Jump to content

Ruin my day with an Eterna


Recommended Posts

I decided I would probably let you guys ruin my day.

Here’s the story:

In 1989 I was in a Mayors Jewelry Store and saw an Eterna Skeleton Watch. It was the prettiest watch I had ever seen and had a fancy price tag to match.

$3500.00

 

I wore it a few years but finally put it up and bought a Rolex because the hands were so small they were impossible to see in dim light.

So I put it back in the box and it has stayed there for the last 29 years.

 

I have no desire to sell it and am still very fond of it, although I haven’t worn it in years.

I have also never seen another one like it anywhere.

Not on Ebay, Google Searches, or anywhere else.

And I have looked for years.

I know it is not true but it seems like I have the only one in the world.

At least as far as the internet is concerned.

 

So the question is:

Does it have any value at all or is at least worth what I paid for it?

 

Again I don’t want to sell it.

I am just wondering if it was a big waste of money or if it at least still has some value. It is all 18 carat gold with real Sapphires on the face, at least according to the Documentation.

 

Thanks.

 

 

 

 

 

Eterna Watch-01.jpg

Eterna Watch-02.jpg

Eterna Watch-03.jpg

Eterna Watch-24.JPG

Link to comment
Share on other sites

This is actually a watch repair forum, even if many members are knowledgeable on the matter, estimates aren't discussed often. 

I suggest that you look on chrono24.com for similar referencens. 

Edited by jdm
Link to comment
Share on other sites

Thanks, and I apologize.

This was just the only place I could think to ask.

I looked on the site and they did not have one listed either.

Forget the value, has anyone ever even seen one of the watches before?

Maybe I do have the only one in the world,.

Although I doubt it.

 

Link to comment
Share on other sites

You could try asking Eterna about the watch. They are still around.

ETERNA SA
SCHÜTZENGASSE 46 • CH-2540 GRENCHEN • SWITZERLAND
TEL. +41 32 938 23 82
[email protected]

Assuming the watch is genuine, and assuming it is made of gold, then it will have at the very minimum, its scrap value, however it looks like a pretty unique watch, so I'm sure its value will be much higher than that.

Edited by AndyHull
Link to comment
Share on other sites

Eterna was aquisitioned by a Hong-Kong base jeweler and watch retailer some twenty years ago. Surely you can find and contact the jeweler this rich.

Chances are some Asian made caliber train is fitted in the ebauche of you watch.

Other than this, look for a caliber on the movement, post ID this movement which then can be a subject for discussion on this forum.

Good luck

 

Link to comment
Share on other sites

Being in Southeast Asia I've seen a few of the newer Eternas.. They're usually Hong Kong cases but the movement is a proper ETA. Here I believe its also an ETA from the look of the set-lever/spring, in fact you can see a bit of the date-wheel track on the edge of the plate covering the keyless stuff. Also if you look for the balance-cock screw it looks like an ETA design.

Interesting but not really valuable .. the reason it's pretty rare is probably because its not really good at telling time (as you've discovered!).

Anilv

edit.. up to a few years ago you could buy a NOS Eterna case/dial/band/crown/hands/movement spacer on ebay. You just needed to add a 2836 (or similar movement).

Edited by anilv
Link to comment
Share on other sites

3 hours ago, Nucejoe said:

Chances are some Asian made caliber train is fitted in the ebauche of you watch.

No. Both at the time the OP's watch was manufactured Eterna used in house (1429 and other Eterna Matic) mov't, or I suppose, other Swiss.
It was and still is a top Swiss brand. 

Edited by jdm
Link to comment
Share on other sites

The watch is from a range made by Eterna in the mid 80's up to the 90's called the "Galaxis" they where available in various versions, this is the first I have seen with a skeleton movement, I think it is a bi metal 18ct and stainless model, if it is all gold it will have Swiss hallmarks on the case and the clasp, if it is indeed all 18ct gold then my guess is that it would be worth the value of its gold.

They do not fetch great prices and have sold recently on ebay for between £100-250 for  bi metal watches because it's unusual it would be worth a bit more but I suspect not a great deal more.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • When faced with say a pocket watch bridge which is cracked, silver soldering to repair is often the only option (hopefully someone wasn't there before hand with soft solder). I can generally do this succesfully and tidily with a small torch and miniscule pieces of silver solder, but on parts which were mercury amalgam gilded the heat can have have a deleterious effect on the finish.   I keep wondering if there's a good way to refinish these - and despite having the needful items would rather avoid using the mercury process.   In the past for electronic work I've gold plated PCBs but this involved gold potassium cyanide solution, which also doesn't realy belong at home. I've read that there are now safer alternatives but couldn't find more detail (and importantly how similar are the results to amalgam gilding, since I wouldn't want to refinish the whole watch). Pointers would be very welcome (and yes, I know solutions containing gold won't be cheap!) Alan
    • The first one is an Unruh max stake for pushing out staffs
    • Ok so with the great answers for my previous question may I ask what these two attachments are used for. The one with the red knob is I assume used for hand setting the seconds hand? Jon      
    • According to Cousins site I need to look at document G22 as I think I need an ATGB at 304 but I cant find this size in G22 doc. The last thing I want to do is order the wrong one😳  Unless I cant see the wood for the trees 😆 I could be looking at the wrong style, I assume its classed as Round plastic Armed  https://www.cousinsuk.com/product/wide-ring-gold-atgb
    • When building a new Watch I have tended to use a file to remove the remnants of dial feet that are not needed as many dials come with four feet to accomodate different movements, but this can be a bit messy so now I use this with a great deal more precision as you can use an appropriate bit for the job and keep it very localised.      
×
×
  • Create New...