Jump to content

Hello from Stuttgart/Germany

Kalanag

By Kalanag
in Introduce Yourself Here

 Share

Recommended Posts

Kalanag Super WRT Addict

Kalanag

Posted
Posted

I‘d like to send greatings to all members and moderators here. My name is Karl and I enjoy my retirement after many active years as a mechanical engineer. My first steps in servicing watches as a hobbyist are about 30 years ago. At that time I had to learn from books and by doing (and destroying…). Meanwhile I watch the fantastic youtube tutorials which brought my interest in watchmaking up again.

After successfully servicing a Citizen ladies automatic and a Rx 3135 clone I started servicing my JLC with the 889/1 caliber. I stranded yesterday with oiling the combined bushings in which the escape wheel is running. This problem lead me to this forum and to my first question that I will post in a minute.

Regards Karl

  • Thanks 1
grsnovi Distinguished Member

grsnovi

Posted
Posted

Thanks for the intro @Kalanag welcome to the WRT forum! I'm also relatively new and I'm in the middle of my first service of an Elgin Grade 313 movement.

There was a time when I also wrangled mechanical engineering projects but like you, I'm also now retired. Watch projects are now something to keep me busy. Maybe when the pandemic lightens up I'll go back to travel?

  • Like 1
oldhippy Distinguished Member

oldhippy

Posted
Posted

Thank you for your introduction and welcome to this friendly forum.

We all look forward to your contributions and continued involvement. 

  • Like 1
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VWatchie
      What's your thoughts on this Rolex Sea-Dweller, ref. 16600, calibre 3135 project?

      By VWatchie · Posted

      Well, my fundamental stance is that I want to go in and out without leaving any trace other than a shining, perfectly running movement. So, no scratchings on the inside of the case back lid, no marred screws, no debris, no fingerprints, and so on. That is, my goal is to make it impossible for the FBI to track me down. As a professional, I suppose you might want to keep track of returning watches, but as @JohnR725 mentioned, we can keep detailed computer records without marking the watch at all. That may not be true for every watch, but luxury and COSC-certified movements do have unique numbers. John also says it’s best to leave no sign you were ever there, and I couldn't agree more. Now, suppose the Sea-Dweller I'm working on is one day scrapped, and you want to sell the case-back separately (perhaps the case was destroyed in a plane crash). Then the scribbles on the inside no longer reflect the current movement inside the case. Also, the engraving will likely halve the market value of the case back. It had been "sleeping" for about a week and a half. Yes, the "debris/old lubricant" theory is my hypothesis as well! It will be interesting to see what I find once I have time to start disassembling the movement.
    • MikeEll
      Help with repairing a quartz clock

      By MikeEll · Posted

      I've repaired a few of these, having some success with stripping and cleaning the mechanism.  They are so cheap though, its hardly worth the effort in many cases.
    • watchweasol
      Oldhippy

      By watchweasol · Posted

      Get well soon Old Hippy, torn muscles.,  not good
    • SwissSeiko
      A lathe with indexing that won't break the bank?

      By SwissSeiko · Posted

      Id love to see how he has the output shaft mounted to this setup, as I have the same rotary stage and stepper in my build.
    • Poljot
      Broken watch stem in watch crown

      By Poljot · Posted

      If you see at least one thread protruding, or even a half, then you may have a chance using this "tool", but don't squeeze hard. Lot's of patience, and if you notice any signs of loctite or other adhesives, then apply several drops of acetone on top of broken stem. Use heat (hair dryer) also. You should be able gradually turn it counterclockwise, just like i did on this broken Timex stem, which was glued with something like nail hardener. Then you can use an extender to save your broken stem. https://m.media-amazon.com/images/I/513DVvkfW5L.__AC_SX300_SY300_QL70_ML2_.jpg   You can also try cutting a small grove / slot on top of the broken stem to use 0.7mm flat screwdriver.   Depending on the Crown material and Stem material, you can try dissolving the stem. 
×
×
  • Create New...