Jump to content

French clock update

clockboy

By clockboy
in All Things Clocks

 Share

Recommended Posts

clockboy Distinguished Member

clockboy

Posted
Posted

I have spent many, many hours in my workshop restoring this clock after it arrived totally wrecked (see pic). There are still issues that need resolving. 1. the minute hand Is not correct and is just a modified hand that came with the clock and as yet I have still not found a replacement that fits. 2. The chiming sequence goes out of sequence now and again. The issue might be when in the strike mode it runs very, very fast so it might be skipping the count wheel, maybe !!!.. or The fly wheel bushings might need replacing!!!

However lessons learnt. When sticking alabaster together use epoxy glue BUT mix it with some alabaster powder. This hides the joins (almost) When replacing the pendulum the numbers found on the rear of the case are really useful. This particular clock has 4.8 and using the PDF (see attachment) it gave me the length required and also the BPM expected. Using the Clock master app on my iPhone it was almost spot on with regard to timekeeping. If careful spelter can be drilled and have a thread tapped into it. When gold leafing use fresh  size and after applying leave for at least 15 mins before attaching the leaf. To get a smooth finish I found my finger gave the best results.

 

BEFORE

IMG_5783.thumb.jpg.1f523acb54f61385b9716246e6728d0d.jpg

AFTER

IMG_6123.thumb.jpg.dbd444bee2b400d0cf309476e6e2e79d.jpg

FrenchClockBeatRates2.pdf.pdf.pdf

  • Like 3
KarlvonKoln Distinguished Member

KarlvonKoln

Posted
Posted

Dude!  That's amazing!  I remember that original post where you showed the pictures of it arriving in pieces.  Your description of the restoration sounds both arduous and educational.  But the clock certainly has come a long way.  From the pics here, it looks like it was worth all the work.

clockboy Distinguished Member

clockboy

Posted
  • Author
Posted

To hold the case furniture I used a small amount of epoxy putty.  To complete the joins I used epoxy resin. I then rubbed all of the case down with 2500 grit and a little water. I then polished with clear wax. 
 

ps the chiming issue is (I think)I removed the count wheel without marking its position so I will  have to remove and try in another position. However my wife loves the clock and doesn’t want me to remove it ☺️

oldhippy Distinguished Member

oldhippy

Posted
Posted
26 minutes ago, clockboy said:

To hold the case furniture I used a small amount of epoxy putty.  To complete the joins I used epoxy resin. I then rubbed all of the case down with 2500 grit and a little water. I then polished with clear wax. 
 

ps the chiming issue is (I think)I removed the count wheel without marking its position so I will  have to remove and try in another position. However my wife loves the clock and doesn’t want me to remove it ☺️

If you look carefully the square the count wheel fixes onto some have a mark on it for a guide for fitting it correctly.

  • Like 2
  • 2 weeks later...
Lenj WRT Addict

Lenj

Posted
Posted
On 12/2/2020 at 11:39 AM, clockboy said:

I have spent many, many hours in my workshop restoring this clock after it arrived totally wrecked (see pic). There are still issues that need resolving. 1. the minute hand Is not correct and is just a modified hand that came with the clock and as yet I have still not found a replacement that fits. 2. The chiming sequence goes out of sequence now and again. The issue might be when in the strike mode it runs very, very fast so it might be skipping the count wheel, maybe !!!.. or The fly wheel bushings might need replacing!!!

However lessons learnt. When sticking alabaster together use epoxy glue BUT mix it with some alabaster powder. This hides the joins (almost) When replacing the pendulum the numbers found on the rear of the case are really useful. This particular clock has 4.8 and using the PDF (see attachment) it gave me the length required and also the BPM expected. Using the Clock master app on my iPhone it was almost spot on with regard to timekeeping. If careful spelter can be drilled and have a thread tapped into it. When gold leafing use fresh  size and after applying leave for at least 15 mins before attaching the leaf. To get a smooth finish I found my finger gave the best results.

 

BEFORE

IMG_5783.thumb.jpg.1f523acb54f61385b9716246e6728d0d.jpg

AFTER

IMG_6123.thumb.jpg.dbd444bee2b400d0cf309476e6e2e79d.jpg

FrenchClockBeatRates2.pdf.pdf.pdf 188.71 kB · 2 downloads

What a super job, well done!!!

Orologi67 Watch Enthusiast

Orologi67

Posted
Posted

Its a countwheel issue.  They are bastards, especially if a previous meddler has "manipulated" it.

You did an incredible job rebuilding the case!  Alabaster? Marble?

I was in vienna at a very fine clock shop where i bought a marble french portico clock.  It arrived at my house in the USA as pile of dust.  I was so upset!

Years ago i bought a late 1700's early 1800s alabaster clock that was in pieces in several boxes and glued it all back together.  I enjoyed that.

Cheers!

clockboy Distinguished Member

clockboy

Posted
  • Author
Posted

Yes it is annoying but that’s all part of the fun. The issue I have is my wife loves the clock and does not want me to remove it. Quote “I don’t count the chimes I just know it’s either half past or the hour”.

I will tackle the issue after the festive time. My only fear is that the count wheel is not the original one which will be a challenge.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • MikeEll
      Broken anchor pallet

      By MikeEll · Posted

      Another option is to an old piece of clock mainspring, if you have some thick enough.
    • MikeEll
      1950s Seiko Marvel Balance Staff

      By MikeEll · Posted

      Thanks guys.  The replacement balance was way too big to fit the watch movement, my point being that it’s definitely not the correct part for this movement.  The spring was similar dimensions, but clearly not close enough to avoid other adjustements.  Yes, I’m aware that springs are usually sold with the balance wheel complete, but its very often possible in my experience to be able to swap out a spring from one balance wheel to another of the same type.  I tried it anyway as it was there in front of me and easy to do. No harm in trying. In the end I’ve repaired the cracked collet and refitted the original balance complete, it’s back in business.  Just a shame I couldn’t identify and buy the correct new part, but this model seems to be fairly lacking in parts data.
    • mikepilk
      Off-centered hairspring

      By mikepilk · Posted

      Good job. 👍 To my eyes, the centre of the coil is about where the red dot is. So a tweak at either of the arrows (as per the Chicago School) should centre it. It's not far off, and if you already have it installed , I'd run it and see how it performs.
    • darkhelmetlive
      ETA 988.333 burns through battery in 2 weeks

      By darkhelmetlive · Posted

      I was curious about that, and last time I changed the battery I checked and both insulators are definitely there. The little arm that extends up away from the movement to touch the speaker seemed maybe slightly misaligned. I wondered if it was touching something it shouldn’t be, hence my parchment paper experiment. I also considered maybe just removing it as I believe it’s a single screw. Another thought is I have a service manual PDF for it and it has some testing instructions with voltage and other numbers, I might try some of those to see if something is obviously wrong. I see weasol probably posted the same PDF. All that being said, it might just need a service, as several of you have said, which I’d probably try to find a professional for. I’m don’t know that I feel like taking this thing apart too much.
    • EtherJunky
      Found some Soviet watch repair guides.

      By EtherJunky · Posted

      So I've been lurking on the internet again and found a rabbit hole to explore. I was able to download 5 pdf's about Soviet watch repair. They're all in Russian and are scanned images, so unlikely to be useful to anyone that doesn't speak the language or is able to use some form of artificial intelligence to translate it. I just thought it might be of interest to some of you.   А.П.Харитончук Устройство и ремонт часов.pdf Д.Д.Карл - Сложные часы и их ремонт.pdf Дональд Де Карль - Руководство ро ремонту часов.pdf Ремонт часов, 1968 - Пинсон.pdf Харинтончук А.П. Устройство и ремонт часов.pdf 6 pdf's*   [A._P._Haritonchuk]_Spravochnaya_kniga_po_remontu_(libcats.org).pdf
×
×
  • Create New...