Jump to content

Do I need to re-oil if I reassemble several times?

Lc130

By Lc130
in Watch Repairs Help & Advice

 Share

Recommended Posts

Poljot Super WRT Addict

Poljot

Posted
Posted

Train jewels and all pivots must be perfectly clean before any lubrication is applied. Also, oil should stay in certain place, filling the gap between the pivot and the jewel. So i would say that you need to clean, dry and oil every jewel on the bridge again. It takes only a minute to clean them as you do not need "full car wash" - just a quick dip, brash and dry it quickly.

Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted
On 11/26/2020 at 2:03 PM, Lc130 said:

I'm a beginner and had trouble with a 11DP.  I had to take it apart again a few times.

think about this as a learning opportunity a opportunity to get better at doing things like lubrication. Once the watch is all perfect clean it again and practice lubrication again. The more times you practice this the better you'll get.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • pc1093
      raketa watch Movement Removal

      By pc1093 · Posted

      I have removed the stem and open the case. The Movement can't drop out but it can be rotate Anyone has idea THANK YOU
    • deni2s
      Roland Ranfft RIP

      By deni2s · Posted

      Not a family member, and yes, it no way near as good, as some information got lost from original site and some information got incorrectly copied. The original site is available as iOS app here: https://apps.apple.com/fi/app/ranfft-watch-movements-archive/id6502008939
    • Hawaiikook808
      Seitz Tool - Help determine if Seitz or not

      By Hawaiikook808 · Posted

      Outstanding, Marc! Your information is really helpful and clears this up, especially given that yours were purchased as sets. Thanks, man. So, it appears I jumped the gun on this one, but I am relieved. I will say, though, that all of my reamers and concave pushers are number-stamped and appear to be of better quality.  Also, the bayonets on my pushers are actually the same color as the steel.  The next thing to do is restore the heads of these pushers with some polishing paper.  Alex at the Watch Repair channel has a nice little video on this.   I appreciate your help! Frank      
    • Marc
      RANFFT Database is down!!

      By Marc · Posted

      Just installed it on my iPhone (my only iOS device) and it appears to be intact and functional. I may have to go out and buy myself an ipad just for this app.
    • Marc
      Seitz Tool - Help determine if Seitz or not

      By Marc · Posted

      I have two Seitz sets, one ancient (with the 3mm anvils) and one just old (with 4mm anvils) plus a collection of spare pushers of assorted vintage. Not one of them is marked with it's size. Something which I have found very irritating when I have been using the tool and not returning pushers to their correct place in the tray every time as it means that I have to get the calipers out and measure them. These were bought as sets and collectively I have over 100 pushers so it would seem highly unlikely (if not inconceivable) that they are all cheap knock offs, especially as they are old enough to pre-date the prevalence of the Chinese knock off industry (at least as applied to watch making tools). I therefore believe them to be original Seitz parts. And there is no numbering. The shape of the bottom of the pump pushers is the same as your photo. The only thing that may not be the same is that the slotted insert (looks like a screw but is in fact a bayonet) should be brass. Yours looks the same colour as the steel but that could just be the lighting.
×
×
  • Create New...