I started in this forum you know that I am new to watch making and I have had my share of mishaps but I think here is an accurate statement of where I am: 1) I think I can disassemble and reassemble an ST36 correctly without damaging the hairspring or loosing parts (most of the time) 2) I think I can clean a movement which is reasonably dirty (a new movement or one like the 6T15 I worked on which has 15 year old lubrication but no actual dirt or water ingress). 3) I have an idea of how to lubricate a simple movement but not practiced much and I am pretty sure I am messing it up 4) I made a watch out of an ST36 and parts.  I messed up doing the same for an NH35 as I cut off the wrong dial feet (I swear I checked which I needed to keep and then somehow cut those off).   Here are the different things I did to learn (mostly in order) Learned to disassemble and reassemble the ST36 and broke the setting lever screw and messed up royally the hairspring in doing so.  I have had some success correcting some of the hairspring mess then made it worst when trying to completely correct it.  I have put repairing hairspring aside for a bit Disassembled and reassembled a cheap Chinese skeleton 2650G movement with center second Disassembled and reassembled a cheap Chinese Date, automatic and center second movement DG2813 ( mostly a Miyota clone for the base movement and automatic works but different for the date) almost successful but lost the spring for the date jumper Disassembled cleaned reassembled and lubricated a 15 year old 6T16.  Nothing lost nothing broken but the movement is working worst than before with a crazy timegrapher reading.  This came from a watch I haven't put it back in yet Disassembled cleaned and gave up on reassembling 2 junk slava 2414 movements coming as part of a set of broken soviet movements     So finally here is my question.  What do you think I should work on/practice next?   In term of available movement I mostly have a new ST36 and a new NH35.  I was thinking about practicing more with the ST36 trying to correctly clean and lubricate it.  I also thought, now that I have a working microscope camera and I should have a reader for the SD card soon I can not only take pictures but videos.  If I filmed the process and posted it would it be too much to ask for comments on what I should do different/better and what I am doing correctly?  I could try to do that with the NH35 too but with the date and automatic works it will be more complicated and I only have Moebius 800 and Molikote DX so no lubrication for the barrel.
    • Those springs are not the easiest to deal with for beginners. How are you cleaning them and what with ? 
×
×
  • Create New...