Jump to content

Late to the game, but finally here.

JHD

By JHD
in Introduce Yourself Here

 Share

Recommended Posts

JHD New Member

JHD

Posted
Posted

I'm Jeff, live in middle Tennessee USA.  Just turned 55.  Work from home.  Always loved tools and tinkering.  Past woodworker, leatherworker.  Current IT professional.  Not real crazy about 'collecting' or hobbies for hobbies sake.  My current hobby is actually trying to declutter and get life back on track.

Never really considered watch repair/making as a hobby or pass time.  Graduated college in the 90's with an art degree and did some jewelry making back then.  Watches were always a mystery of science and technology that I didn't think were approachable.

Well, now I've been gathering some cheap tools and movements.  I've changed some batteries on quartz movements but haven't turned a screwdriver on anything mechanical yet.  I'm afraid of losing or breaking  a part and rendering something I paid for useless.

Plus, one of the big rules in this is to remain calm, put yourself in a clear frame of mind and relax before starting a project.  I have not been able to get there yet.  Also, my vision sucks and I'm pondering what type of visual assistant I need.  I've got some cheap loupes, but I would like something with a clear view where I can use both hands to work.

  • Like 1
Link to comment
Share on other sites
eccentric59 WRT Addict

eccentric59

Posted
Posted

Hi Jeff. Welcome to WRT.

For a moment there I thought i was reading my own biography. I too work in IT, have a degree in art and love all things mechanical. If you're left-handed too, then I'll have to check Ancestry.com to see if I have any relatives in TN. 😉

I've found the best solution for me was to get a set of these and clamp them to a pair of readers.

image.png.3219fc179814a6d2293ccaffa3495f0c.png

 

If you stick with it, you'll want to get a microsocpe, but that's a ways down the road. BTW, in order to not frustrate yourself in the beginning, You'll need to get some decent screwdrivers and tweezers, and learn to dress them properly to keep those tiny parts from flying all over the place.

  • Like 2
Link to comment
Share on other sites
HectorLooi Distinguished Member

HectorLooi

Posted
Posted

Welcome Jeff. 

As a newbie, you are bound to drop things and launch things across the room. We all went through that phase. It gets less frequent as time goes by though, trust me.

In the meantime, get yourself good, comfy knee pads, a headlight and a magnetic sweeper.

Enjoy.

  • Haha 3
Link to comment
Share on other sites
JHD New Member

JHD

Posted
  • Author
Posted
8 hours ago, eccentric59 said:

Hi Jeff. Welcome to WRT.

For a moment there I thought i was reading my own biography. I too work in IT, have a degree in art and love all things mechanical. If you're left-handed too, then I'll have to check Ancestry.com to see if I have any relatives in TN. 😉

I've found the best solution for me was to get a set of these and clamp them to a pair of readers.

image.png.3219fc179814a6d2293ccaffa3495f0c.png

 

If you stick with it, you'll want to get a microsocpe, but that's a ways down the road. BTW, in order to not frustrate yourself in the beginning, You'll need to get some decent screwdrivers and tweezers, and learn to dress them properly to keep those tiny parts from flying all over the place.

I think you're safe - right handed here!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mikepilk
      AS 1475 REFURBISH (Recalled to life)

      By mikepilk · Posted

      I've just finished refurbishing a Memostar Alarm with AS 1931 movement (same as 1945 but with date and running at 21600). I was also surprised how many parts are available at Cousins. Like you, I was missing the alarm stem (Cousins stock them) and I needed new crowns. It's a nice simple movement for an alarm, easier to service than a Seiko Bell-Matic. BTW I made a note in my Servicing spreadsheet: "Pull out winding stem before removal".  It may have just been wear on my movement, but I found that the yoke could move out of the clutch if the stem was removed in the normal position (like some ETAs). 
    • LittleWatchShop
      AS 1475 REFURBISH (Recalled to life)

      By LittleWatchShop · Posted

      I picked up this alarm watch at a flea market several months ago and recently decided to investigate.  I am not finished, but well on my way. As you can see, there was significant water damage.  Running these parts through my L&R cleaner was not enough to clean them, so I did manual cleaning with one-dip and cotton swab (the dense pointed kind).  The wig-wag was stubborn--the two gears would not release from the plate.  I soaked it in Kroil overnight and that did the trick. There was some rust on the balance staff, but not actually on the pivots themselves.  Nevertheless, I chucked it a step-chuck on my lathe and burnished the pivots. The watch is running and I have confirmed that the alarm drive train is functioning.  Since I am missing a stem for the alarm, I have not done the final assemble of the alarm components.  Surprisingly, there are lots of parts available for this movement on Cousins.  I will probably get a couple of stems and maybe some other parts that I deem necessary. The watch is running at weak amplitude (about 190) and shows some poising issues.  I will work on that. The last two pictures are after partial reassembly.    
    • watchweasol
      Greetings from India.

      By watchweasol · Posted

      Hello and welcome to the forum.    Enjoy
    • Knebo
      DIY centre seconds support base

      By Knebo · Posted

      Exactly!  It may not really be a joke, but the actual truth.
    • HectorLooi
      DIY centre seconds support base

      By HectorLooi · Posted

      The movement is placed on the base and the centre screw is raised until it contacts and supports the centre pinion, thus stopping the centre pinion from sinking in when the second hand is pressed on.
×
×
  • Create New...