Jump to content

Do Bergeon out source their tool production to China

valleyguy

By valleyguy
in Tools & Equipment

 Share

Recommended Posts

valleyguy Watch Enthusiast

valleyguy

Posted
Posted (edited)

I've seen  a 3 pc set of tools on ali that i'm sure are genuine bergeon, i've looked at the photo on bergeons site and compared it side by side with the ali picture of the tools, i can't tell the difference in the tools, it as the bergeon reference number on the ali listing and box but a chinese brand name, do Bergeon get any tools made in China or are they just good fakes.

Edited by valleyguy
Link to comment
Share on other sites
Paul80 WRT Addict

Paul80

Posted
Posted

Having worked in production engineering for years I can say absolutely yes, not everything but many of their tools are too identical to the Chinese ones to be anything other than from the same production line.

Whether the Chinese supplied versions have the same QC as the ones they send to Bergeon that is something that is up for debate.

I have quite a few China supplied tools and I have no doubt they are identical to the Bergeon branded tools, same tool marks and fully interchangeable parts, far to identical to just be a copy.

The other clue is to look at the Bergeon catalogue then look at the size of the factory/warehouse its just too small to be able to make all of that huge range of tools.

Watch out for the replies from the rose tinted specs brigade who can see no wrong in the dodgy Swiss watch industry and industry that is built on a lie.

  • Like 3
Link to comment
Share on other sites
Paul80 WRT Addict

Paul80

Posted
Posted

3 examples of tools Bergeon sell that are clearly made in China

Go on Aliexpress and search for the following items

1. Automatic oiler

2. Broken Screw Remover

3. Hand Press (the 4 head version)

Unfortunately you do need both Chinese and the Bergeon branded versions side by side to see just how obvious it is they came out of the same factory

  • Like 3
Link to comment
Share on other sites
valleyguy Watch Enthusiast

valleyguy

Posted
  • Author
Posted (edited)

This is the set of the 3 pin vices on ali that look like the bergeon set 30026 d.

Would you say these are the same or just a good copy.

The box of 3 in photo 4 not showing bergeons name is genuine, it's a photo from bergeons site, the others  pics are from ali, do you think they're out of the same factory, as anyone got a bergeon set of these do they look the same.

 

 

be30026d.jpg

b30026d.jpg

30026d.jpg

beligwho.jpg

HTB1k.2scmSD3KVjSZFKq6z10VXaU.jpg

Edited by valleyguy
Link to comment
Share on other sites
nickelsilver Distinguished Member

nickelsilver

Posted
Posted

There's darn close, and there's exactly the same. I have no interest in defending Bergeon, but for them to say Swiss Made a certain percentage of the work has to be done here. Maybe, could be, they're having stuff made up to a point in China, then finishing here? I can't say for certain.

 

I know the Chinese knock offs of Horia stuff does look very similar, down to the white and green plastic trays for the pushers, but it's not the same, and I bet the guys who run the (quite small) operation in Delemont aren't too happy their stuff is getting copied.

  • Like 1
Link to comment
Share on other sites
JohnFrum WRT Addict

JohnFrum

Posted
Posted (edited)

Does the original Horia have an upper knurled ratchet speeder above the main knurled thimble?

The Ruihua copy has what appears to be a speeder but is actually just an extension of the thimble. 
 

There are differences in the surface finishing of the Yongjui and Bergeon 1A automatic oilers.  The Yongjui also has an upper O ring around the reservoir that the original Bergeon does not have.  The parts are interchangeable. I actually have a Bergeon needle in my Yongjui. 

Edited by JohnFrum
Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted
On 2/13/2023 at 12:58 PM, valleyguy said:

Bergeon

The important thing to remember with Bergeon Is there a distributor of stuff. Basically they contract with people to manufacture stuff. For instance Rodico Is manufactured in Canada for some other purpose and they buy the entire supply each year. The amazing things you learn when you go to their headquarters. No they did not say what it was previously manufactured for they just buy the entire lot. So it makes sense that they would outsource tools to China because they can. It would also make sense as to why there are so many cloned tools in the same boxes that look remarkably identical to the original because they were probably cloned in the same location.

 

 

Link to comment
Share on other sites
valleyguy Watch Enthusiast

valleyguy

Posted
  • Author
Posted (edited)

The genuine Bergeons are around the $140 - $150, the ali ones around $20 - $30 depending on seller.

 

I ended up getting a set of 4 pin vices made by eclipse, cousins website says they are made in the UK, they look and feel well made all steel construction so should last me years, i had to give them a little clean they came well oiled, maybe not as good as the swiss ones but a step up from the chinese version.

Edited by valleyguy
  • Like 1
Link to comment
Share on other sites
  • 3 weeks later...
  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


×
×
  • Create New...