Jump to content

French clock update

clockboy

By clockboy
in All Things Clocks

 Share

Recommended Posts

clockboy Distinguished Member

clockboy

Posted
Posted

I have spent many, many hours in my workshop restoring this clock after it arrived totally wrecked (see pic). There are still issues that need resolving. 1. the minute hand Is not correct and is just a modified hand that came with the clock and as yet I have still not found a replacement that fits. 2. The chiming sequence goes out of sequence now and again. The issue might be when in the strike mode it runs very, very fast so it might be skipping the count wheel, maybe !!!.. or The fly wheel bushings might need replacing!!!

However lessons learnt. When sticking alabaster together use epoxy glue BUT mix it with some alabaster powder. This hides the joins (almost) When replacing the pendulum the numbers found on the rear of the case are really useful. This particular clock has 4.8 and using the PDF (see attachment) it gave me the length required and also the BPM expected. Using the Clock master app on my iPhone it was almost spot on with regard to timekeeping. If careful spelter can be drilled and have a thread tapped into it. When gold leafing use fresh  size and after applying leave for at least 15 mins before attaching the leaf. To get a smooth finish I found my finger gave the best results.

 

BEFORE

IMG_5783.thumb.jpg.1f523acb54f61385b9716246e6728d0d.jpg

AFTER

IMG_6123.thumb.jpg.dbd444bee2b400d0cf309476e6e2e79d.jpg

FrenchClockBeatRates2.pdf.pdf.pdf

  • Like 3
Link to comment
Share on other sites
KarlvonKoln Distinguished Member

KarlvonKoln

Posted
Posted

Dude!  That's amazing!  I remember that original post where you showed the pictures of it arriving in pieces.  Your description of the restoration sounds both arduous and educational.  But the clock certainly has come a long way.  From the pics here, it looks like it was worth all the work.

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
  • Author
Posted

To hold the case furniture I used a small amount of epoxy putty.  To complete the joins I used epoxy resin. I then rubbed all of the case down with 2500 grit and a little water. I then polished with clear wax. 
 

ps the chiming issue is (I think)I removed the count wheel without marking its position so I will  have to remove and try in another position. However my wife loves the clock and doesn’t want me to remove it ☺️

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted
26 minutes ago, clockboy said:

To hold the case furniture I used a small amount of epoxy putty.  To complete the joins I used epoxy resin. I then rubbed all of the case down with 2500 grit and a little water. I then polished with clear wax. 
 

ps the chiming issue is (I think)I removed the count wheel without marking its position so I will  have to remove and try in another position. However my wife loves the clock and doesn’t want me to remove it ☺️

If you look carefully the square the count wheel fixes onto some have a mark on it for a guide for fitting it correctly.

  • Like 2
Link to comment
Share on other sites
  • 2 weeks later...
Lenj WRT Addict

Lenj

Posted
Posted
On 12/2/2020 at 11:39 AM, clockboy said:

I have spent many, many hours in my workshop restoring this clock after it arrived totally wrecked (see pic). There are still issues that need resolving. 1. the minute hand Is not correct and is just a modified hand that came with the clock and as yet I have still not found a replacement that fits. 2. The chiming sequence goes out of sequence now and again. The issue might be when in the strike mode it runs very, very fast so it might be skipping the count wheel, maybe !!!.. or The fly wheel bushings might need replacing!!!

However lessons learnt. When sticking alabaster together use epoxy glue BUT mix it with some alabaster powder. This hides the joins (almost) When replacing the pendulum the numbers found on the rear of the case are really useful. This particular clock has 4.8 and using the PDF (see attachment) it gave me the length required and also the BPM expected. Using the Clock master app on my iPhone it was almost spot on with regard to timekeeping. If careful spelter can be drilled and have a thread tapped into it. When gold leafing use fresh  size and after applying leave for at least 15 mins before attaching the leaf. To get a smooth finish I found my finger gave the best results.

 

BEFORE

IMG_5783.thumb.jpg.1f523acb54f61385b9716246e6728d0d.jpg

AFTER

IMG_6123.thumb.jpg.dbd444bee2b400d0cf309476e6e2e79d.jpg

FrenchClockBeatRates2.pdf.pdf.pdf 188.71 kB · 2 downloads

What a super job, well done!!!

Link to comment
Share on other sites
Orologi67 Watch Enthusiast

Orologi67

Posted
Posted

Its a countwheel issue.  They are bastards, especially if a previous meddler has "manipulated" it.

You did an incredible job rebuilding the case!  Alabaster? Marble?

I was in vienna at a very fine clock shop where i bought a marble french portico clock.  It arrived at my house in the USA as pile of dust.  I was so upset!

Years ago i bought a late 1700's early 1800s alabaster clock that was in pieces in several boxes and glued it all back together.  I enjoyed that.

Cheers!

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
  • Author
Posted

Yes it is annoying but that’s all part of the fun. The issue I have is my wife loves the clock and does not want me to remove it. Quote “I don’t count the chimes I just know it’s either half past or the hour”.

I will tackle the issue after the festive time. My only fear is that the count wheel is not the original one which will be a challenge.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Chief
      Without Our Forum

      By Chief · Posted

      Sorry to jump in here guys, but I've read through this whole thread and it seems there are a lot of people who think joining Facebook means everyone will have access to their lives. You could make a Facebook account with a fake name. You could even use your real name if you wanted to and set it to completely private so people can't even find you in a search and you don't have to add anyone as a 'friend', so you won't see anyone's posts. Literally use it to join a group full of members of this site. Admins could even set the group to private and require a password of some sort to gain acceptance into the group, so you can be sure that it's only members of this site that get in. @tomh207 is right, the form with email addresses and names is a bad idea. That will be abused by scrapers. Facebook is only as personal as you let it be. You can be completely anonymous on there if you wish. Don't think of it as Facebook. Just think of it as a watch repair group as that's all you'd use the account for. It doesn't even have to be set up with your current email address. Make a random one on Gmail or any other free provider just for the Facebook account. Tagged you by accident and now it won't let me remove it 😂 @Neverenoughwatches
    • RichardHarris123
      Ron

      By RichardHarris123 · Posted

      Hello and welcome from Leeds, England. Plenty of clock people on here to help you out. 
    • cron
      Ron

      By cron · Posted

      Hi I'm a new member.  I recently pulled a Wakmann 8 hour clock out of one of my small airplanes.  My hope is to get it working again.
    • watchAdventures
      Dangerous substances when disassembling timex indigloo?

      By watchAdventures · Posted

      I have a timex urban command (digital watch with indiglo). Are you aware of any dangerous substance or material that I can come in contact with if I disassemble the watch? For example I read that the indigloo is made of luminescent “indium tin oxide” (as reported here https://www.chemeurope.com/en/encyclopedia/Phosphor.html) and that this material can cause irritation to the respiratory tract If inhaled (https://en.wikipedia.org/wiki/Indium_tin_oxide). Any other stuff I should be aware of? Thanks in advance for your answers.
    • nevenbekriev
      TIMEKEEPING PROBLEM: Impact of changing the platform escape wheel on a carriage clock

      By nevenbekriev · Posted

      John, I believe that @zygo has checked the beat rate with timegrapher and has adjusted to exactly 18000, but still the clock goes faster. @zygo, please count the teeth of the wheels and pinions in the train. But the most pobable answer here is: 18000 X 24 / 25 = 17280, which is another well used in various movements beat rate. May be somebody replaced the hairspring and vibrated it for 18000 and wasn't clever enough to count the teeth...
×
×
  • Create New...