Jump to content

Intro, new member in the US

pinehilljoe

By pinehilljoe
in Introduce Yourself Here

 Share

Recommended Posts

pinehilljoe New Member

pinehilljoe

Posted
Posted (edited)

I've always had an interest in watches.  I own a few higher end pieces. 

A Rolex Thunderbird, which I purchased in 1985, keeps perfect time, but has stopped autowinding.  The local watch maker suggested waiting until it stops running, then send it off to Rolex, the price will be the same.  I'm still debating to spend the $750 to $850 to have it refurbished.

A Pre-Moon Omega Speedmaster, keeps perfect time.  Was purchased in the UK, then passed on to me.

Universal Genève from the 50's, runs and keeps time.

SARB 033 bought before the prices got stupid.   These their time in the bank safety box. 

Hamilton Khaki, and too many Seiko 5s.  

Weekend beater is a Seiko Titanium quartz watch, I can wear it in the garden, or garage and it won't scratch.

Now I am attempting to get into the watch making or refurbishment.  I can change batteries and crystals, but would like to dive deeper.  

Current project is a Seiko 7009A purchased non-running, I am taking it apart and putting it back together.  Next I'm thinking of purchase a lower cost Seiko 5 in running condition, disassemble it, clean and reassemble, and see it still runs. 

Edited by pinehilljoe
Link to comment
Share on other sites
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • oldhippy
      Favourite timepiece.

      By oldhippy · Posted

      It is called a Garnish 
    • Jon
      Looking for advice on removing the glass and bezel

      By Jon · Posted

      Yes, Mine has a support for the blade that can be safely hit like this one https://www.amazon.co.uk/Rolson-62841-Tradesman-Knife/dp/B0044D9MC6/ref=sr_1_37?crid=3HWJF1HL4J8D7&dib=eyJ2IjoiMSJ9.X58oai8WcFho_-XqfR-lLQbU8lQKhf1vtFKAWbXR4EAhqVWR_eMy5h1DhaCULvkpA6XT0GaNFLHt_kJ0kPrhXFo0nYd8yJ4JgruoXDG9XjViAQOyAiBUkOhC9W9qQfGr0SMKpxIUrGOBkTjtTPTuM9IOTnb-dEAzbcZVvniVcEuMFGK9SITyDO6ryUU8ERkHt8f2Vy9Ks0QFO06KSJz65C2p7S3o2lOaUoO9kw61KyNtaaYYwdZzyuM2uRywODaigUn0u8RHMPR0dOa3WSrq8vE1iV5Et_561SFfvkhSGTQ.9QrdWVoCJpLVkrflNS1sxaY56ys4iiJspEFpUgLIRdg&dib_tag=se&keywords=stanley+knife&qid=1716289527&sprefix=stanley+knife%2Caps%2C77&sr=8-37 I use a brass hammer. You could use a very light pin hammer. A watchmaker's hammer would be a bit too light to use. I'm not sure of the weight, but looking at Cousins, it looks like a 60 or 84g brass hammer. I would go with the 84g one. A lot of the process is about feel, so you don't damage the case or bezel. Don't twist the tool! You may think it would make it easier and quicker, but that's when the damage starts to happen and be especially careful around the lugs. Once you have done a couple, you'll get a feel of it. Some bezels feel like they're not coming off and you start to doubt what you are doing. The trick is to be deliberate in your actions, rather than tentative. If you perform this task with the total belief that the bezel is coming off, that is exactly what will happen. First, be totally sure that the bezel comes off in the way you expect.   Rub the blade against a piece of 400 grit wet and dry until blunt
    • Neverenoughwatches
      Favourite timepiece.

      By Neverenoughwatches · Posted

      I do like the idea of clocks , you get so much more for your money than you do when buying a watch.
    • oldhippy
      Favourite timepiece.

      By oldhippy · Posted

      No but I have taken it out of its case to make sure all is well. 
    • Neverenoughwatches
      Breguet hairspring frequency

      By Neverenoughwatches · Posted

      I read recently that there are almost 600 different patterns of overcoil.
×
×
  • Create New...