Franktimex Posted December 15, 2021 Share Posted December 15, 2021 Does anyone know replacement parts for a 11anac movement. The Bulova part number is 574. It is a date driving wheel that I need. I have looked everywhere and am unable to find one. Is it the same in another movement maybe. Help would be appreciated I have looked on eBay,cousins and a exhausted google search thanks Link to comment Share on other sites More sharing options...
watchweasol Posted December 15, 2021 Share Posted December 15, 2021 Have you had a look at the parts database on the jules Borel site Link to comment Share on other sites More sharing options...
watchweasol Posted December 15, 2021 Share Posted December 15, 2021 Just had a look on the database there are a good listing of parts. Link to comment Share on other sites More sharing options...
Franktimex Posted December 15, 2021 Author Share Posted December 15, 2021 I just went to the website it said it’s discontinued Link to comment Share on other sites More sharing options...
JohnR725 Posted December 15, 2021 Share Posted December 15, 2021 50 minutes ago, Franktimex said: I just went to the website it said it’s discontinued According to the link below Your watch was made roughly between 1969 and 1976. Which is roughly 45 years ago which means basically all the parts have been discontinued as Bulova would no longer be manufacturing any of those parts. But that doesn't mean the parts aren't out there somewhere. The only thing disturbing from looking at the part up is that it doesn't appear to cross reference to anything else. But they probably made a lot of these so the parts are out there yes have to go and find them. http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&0&2uswk&Bulova_11ANACD Link to comment Share on other sites More sharing options...
Franktimex Posted December 15, 2021 Author Share Posted December 15, 2021 Yes it is maddening Link to comment Share on other sites More sharing options...
Franktimex Posted December 15, 2021 Author Share Posted December 15, 2021 I don’t want to have to spend 100 dollars for a 7 dollar part. But I guess this is the major pitfall of this trade and hobby Link to comment Share on other sites More sharing options...
VWatchie Posted December 15, 2021 Share Posted December 15, 2021 14 minutes ago, Franktimex said: I don’t want to have to spend 100 dollars for a 7 dollar part. But I guess this is the major pitfall of this trade and hobby Perhaps you can find a donor movement and that would give you a lot of parts either for later use or for sale. 1 Link to comment Share on other sites More sharing options...
Franktimex Posted December 15, 2021 Author Share Posted December 15, 2021 Oh yeah they are out there. They can be a gamble though. You know could be faulty or missing from a already scavenged movement. However my main question is does anyone out there know what movements can you interchange with this date wheel surely there must be someone who knows. Link to comment Share on other sites More sharing options...
Franktimex Posted December 15, 2021 Author Share Posted December 15, 2021 (edited) Is 11 Anacb and 11anacd interchangeably they are in the same family does anyone know this Edited December 15, 2021 by Franktimex Forgot word Link to comment Share on other sites More sharing options...
JohnR725 Posted December 15, 2021 Share Posted December 15, 2021 Just now, Franktimex said: However my main question is does anyone out there know what movements can you interchange with this date wheel surely there must be someone who knows. I thought we answered this question? Here's a popular place to look and it's free http://cgi.julesborel.com/ The new find your watch you end up here http://cgi.julesborel.com/cgi-bin/matcgi2?ref=BUL_11ANACD Then you click on your part number http://cgi.julesborel.com/cgi-bin/matcgi2?ref=Yc^DiiotUIfZgio Which tells you you're screwed there is no cross reference Discontinued and no cross reference. The problem is how popular was this part? Then one of the moderators did this to somebody asking a question so I will torture you with the same answer have fun reading. Then set up a search on eBay sooner or later almost everything shows up on eBay it might take a while. I remember were I will work as a watch that just needed a stem it took almost a year to get all the components for a variety of interesting reasons. The parts are out there just takes a while to find them or have them show up on eBay you feel lucky. If it's a part that broke a lot https://www.watchrepairtalk.com/topic/14621-parts-availability/#comment-168106 2 minutes ago, Franktimex said: Is 11 Anacb and 11anacd interchangeably they are in the same family does anyone this Then following the procedure above it looks like the answer is no http://cgi.julesborel.com/cgi-bin/matcgi2?ref=Yc^DiiotUIfZgim There is still a minor possibility that it does cross reference to something probably Bulova problem is we need a Bulova cross reference book I wonder if such a thing existed? This is the problem and watch repair is that not all the technical documentation filtered out of the factory. There just isn't a cross reference for every single watch your data Booker sheets a technical guide. It's the challenge of watch repair finding parts 1 Link to comment Share on other sites More sharing options...
Franktimex Posted December 15, 2021 Author Share Posted December 15, 2021 Cousinsuk Link to comment Share on other sites More sharing options...
Franktimex Posted December 15, 2021 Author Share Posted December 15, 2021 John it did not say there was no cross reference it said it was obsolete. Two movements can have the same part number. There is a interchagibility book I have seen it. However you are correct. Just thought this might be helpful Link to comment Share on other sites More sharing options...
JohnR725 Posted December 16, 2021 Share Posted December 16, 2021 37 minutes ago, Franktimex said: There is a interchagibility book The only minor problem with the cross reference book the reference material and everything else is it has a publishing date. There is always a tiny possibility something manufactured after the date might interchange. But there's also the likelihood that it interchange is with nothing. It's one of the mysteries and watch repair other than engineers like to keep their job and apparently they keep their job if they keep designing innovative new things. So the mystery is why are there so many variations of watches. Although typically spare parts servicing and repair was not on the mind of the manufacturer at the time they were manufacturing which unfortunately contributes to the problem. Link to comment Share on other sites More sharing options...
dadistic Posted December 19, 2021 Share Posted December 19, 2021 I have the Bulova ABC book, and checking the 11ANACD part #574, the base model shows as 11ANACD, so it is unique to this movement and there is no substitute. Sorry, I guess you need to find a scrap movement. Link to comment Share on other sites More sharing options...
GuyMontag Posted December 19, 2021 Share Posted December 19, 2021 (edited) This ebay seller lists parts for an 11ANAC and also lists a #576 Date Indicator. However, the 11ANAC didn't have a Date Indicator so it is likely from the 11ANACB or 11ANACD. Perhaps message the seller and see if he can provide more info. EDIT: The seller has the dial from the movement listed as well, and I have the same watch. The movement in that watch is an 11ANACB. Also, you might try here. There are some Bulova interchange guides here. Edited December 19, 2021 by GuyMontag 1 Link to comment Share on other sites More sharing options...
Franktimex Posted December 23, 2021 Author Share Posted December 23, 2021 Thank for the lead. However the watch on eBay appears to be a 11 anacb and is not compatible with a 11 Anacd. Link to comment Share on other sites More sharing options...
Franktimex Posted December 23, 2021 Author Share Posted December 23, 2021 You know what I think I’ll try it out. It does look identical and going back it does state that it could be additional or different. So for $8 why not? Link to comment Share on other sites More sharing options...
Franktimex Posted December 23, 2021 Author Share Posted December 23, 2021 I will keep you apprised Link to comment Share on other sites More sharing options...
Franktimex Posted January 9, 2022 Author Share Posted January 9, 2022 Thanks Guy Montag. It worked 1 Link to comment Share on other sites More sharing options...
Franktimex Posted January 9, 2022 Author Share Posted January 9, 2022 Revision: On part number 574 for the Anacd there is no day changing finger. But on The 11 anacb there is. However, because of that extra finger it was causing the date to change twice. Once at 12 and again at 10:30 am as there is no dial spacer on the ANACD this was causing the extra changing of the date. So using a .5 mm flathead I broke off the small tab that changes the day. This seems to have fixed the problem. So can you use a 574 anacb on a 574 anacd yes you can if you break off the day changing tab. thanks for all your help. 1 Link to comment Share on other sites More sharing options...
GuyMontag Posted January 10, 2022 Share Posted January 10, 2022 That's good stuff, I'm glad you were able to MacGyver that to work (and I'll file that info away myself). What is the watch you are working on, would love to see pics if you have any. Link to comment Share on other sites More sharing options...
Franktimex Posted January 14, 2022 Author Share Posted January 14, 2022 DONE 1 Link to comment Share on other sites More sharing options...
Recommended Posts