Jump to content

Good U.S. source for Miyota 8215 dial feet screws

LeeReynolds

By LeeReynolds
in Watch Repairs Help & Advice

 Share

Recommended Posts

LeeReynolds Member

LeeReynolds

Posted
Posted

The Miyota part number i'm looking for is:

SCREW FOR DIAL (×2) : 929-610

I've submitted a parts-watch-inquiry form on esslinger.com, but i don't expect to hear back from them till Monday at the soonest.

Other than Esslinger's, are there other vendors people would recommend here in the US?

Link to comment
Share on other sites
yankeedog Distinguished Member

yankeedog

Posted
Posted
8 hours ago, jdm said:

There is no secret source for parts, we all just search oine.

How the screw looks like? Please post a plcture. 

X2 on this one.Any miyota  movement  of the 8200 variety  would  be a good  donor in this regard.or if you have another  Japanese  movement  laying around doing nothing  you might be able to cannibalize  parts from it.

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
On 9/20/2020 at 11:31 PM, LeeReynolds said:

I do not have a picture of the screw, but I do have an example from Miyota's documentation.

SCREW FOR DIAL (×2) : 929-610

The need for pictures or at least size and description is to get an idea about what to replace a part with. Numbers don't help much when the part is generally unavailable.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Murks
      2813

      By Murks · Posted

      Yea a have given it a full service this movement is chinese 2813 whats the left angle for this movement does anyone knows  and how to do a remove the default 52 degrees on my timegrapher?
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      Sure! Some very accomplished repairers never use epilame! I have often wondered if it is worth the trouble. Not using epilame will shorten the service intervals though, but that could be better perhaps both for the owner and the repairer!? Speaking of oiling, I just read this: After WWII in the 1950s the first Synthetic Oils came on the market. Most watchmakers did not rush to use these oils since they were bad for business now that the watch serviced with Synthetic oil would not come back to him for service for another 5-7 years he would lose a lot of income. ~Ofrei.com   Anyway, I wouldn't be surprised if it would be more correct to think of epilame as a binder rather than a repellant. Until convinced otherwise that's how I will think of epilame.
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      I read that same article last night  H.  I think epilame is too much headache for me, sources aren't always accurate, some conflicting. Such is the GRAVITY of this situation, Is it ok if i just STICK  to a thixotropic oil 🤣
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      Not sure I follow along. As I stated in one of my previous posts, the epilame will remain intact between rubbing parts as long as the surface is lubricated by oil or grease. Maybe it's just a coincidence, but note how the epilame-treated surface is illustrated in @Waggy's post. It looks like the oil is exposed to a binder (epilame!) so that it can't move sideways.
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      The epilame under the oil will also be removed  Unless the oil makes a barrier between the epilame and the escape teeth 😅 I think i need two strong coffees now 🤣
×
×
  • Create New...