Jump to content

Hello from USA and Romania

johnnydeppRO
 Share

Recommended Posts

johnnydeppRO New Member

johnnydeppRO

Posted
Posted

Hello World of Watchrepairtalk,

I'm new to watches and old in the same time from the perspective of a user. I always loved watches since I was 6 years old, I always enjoyed the idea of tracking the time and know where I'm in the day. I loved and like all of them: quartz as my old Montana with multiple melodies, the old Atlantic that my father used to wear, or my first triad Luch , Raketa and Pobeda, Eastern European watches from Soviet Union and so on. I remember breaking a lot of them, I remember the mechanical watches used to be so sensitive, or maybe it was just me the one that didn't took enough care when either I tried to dismantle or wearing them. After my first love with mechanical watches, I started using mainly quartz watches for a long period of TIME. My last seven years during the new revolution with the smartwatches I started wearing a lot of them, probably dozens, when suddenly one fake face dial on my smartwatch flickered something in my memory... Why should I wear a fake watch analog dial when I can have the original...!!?? And now here I'm.. Right now I'm back to the beginning. But this time is here to stay with me until the end. I want to regulate and fix my own watches, I want to know everything I can learn about this wonderful world of mechanical watches and horology. I don't want to be a watchmaker because I think is too late for me, I'm just a watch user that wants to go a step further into this wonderful world of watches. I mean the real watches.

Thank you Mark for your courses and thank you to all watch lovers for sharing your knowledge with us within this forum.

Johnny from the deep,

PS: I apologies for my english but is not my first language.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Might that be the viscous nature of oil resisting gravity H  ,  we have been comparing water and hydrophobic surfaces which are similar in principle but water is much less viscous than oil. I guess what we trying to discover is if epilame also has an adhesive trait as well as being oleophobic. Plus the oil dropet has very little mass for gravity to work on, like watching tiny water beads that can grip onto vertical glass until they are connected together to increase their mass then run down. 
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      But it also makes it seem less susceptible to gravity. If you place a droplet of oil on an epilame-treated surface the droplet of oil will still stay in place even if you then flip the surface from a horizontal to a vertical position. That is, the oil droplet remains anchored, and that's the purpose of epilame. If it was just a matter of creating an oleophobic surface we could probably use other, less expensive, methods!? I don't know @Waggy but my gut feeling tells me you're spot on (pun intended!). I believe the oleophobic property is a side effect of epilame which is designed to keep the oil anchored.
    • Michael1962
      I'm going to be setting up a decent little workshop here at home.

      By Michael1962 · Posted

      Saturday morning 27/4 Sunday evening 28/4 Monday evening 29/4 Floor has a drain in the middle so I am hoping that there is very little fall on it, if any. Room is about 2.5 x 2.5 metres square. Can only use about 1/2 of one wall on the right of the pictures which has a sliding glass door in it. And only about 3/4 of the wall to the left of the pictures as it has the door to the house in it. Progress. 🙂 
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      This makes much more sense now, the oil is withdrawing itself to make as little contact with the epilame as possible. Same principle as wax on a car creates a hyrophobic surface that makes the cohesive properties of water molecules pull together.  The water beads run off only when under the influence of gravity but still remain cohesively beaded up. And as mentioned earlier a pivot would keep the oil in place on a cap jewel.  Epilame on an escapement would be a different scenario, there is nothing to hold the oil in position if gravity tugs at the bead to move, plus the escape teeth pull the oil about Maybe this is why its suggested to run the watch for a short while to remove the epilame to make two oleophobic surfaces either side of the oil, creating a ring of fire 🔥 around it 😅 The oil is repelled by every surface of the epilame even that which it sits upon. So the oil pulls together to make as little contact with it as possible, but the oil cant float above that area, it can only sit there on top of it. Under gravity the oil could potentially run away as an oil bead, unless the epilame has an adhesive property which i dont think it does ? So something else keeps it in position ie a pivot under a cap jewel . But that isn't the case in a pallet jewel situation. 
    • mikepilk
      Balance wheelwheel crooked

      By mikepilk · Posted

      As with every skill it watchmaking, it takes practice. Notice at the top of the document it says, "Practical work - 40 hours".  I can get the balance wheels 'close enough' to flat, but never seem to get them perfect. Same with gear wheels. Guess I need more practice.
×
×
  • Create New...