Jump to content

Improved Ebooks Of Staking Tools And How To Use Them

tomcolson

By tomcolson
in Tools & Equipment

 Share

Recommended Posts

tomcolson Member

tomcolson

Posted
Posted
All,

 

I've posted two new pdf versions of the complete eBook for K&D's 1910 "Staking Tools and How To Use Them" in my dropbox (download links below). 

 

The first is an improved version of the one previously available with high resolution (1200dpi) images only. I found a mistake in the front cover image and corrected it. Otherwise, the book is the same as before.

 

I've also created a new lower resolution version with full text search. The images are 600dpi and still look good, but the file is now half the size of the high rez version and includes the ability to search the text. I tested the text search in many different ways and the quality of the OCR by Adobe Acrobat it surprisingly good. I couldn't find a single mistranslation.

 

Neither of the files are small, but it's 163 pages so that part isn't surprising.

 

Enjoy!

 

Tom

 

  • Like 3
Link to comment
Share on other sites
  • 2 weeks later...
tomcolson Member

tomcolson

Posted
  • Author
Posted

Thanks for the kind words, everyone. I'll continue to make the results of my research available in hopes of helping everyone out the next time a K&D question comes up.

 

I recently acquired a copy of K&D's "Book of Tools No 6". It was published in 1908, two years prior to "Staking Tools and How To Use Them".

 

I've just started the scanning and conversion process. I hope I can scan the beautiful illustrations well enough to do them justice. Compared to a modern half-toned image, they have a pleasing crispness of line. 

 

This one is only(?) 148 pages, so maybe it will go a little faster than the previous book.

 

Tom

Link to comment
Share on other sites
  • 10 months later...
  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Part swapper to part maker

      By Neverenoughwatches · Posted

      Thanks Rich, its really not that difficult to make them, simple ones anyway. Cousins didn't have the part though i could find it on ebay at 6.50. I figure i earned about £1.50/ hr . It paid for the diamond files i bought.
    • mikepilk
      How to remove shock settings from Smiths 512 movement

      By mikepilk · Posted

      If you look at this thread, you can see I had exactly the same problems with balance springs with 2 prongs on a Smiths 627. The slots in the chaton were not big enough to get the ends of the spring out. I had to bend them to get them out and back in. Not ideal. I don't fancy having to do it again as they could easily break, and where would you find replacements? I didn't come across the 3 prong type.     
    • mikepilk
      Breguet Exhibition at London Science Museum

      By mikepilk · Posted

      I visited the Breguet Exhibition today. https://www.sciencemuseum.org.uk/about-us/press-office/rare-timepieces-unveiled-new-display-science-museum The Science Museum now holds the collection of "The Worshipful Company of Clockmakers" - "The collection includes more than 600 watches, 90 clocks, 30 marine chronometers and a number of fine sundials and examples of hand engraving, mapping the history of innovation in watch and clock making in London from 1600 to the present day." It's well worth a visit. They have some amazing pieces by the likes of Harrison, Breguet, Tompion etc . I've visited twice before but decided to go and see the Breguet Exhibition. Maybe I was expecting too much, as on reflection, "More than 20 extraordinary timepieces designed by inventor and watchmaker Abraham-Louis Breguet " isn't going to take up that much space. In reality, it's just one cabinet. But, Oh those watches, stunning 🤩 , e.g. (No 1297 was made for George III and is valued about £1m)   I tried a couple of pics, but with subdued lighting and taking through glass, they aren't good. I like thin hands on a watch - how about these (I think this is a split second chrono)   And this one, with all it's complications, is only 10mm thick !   What I found very interesting were a few very old machines for making watch parts, like this 17th Century gear cutter. The disc below has concentric rings with holes in, so that is can be set to cut varying teeth numbers.       
    • RobS
      How to remove shock settings from Smiths 512 movement

      By RobS · Posted

      Firstly sorry for poor image quality I only have an iPhone for photos.    Im working on a 512 movement and I’ve had some trouble with the “jewels”. I’ve got the metal one out, but when I tried to put it back the three sides of the spring seem to need pressing all at once to fit it as there are three “holes”. I get two corners in but as I go for the third the first two pop out! Constantly I’ve lost the spring. I’ve done the similar ones on seiko movements without trouble. Assuming I find it/a replacement, what am I missing!   on the other side with the only ruby in the movement is a setting with no “gap”at all. How do I get the spring out, and of course get it back in!    What am I missing!    thanks in advance.    Rob
    • Geotex
      Roland Ranfft RIP

      By Geotex · Posted

      Links like that are the reason I routinely donate to the Internet Archive - they are the last safe house for a tremendous amount of useful info that is otherwise lost.
×
×
  • Create New...