Jump to content

Pre-Cleaning A Watch

fuse63

By fuse63
in Watch Repairs Help & Advice

 Share

Recommended Posts

fuse63 Watch Enthusiast

fuse63

Posted
Posted

Hello Everyone,

Can anyone tell me exactly what goes into pre-cleaning a watch? I took a webinar with AWCI and they talked about precleaning the watch before checking the escapement. I usually just clean a watch so I would just want someone to explain to me what goes into it.

 

Thanks

Link to comment
Share on other sites
watchweasol Distinguished Member

watchweasol

Posted
Posted

Hi not a function I have come across, If you are going to clean it just do that,  One normaly checks the watch out before doing anything anyway,  why pre clean somthing you are goung to service unless its in a bit of  a state (gummed up or dirty)

Link to comment
Share on other sites
fuse63 Watch Enthusiast

fuse63

Posted
  • Author
Posted

watchweasol, I couldn't agree with you more, but when i took this class on escapement they said the best way to be able to check the escapement is for a pre-cleaning and then to do your checks thats why i ask. I am assuming that this pre-clean is probably to take some rodico to remove any dirt on the escapement, pallet fork etc.

Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted

in modern watch repair shops is where you're going to find pre-cleaning.  the pre-cleaning procedure is to remove the watch from the case remove the dial and calendar parts for the most part. I know someone who does Rolex repair and claims at least one Rolex watch you can leave the calendar parts on because they're not affected but to be safe everything with paint the dial etc. has to come off.

then the entire watch is run through the pre-clean cleaning machine. Yes they usually are separate cleaning machines. It's usually set to a shorter cycle than you normally would run all the pieces through. The reason for doing this is it gives you a nice clean watch allows you to evaluate everything.

then out of curiosity how was your escapement class?

then you want to be careful with your rodico is really amazing for cleaning but it can leave a residue behind that interferes with things.

  • Like 3
  • Thanks 1
Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

I sometimes pre-clean if a watch/clock is particularly dirty. Rodico,peg wood and sometimes cotton buds are my tools. I do this to aid a closer inspection & analysis and also with watches it gives my cleaning solutions a longer life.

Link to comment
Share on other sites
fuse63 Watch Enthusiast

fuse63

Posted
  • Author
Posted

JohnR725, thanks for the information, so basically you are saying after you remove the dial etc, you just put the whole movement in the pre-cleaning machine without disassembling it? The escapement class was through the AWCI and it was very informative. 

Link to comment
Share on other sites
rodabod Distinguished Member

rodabod

Posted
Posted (edited)

"Pre-cleaning" is the term I use for cleaning absolutely filthy watches. They go in a jar of naphtha. Keeps the large volume of dirt separate from my normal cleaning fluids.

Edited by rodabod
Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted
2 hours ago, fuse63 said:

whole movement in the pre-cleaning machine

yes that is pre-cleaning whole movement nothing is disassembled.

10 hours ago, fuse63 said:

The escapement class was through the AWCI and it was very informative. 

I hadn't realized but AWCI has a YouTube channel looks like they have two separate videos on the escapement including one that covers lubrication.

https://www.youtube.com/channel/UCI5yh2536IS62ehsNONDHiA/videos

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • oldhippy
      First pendulum clock tinker

      By oldhippy · Posted

      Here is all the info on the 'Brocot' suspension block and regulating arbor. http://www.ian-partridge.co.uk/brocotsq.htm
    • JohnR725
      Pocket watch escape wh

      By JohnR725 · Posted

      I usually don't read new introductions but when you came to the group did you want to learn watch repair? The reason I ask is your watch seems so suffered some damage under your hands. And now you're ready to move on to a new patient and have you learned? I often relate watch repair like learning to be a doctor lots of practicing. Even though this is a damaged watch have you practice taking it apart and putting it together a whole bunch at times so you feel confident that the next watch you probably won't break anything? Then when watches were invented specifically pallet forks they didn't have epoxy glue which even if they did they wouldn't you used anyway because the pallet stones need to be moved around they need to be adjusted. so the substance of choice for holding pallet stones and roller jewel's in is shellac. It's a really interesting substance were if it's warmed up at melts the palace on can be moved around hopefully the correct position when it cools shellac hardens back up in the pallet stone will be held in place. If you're carefully could probably put your pallet stone back just warm up the fork carefully ideally there's a tool for this and your pallet stone would be fine.
    • swiss2k
      Omega cal. 565 - low amplitude

      By swiss2k · Posted

      Hi @JohnR725, I would say its a happy end, the watch was in a much worser state and turned out quite nice(imho). I just hoped for a higher result after all that work.  I agree with you, as long as it runs and keeps time, Im happy. Thank you for your advices!   
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      The full article on that patent is a really interesting odd read. I wasn't aware that even a specific set of instructions on the use of a product could be patented. Does that mean that if i can prove that walking backwards will reduce shoe wear by up to 30% then i can patent that idea, and sue in court anyone i catch doing it ?
    • Bonefixer
      Pocket watch escape wh

      By Bonefixer · Posted

      The wheels turned fine. I set the escape wheel in the epoxy when it had just ‘skinned’ and wasn’t set, made sure it spun with the 4th wheel, and let it set.    After cleaning I assembled the barrel and wheel train - all fine. Moving the barrel the escape wheel spun freely. I put a bit of 9010 in my epoxy setting.    It went wrong when I put the pallet fork in. It wasn’t seated right (no jewels) and the escape wheel  knocked a pallet jewel out. I have no idea how to reset a pallet jewel - epoxy again? I’m not spending any more time on this one - it’s missing hands and the front half of the case anyway, and I have more watches ready to put on the bench. 
×
×
  • Create New...