Jump to content

Listen to that little voice in your head


Recommended Posts

Why is it when that little voice says, "This is a bad idea," we always want to talk ourselves out of it?

I had the low blood sugar jitters earlier, but insisted to myself that I'd be able to oil an especially tiny cap jewel on my friend's Omega 1001. With lots of concentration, I nailed it.

image.png.10deb1c64aaebe008baaf7f270b60280.png

But when I put the hole jewel on top, it was too much oil and it squoze out everywhere. It didn't spread on the cap jewel much thanks to the epliame I'd applied, so it was more than it looked like from the top.

Back in the cleaner, dried, re-epilamed, dried. Time for a second try, but now I was more shaky even than the first time.

"This is a bad idea," my brain told me.

"Take a hike, brain," I said as I watched the oiler jiggle into my microscope's frame.

And just like that, the jewel was a tiddlywink and flew out of sight in the blink of an eye.

With a strong UV flashlight and the waste of a lot of time I did find it on my desk, but that's some stress I didn't need in my day.

So friends, listen to your body, and listen to your brain when it tells you now's not the time for precision work.

  • Like 5
  • Haha 2
Link to comment
Share on other sites

8 hours ago, ManSkirtBrew said:

Why is it when that little voice says, "This is a bad idea," we always want to talk ourselves out of it?

I had the low blood sugar jitters earlier, but insisted to myself that I'd be able to oil an especially tiny cap jewel on my friend's Omega 1001. With lots of concentration, I nailed it.

image.png.10deb1c64aaebe008baaf7f270b60280.png

But when I put the hole jewel on top, it was too much oil and it squoze out everywhere. It didn't spread on the cap jewel much thanks to the epliame I'd applied, so it was more than it looked like from the top.

Back in the cleaner, dried, re-epilamed, dried. Time for a second try, but now I was more shaky even than the first time.

"This is a bad idea," my brain told me.

"Take a hike, brain," I said as I watched the oiler jiggle into my microscope's frame.

And just like that, the jewel was a tiddlywink and flew out of sight in the blink of an eye.

With a strong UV flashlight and the waste of a lot of time I did find it on my desk, but that's some stress I didn't need in my day.

So friends, listen to your body, and listen to your brain when it tells you now's not the time for precision work.

Haha now you know. Feed that blood sugar up to where its stable. 

Link to comment
Share on other sites

19 minutes ago, oldhippy said:

When I hear that voice in my head and I start talking back. I'll know it's off to the funny farm for me. 🤣

When we're younger its the voice of reason, when we're older and it tells us to do unreasonable things then it's the voice of insanity. Not to worry you wont be alone we're all heading in that direction sooner or later 🙂

1 minute ago, RichardHarris123 said:

Have a few beers, full of sugar and we all know being drunk is perfect for watch repair.  

When we're drunk we think it's a perfect state for doing lots of things 😅.  Sooooo glad i dont drink anymore, can you imagine?  😆

  • Haha 2
Link to comment
Share on other sites

Posted (edited)
1 hour ago, rossjackson01 said:

Never touched alcohol in my life. I don't need alcohol to be stupid. Just comes naturally.

I've never touched my life without alcohol 🤣.  I'm your complete opposite Ross

Edited by mikepilk
  • Like 2
  • Haha 4
Link to comment
Share on other sites

6 hours ago, mikepilk said:

I usually don't need to reapply epilame.

I probably don't either, but it's peace of mind for me after re-cleaning the jewel. Maybe I'm too **BLEEP** retentive for my own good.

Link to comment
Share on other sites

I'm a teetotaler. Many members of my family are alcohol intolerant. 

When I was a baby, my parents gave me a teaspoon of Woodwards Gripe Water and I turned cherry red and passed out for a day. They rushed me to the doctor the next morning and he had a good laugh. Those were the days when baby formulations contained alcohol.

I remember watching a darts competition where one of the contestants said that a certain level of alcohol is needed to calm the nerves and stop the shakes. I wonder if that works in watchmaking. 🤔

  • Haha 1
Link to comment
Share on other sites

Posted (edited)

A method I use now is assemble the jewels & Chaton then hold it steady steady with tweezers and lubricate with an auto oiler. It takes some practice but the controlled amount of oil is absolutely in the middle. 
 

ps I think I our Mark uses this method 

Edited by clockboy
Link to comment
Share on other sites

Posted (edited)
1 hour ago, clockboy said:

A method I use now is assemble the jewels & Chaton then hold it steady steady with tweezers and lubricate with an auto oiler. It takes some practice but the controlled amount of oil is absolutely in the middle. 
 

ps I think I our Mark uses this method 

Would like to do it this way, however the cost of an auto oiler is prohibitive. Ah well. 

 

Although. just seen these and am thinking about them. What do members think? 

https://www.ebay.co.uk/itm/193591257965?itmmeta=01HYV7YKH2YSFS1X47KGGR9EYV&hash=item2d12f02b6d:g:zLkAAOSw-jBhn1yx&itmprp=enc%3AAQAJAAAA4K8V03d7GCxVXExFkKQf8lxskAAWaKftxSv2442lZOV71McerFS9kBH1OEgn0wB3IPBtyUvP29aP67foi0y%2F4LlI0ZzaZGzRrLsn7mAUNCSMsP2%2BNKZ3Rv1U%2FcsB7RQ3MFRAGFOflqxsJHu0GO8IPqbdFaUB3AV5UjVJ3zN1vhhhAmGlwjYVgq5YCPJAZBqhXAJxnxbLlF%2Fswdvog08XJ1KVBBfd2kmSi9PrtslZjkNMkDzyHRAZjLIST6r2mU7oMuNgTyORXznN7f3iykMdd6xBDLEVW4DlGxkSxkihib44|tkp%3ABFBMzrj65_Zj

Edited by rossjackson01
More information
Link to comment
Share on other sites

On 5/26/2024 at 4:12 AM, ManSkirtBrew said:

Why is it when that little voice says, "This is a bad idea," we always want to talk ourselves out of it?

I had the low blood sugar jitters earlier, but insisted to myself that I'd be able to oil an especially tiny cap jewel on my friend's Omega 1001. With lots of concentration, I nailed it.

image.png.10deb1c64aaebe008baaf7f270b60280.png

But when I put the hole jewel on top, it was too much oil and it squoze out everywhere. It didn't spread on the cap jewel much thanks to the epliame I'd applied, so it was more than it looked like from the top.

Back in the cleaner, dried, re-epilamed, dried. Time for a second try, but now I was more shaky even than the first time.

"This is a bad idea," my brain told me.

"Take a hike, brain," I said as I watched the oiler jiggle into my microscope's frame.

And just like that, the jewel was a tiddlywink and flew out of sight in the blink of an eye.

With a strong UV flashlight and the waste of a lot of time I did find it on my desk, but that's some stress I didn't need in my day.

So friends, listen to your body, and listen to your brain when it tells you now's not the time for precision work.

oh boy, I know how that feels!

on the up-side: at least you got that soothing feeling of finally finding the jewel. 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I saw mention of the super glue and bolt method on various forums. I wondered if there’d be any problem with that given the watch is titanium. Will the glue or the acetone stain the metal? Titanium is supposed to be resistant to corrosion, but sometimes certain metals react with chemicals unexpectedly.   If it doesn’t stain or scratch the watch and can be completely removed with acetone, the bolt and glue method seems like a clever last resort approach.   However, I don’t think I’m ready to use that method on this watch. The watch is new, and it was a gift, and it wasn't cheap. Also, +10 spd really isn’t that big of a deal. I can just correct it once a week to keep it within a minute of the correct time. If I had a manual wind watch I’d have to wind it more often than every week, so I can think of it that way.   I think neverenoughwatches is right that this is the wrong watch to use to start learning how to repair watches. I think I’ll either buy the Unitas 6498 or a clone to do the watch fix course. I may also get a $200 invicata pro diver with the SW200 movement that I believe is also in the tag heuer aquaracer to start learning watch repair. It uses the “caliber 5” which I believe is just an SW200-1 or ETA 2824-2 with a tag decorated rotor.   How long would you all say it takes to develop basic competence working on mechanical watches? What level does one end up at after doing the first three watch fix courses?   I mentioned in my intro post that I was emboldened to try to regulate the tag watch by my success in swapping out a broken quartz movement on a friends 15 year old fashion watch a month or so ago. It had a Ronda 762 which was available new from Esslinger for $10. I didn’t have the right tools or any experience but I was able to remove the movement, swap the dial and hands, and reassemble the watch to fix it. It appears to work fine now. The only reason I attempted it though was because they were going to throw the watch out, so the risk was really just the $10 for the new movement. The risk on this aquaracer is much higher and probably above my risk threshold.   Also thanks very much for all your suggestions and help. I’ll post some more images of the watch shortly.
    • Thats just the tip of the iceberg, they have no idea of what is yet to come.  When you start grabbing stranger's left hands to turn their wrists to see what watch they are wearing then thats when they need to start worrying. Erm  not that i...ah-hem....have done that.
    • Can you get a top view with power off, balance at rest? The hairspring could be off center just enough that it is touching something when running (center wheel, stud, regulator). Thing is, on older stuff in particular, if you find a balance complete there's about a 99.99% chance the hairspring of the new balance will need some adjustment to work correctly.   Also, not much use getting concerned with the rate until you get the amplitude up.
    • Those pins look awfully tight. Does the hairspring slide freely between them when you adjust the rate?  
    • John will ask this question anyway: how did the watch run before your service?
×
×
  • Create New...