Jump to content

Original 2824 or 2824-1 assembly


Recommended Posts

The base is the same in variants of the caliber, I take pictures as you turn down specially of the date mech that you are not familiar with, this will not only help during assembly it also is a gallary to refer to and show how things were, where you might come face an issue,  if a datasheet exist,  it will be found.

Tell as much as you know of the history, issues etc.

Good luck.

Link to comment
Share on other sites

3 minutes ago, Nucejoe said:

The base is the same in variants of the caliber, I take pictures as you turn down specially of the date mech that you are not familiar with, this will not only help during assembly it also is a gallary to refer to and show how things were, where you might come face an issue,  if a datasheet exist,  it will be found.

Tell as much as you know of the history, issues etc.

Good luck.

Unfortunately, like an idiot I didn't document during disassembly and it was too late by the time I realised it was an earlier variant. 

I've circled the area I'm having trouble with, it's where the calendar click would usually go on a 2824-2.

IMG_20201117_184108__01.jpg

Link to comment
Share on other sites

No problem, just good to make a habbit of.

Now internet acting up so can't give you this link dierctly,but.

Go to search function, search 

ETA Cal 2824-2 (17 jewels) disassembly/ assembly by vWatchie dated jun 10,2119.

Excellent walkthrough.

Good luck.

Link to comment
Share on other sites

6 minutes ago, Nucejoe said:

No problem, just good to make a habbit of.

Now internet acting up so can't give you this link dierctly,but.

Go to search function, search 

ETA Cal 2824-2 (17 jewels) disassembly/ assembly by vWatchie dated jun 10,2119.

Excellent walkthrough.

Good luck.

Thank you for that, just found that thread and looked through his disassembly photos, unfortunately it's a slightly different date change mechanism on the movement I'm working on, can't seem to find any pics online at all!

Link to comment
Share on other sites

7 minutes ago, Nucejoe said:

No problem, just good to make a habbit of.

Now internet acting up so can't give you this link dierctly,but.

Go to search function, search 

ETA Cal 2824-2 (17 jewels) disassembly/ assembly by vWatchie dated jun 10,2119.

Excellent walkthrough.

Good luck.

oops 2019 not 2119. 

Link to comment
Share on other sites

2 minutes ago, Ageorge1988 said:

Thank you for that, just found that thread and looked through his disassembly photos, unfortunately it's a slightly different date change mechanism on the movement I'm working on, can't seem to find any pics online at all!

Ok, show and number peices of date change train, you will be shown where each pieces goes. 

Link to comment
Share on other sites

4 minutes ago, Ageorge1988 said:

These original 2824 docs say it's part number 2556 for the date wheel, is that in place of 2555?

I can't work out how the jumper spring (part #2575) fits.

ZjYbi1.png

ZjYGwK.png

2575 fits behind 2576 to push it into date disk "detent". 

A picture worth a thousand words, isn't it.

Link to comment
Share on other sites

10 hours ago, Nucejoe said:

2575 fits behind 2576 to push it into date disk "detent". 

A picture worth a thousand words, isn't it.

I've got 2576 in the right place I think, I tried to fit 2575 where I've drawn in blue pen, it was tight but went in and then snapped so I've either put it in the wrong place, been too heavy handed or the part was worn as it's from a circa 1970's rotary.

I've ordered a replacement part from ebay.

IMG_20201118_064230__01.jpg

Link to comment
Share on other sites

On 11/18/2020 at 7:36 AM, Ageorge1988 said:

I've got 2576 in the right place I think, I tried to fit 2575 where I've drawn in blue pen, it was tight but went in and then snapped so I've either put it in the wrong place, been too heavy handed or the part was worn as it's from a circa 1970's rotary.

I've ordered a replacement part from ebay.

IMG_20201118_064230__01.jpg

I've now got a replacement spring (2575) if anybody knows how to install it?

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • H Watch Repairers—is there is a ‘standard format’ for the service marks or codes lightly engraved inside cases of pocket watches or wristwatches?   Sometimes I can see there might be a reference to year/ month but other times am confused. I’ve included an image of the rear of a 1951 Hamilton 992B Railroad pocket watch as an example. Thank you for all information you can give, Mike
    • Hi to Blackminou29–am a collector/ caretaker—good luck to you following your repair course—with hindsight I wish I’d pursued a career in both watchmaker/ jeweler fields—good luck with whatever career passion you engage.   Thank you Watchweasol for posting the amazing TZIllustratedGlossary! Best wishes, Mike
    • yes I noticed the new site and I miss the old site. It's the unfortunate problem of the Internet here today gone tomorrow sometimes some of the stuff gets backed up and sometimes well it does not then the problem with the early Seiko's were there were not necessarily designed for distribution across the planet and as such there is no customer support for them. So trying to find early stuff like technical information or sometimes even parts list for older Seiko is is problematic. But I did find you a you tube video. A quick look he seems to take a heck of a lot of time to actually get to the service single I did not watch all that but it does look like he did disassemble or started to say there's a tiny bit here  
    • RichardHarris123: Hello and welcome from Leeds, England.  I have family all over Australia, went as £10 poms Thanks Richard. Hope you’re able to visit your family here and that they’ve all done well 🙂 My relatives arrived from England in the 1790s transported on the ‘Second & Third Fleets’—a story of timber sailing ships, of convicts and doing well in this huge Country of Australia. When I visited the UK in the 1980s, I was too young to comprehend the depth and breadth of its history…  Best wishes, Mike William Chapman, my 4th great Grandad’s charges, at age 23 read at the Old Bailey; sentenced to 7 years of transportation to Sydney.
    • The whole process and the progress are closely observed, it's hand-driven and very controlled. I can't see the "danger", unless you are watching the TV while doing it. As you could have read, and in this quote "wheel" is the balance-wheel.
×
×
  • Create New...