Jump to content

About to study Horology at uni - hello everyone!

Kettlenhhob

By Kettlenhhob
in Introduce Yourself Here

 Share

Recommended Posts

Kettlenhhob New Member

Kettlenhhob

Posted
Posted

Hi everyone

I’ve been a member for a little while but this is my first, and I’m sure won’t be my last, post.

After spending the last couple of years learning about and practicing watch repair including Mark’s course I’m about to start a 3 year Horology degree at Birmingham City Uni in September.

I’m especially hoping to hear from anyone who does watch repair or watchmaking as a career as this is something I want to eventually pursue as a long term career. Any advice, tips/tricks and general wisdom about the industry - self employed or as an employee - would be really cool to hear. I’m not sure if there a section for that on here but if there is a nudge in the right direction would do!

I’m not expecting there will be but would be great to chat with anyone who’s done the course at BCU too I’m very excited for the course and would love to hear more about others experiences.

Thanks for reading and nice to meet you all 

nickelsilver Distinguished Member

nickelsilver

Posted
Posted

Good for you- 3 years is a big commitment, so I hope you do pursue it for the long term!

 

I'm a professional, but can't think of any tips other than to read and learn as much as possible in addition to school. I see from the pics on their site they have WOSTEP models of the escapement and balance wheel, hopefully they teach the escapement work like WOSTEP does (I have met many school grads for whom escapement adjustment is still a dark mystery, including Swiss school grads- so one tip: learn the escapement!). If you have any specific questions ask away.

Kettlenhhob New Member

Kettlenhhob

Posted
  • Author
Posted

Hi Nickelsilver

Thanks for taking the time to reply to me. That sounds like good advice honestly, I have a few books at the moment: Watchmaking by George Daniels and a few others I bought when I first became interested. Are there any in particular you can recommend from a more professional stand point like textbooks or something? I think this course is more all-encompassing than WOSTEP in the sense we will do more general horology related things such as building our own clocks as well as some CAD work too. I almost did a WOSTEP course at BSoW (unfortunately due to covid and financial issues I didn't get to see my application through to the end) and I understand that having that qualification greatly helps with employability so hopefully aspects such as the escapement as you mentioned are covered similarly in my course. I can see you're based in Switzerland so I imagine the job market might differ from the UK but I'm interested how watchmakers usually operate in terms of employment. Is it possible to be self employed and still do commercial work or would you have to be employed on a salary by one of the big watch brands? Just interested to know what it's going to be like once I'm qualified and looking for work really!

oldhippy Distinguished Member

oldhippy

Posted
Posted

I have been retired for many years. I'm a fully qualified watch & clockmaker with around 30 years’ experience. Had my own business working on high grade clocks mainly restorations and also valuations. Also worked for a top Antique shop, giving advice on what to buy at auctions when it came to clocks.   Eventually having to retire due to poor health. 

 

You can only learn so much from books, they don't tell you how to overcome many obstacles. The best way of learning is to get your hands dirty (I say that all the time when people ask me) If you can work for yourself that way you reap all the rewards yourself and if you are good at your work you will never look for work. The best form of advertising is word of mouth. When you have decided where you would like to start up your business do some research as to what to expect when it comes to repairs, such as is it place where it is full of clocks and good antique type, or is it a place where some cheap store just sells cheap watches and jewellery, poor or good stranded of living.

Hope this helps a little and good luck.  

  • Like 1
Drew Watch Enthusiast

Drew

Posted
Posted

Hi Kettle, 

Best of luck to you on your new journey. I am sure you will do great. I am looking forward to hearing more about your journey. 

-Drew

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • JohnR725
      What's your thoughts on this Rolex Sea-Dweller, ref. 16600, calibre 3135 project?

      By JohnR725 · Posted

      isn't it nice to have a decent case open or when the case doesn't want to be opened? In the case of a Rolex watch that supposed to pass specific water resistant testing you probably do need to tighten the back down. But they shouldn't be tightened so much that they risk stripping the threads out. Then the other problem that comes up is the gaskets can start to disintegrate and then getting the back off can be quite a challenge unless you have a really good tool and perhaps some penetrating oil to loosen things up. Yes really nice case marking. When I was in school we were taught to mark the cases and  the American watch and clockmakers Institute even had a? So if you joined at one time they would give you an identification number. They were explaining or giving an example of if the watches ever found in you have a unique number they can perhaps figure out the history of the watch or identify the body it's attached to for instance not that that probably comes up that often. So you got a unique number and even made a special metal stamp that you can purchase. It wasn't a super big aggressive stamp but still it left a mark in the back of the case. Then I heard from people at work on Rolex watches they were using a felt pen indelible but later on they decided that was bad because apparently the ink could release  chemicals although it seems like once it's dry that shouldn't be an issue. Then of course today was nice is you can keep computer records sealed have to mark anything at all I personally find it's best to leave no reference behind that you were even there. Especially when you have a beautiful watch that has no markings at all and now it has your scribbling all over it not good typically if there is a typical and watch repair?  a lot of minor repairs you don't need to do a complete servicing. But beyond a certain point you're going to have to take apart a lot of stuff you're going to disrupt the lubrication even if it looks perfect right now and yes you might as well just go ahead the service the whole thing. also in a watch like this where a lot of things seem to be going on the complete service would be better then you'll know exactly where you stand versus dealing with unknown mysteries for prior repair.
    • luiazazrambo
      Greetings from Whidbey Island.

      By luiazazrambo · Posted

      That Island looks pretty good on the pics I found. Must be nice to live there. Welcome! Are there many watchmakers over there?
    • LittleWatchShop
      I need a lifetime supply

      By LittleWatchShop · Posted

      I believe so. I thought about it the last time.
    • mikepilk
      I need a lifetime supply

      By mikepilk · Posted

      Could you fit a sapphire crystal? My 'daily wearer' Breitling Aerospace is 22 years old and there isn't a mark on the sapphire crystal.  
    • mbwatch
      Full plate watch, Suitable tool for adjusting & testing pallet stones?

      By mbwatch · Posted

      Oh that's neat. I typically use a thin strap of rodico laid over the pallet fork to affix it to the upper plate but it can be hard to retrieve sometimes. And as I did more research, I may have just found your own earlier explanation: https://learntimeonline.com/forums/topic/potence-clip-for-full-plate-p-ws/
×
×
  • Create New...