Jump to content

Hello fromRaleigh, NC

Negot8or

By Negot8or
in Introduce Yourself Here

 Share

Recommended Posts

Negot8or Member

Negot8or

Posted
Posted

Hi. I’m Jeff. I’ve been interested in watches my entire life and finally got the courage to get the tools and try to learn this set of skills.

I don’t have a specific model or make that I like most... I just find the mechanics interesting and beautiful and I’m amazed by the people who can design/build them from scratch.

My goal is really just to be able to do basic/simple repairs. Tear down, clean, rebuild (replace a part of needed).  And since I’m just starting, I’m trying now to figure out the best way to film teardowns so I know how to reassemble (yep, already made this mistake and am struggling to get one back together now). 

Nucejoe Distinguished Member

Nucejoe

Posted
Posted

Welcome to the forum.

There are techsheet available on some calibers, you may also find helpful walkthroughs on this forum.

Taking pix is always a good idea.

  • Like 1
watchweasol Distinguished Member

watchweasol

Posted
Posted

Hello and welcome to the forum,  If you post the caliber and make of the watch and some pictures them the members will be able to identify the watch and give help should it be required        cheers

  • Like 1
  • 6 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Michael20
      French drum novice

      By Michael20 · Posted

      Regarding the spring winders, I made my own and used copper pipe reducers as the tubes to retain the spring. You will need to cut out a section for the end of the spring to protrude but if you watch one of the many videos on this subject that will make sense. You can find a selection of sizes on Ebay for very little cost. I'll attach a pic showing one of mine.  Good luck!
    • JohnR725
      Omega sweep second pinion friction spring - correct tension IS important

      By JohnR725 · Posted

      There were things bothering me about this discussion that took me a while to figure out the problem. In the image below it appears to be the spring may be pushing up? Normally when Omega has a spring pushing up the pinion has a pivot with a bridge to hold it in place so in other words the spring can push on something that stationary as opposed to this which appears to be floating? To understand the problem with the above image we need another image of side view which I have below. In my image down below on the left-hand side it agrees with the image up above. But the only problem is the left-hand side is defective and the right-hand side image is the way it's supposed to look. Then Omega if you can access the right documents does explain how and why this problem occurs. With the pinion floating around it might be assumed that you support it when putting on all the hands but you do not because as noted below if you do this small bush on the pinion will relocate out of position exactly what we see in the image up above.   Then Omega does not mention this but there is a possibility of also damaging the pinion and causing the bush to move to where it's not supposed to be when removing the hands.   
    • LittleWatchShop
      Regulating is too touchy

      By LittleWatchShop · Posted

      Maybe show us 1) the watch, 2) timegrapher readings in DU, DD, PU, and PD.
    • Louis1969
      Regulating is too touchy

      By Louis1969 · Posted

      The timegrapher displays significant beat error variations in the dial-up position. When the watch is lying flat (face up), the beat error is much higher than in other positions. Beat error readings are inconsistent, with especially large gaps in the face-up position.  Please help !  
    • Geotex
      Informational universe.

      By Geotex · Posted

      Looks like an open-access journal that runs as a glorified pre-print server with no true peer review, so it’s not easy to judge the veracity of the conclusions.
×
×
  • Create New...