Jump to content

Funny watch repair stories:


Recommended Posts

I'll start.  But first, the backstory: what I didn't know beforehand was that one of my daughters "borrowed" my *brass* tweezers to apply some stickers, and put them back before I knew about it. I found that out later.

So there I am, bit of sinus trouble making me groggy, working on a practice movement to take my mind off it.  I'm unscrewing the balance bridge, and I go to grab the screw with the tweezers and put it in my tray. I hold it over the tray and let go, but it stays on the tweezer tip.  I think "That's not good".  So I put the screw and the tweezers on my demagnetizer and hit the switch. I lift the screw and drop it in the tray. And as I watch myself lifting *brass* tweezers off a demagnetizer, I realize how tired I am and go to bed (resolving to figure out why the screw stuck sometime later).

Anyone else have a funny watch repair-related story to tell?

Edited by KarlvonKoln
Edited for misspelling
  • Haha 1
Link to comment
Share on other sites

2 hours ago, KarlvonKoln said:

And as I watch myself lifting *brass* tweezers off a demagnetizer, I realize how tired I am and go to bed (resolving to figure out why the screw stuck sometime later).

Science is demonstrated by experiments, so nothing is wrong repeating these sometime. The other day I found that my brass tweezers reject small screws, even after being demagnetized (the tweezers). I only went far enough to learn that brass is not actually totally amagnetic, did not try to demag the screws and just moved on.

  • Like 1
Link to comment
Share on other sites

I haven't posted in a bit so:

The LCD wristwatch was a new thing.  When was that?  '79, '80, not really certain.  I purchased my first one, a Seiko in '81.  Lifetime ago...  I was pulling night watch on the fall back from daylight saving time to standard.  Remember the rules said to set it back at 0200.

It was 0300 when I heard a shout from the desk sergeant who proclaimed his watch had died.  I look at it and saw the 00:00 on the display.  It seems he did not know how to set the watch so at 0200 took the back off and removed the cell for an hour then put it back in thinking the timepiece would stop for an hour and then display the correct time.

Armitron as I recall.  I bailed him out, of course.

  • Like 1
  • Haha 2
Link to comment
Share on other sites

  • 4 weeks later...

It's not a story of repairing, and its not a watch but a clock! Tried to escape from me, but I caught it, to make my life more difficult it tried to disappear in pieces. We had heavy wind today and my clock was placed on the window sill, seems it teamed up with the curtain and with a little help it went trough the window. I managed to collect every piece with the help of a ladder and even though the case suffered a bit it is still going. ? ?

  • Sad 1
Link to comment
Share on other sites

  • 2 months later...

Thanks again, my daughters.  So apparently one of my daughters has a little prism-like kaleidoscope toy, which gives one "insect vision", and also looks a heck of a lot like my black loupe.  So guess where she leaves it laying about, just for giggles.
If you guessed "On my workbench", you win the prize.  Sat down to look into works of another daughter's little quartz watch, took off the back, grabbed the loupe, and saw about TWENTY BATTERIES back there!!!  Recoiled a little, and looked at the "loupe" and had to laugh.  Yep, she got me good.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • No John, we don't want Mark to change anything, we are just scared of losing a brilliant forum and losing contact with each other.  As pointed out, this forum is full of knowledge and I for one,  consider the regulars friends. I would hate to lose contact with you and the others.   PS, this forum is really important to me. 
    • one little minor problem with your chemistry experiment here which is what exactly is epilam? In other words is it an exact substance with the chemical you specify or is it a term? For instance originally it was steric acid either dissolved in some sort of solvent or it was applied by vaporizing it. Then now it's all kinds of different things the watch companies all have different ideas there's a whole bunch of patents. So is not always an exact substance.   let me snip out a image from the patent that I attached up above. Notice I highlighted something it seems to disagree with your evaluation.  
    • I guess You had to try, as it would be hard to sleep without that try, but, I know the result before the experiment... As I told before, the friction will be so big that the wheel will not turn. The pivots have to be thin and polished - the bigger the number of the wheel (2th, 3gh, 4th...), the thinner the pivot. What You are trying to do is possible, but forming the new thin pivot must be done on lathe. Thus the wheel will get shorter, but can have new pivot without the drilling for normal standard repivoting. Then piece of brass can be soldered under the pivot hole in the bridge and new hole drilled in it to form the new bearing.  Well, this way is not the recommended one, not quite correct, but it is possible to do for the excersize... When I say lathe, lathe may be verry simple, someting like turns, but made of what one has in reach of his hands. If You want to try, I will try to guide
    • yes by all means let's gather up our weapons tar feathers find the nearest tree in case Mark is not agreeable to our terms on our demands and storm his Castle. I don't quite understand what you're trying to do here? In other words you want Mark to somehow guarantee that the group will live on forever no matter what? You want Mark to somehow change his business model of what is trying to do or should we just take the group away from him? oh and is quite possible that Mark never realized that his discussion group would take on a life of its own. That the members of the group would like to continue on forever.  
    • I'm not sentimental, I see it this way.  I inherit something I  don't like, I could sell it, buy something I do like and remember the person with the new item.  For example, I  inherit a watch ( I haven't), I don't like it, I  buy a watch I do like, every time I look at the watch, I think of the person. 
×
×
  • Create New...