Jump to content

My Workbench....


mwilkes

Recommended Posts

...is a 19th century secretaire which is the perfect height, when using a low chair, for watch work. With a high stool it's perfect when I'm using my microscope (an old Olympus I picked up on the 'bay). I always like seeing other peoples' benches so I thought I'd share mine. I'm currently working on an omega 1020 movement - the cannon pinion is a real pig...

post-148-0-80888600-1414450285_thumb.jpg

  • Like 1
Link to comment
Share on other sites

I really envy those who have a dedicated work space. I have to set up and take down all my tools every time I work. My dream is to have my own separate room with air filtration and separate climate control. When I was a kid, my dad built a darkroom in our house. It would have been great for watchmaking.

Link to comment
Share on other sites

I really envy those who have a dedicated work space. I have to set up and take down all my tools every time I work. My dream is to have my own separate room with air filtration and separate climate control. When I was a kid, my dad built a darkroom in our house. It would have been great for watchmaking.

Before I had a dedicated area, I knocked this up, maybe useful to you, when I started off I needed a temporary space that would go away neatly.

http://watchinprogress.com/diy-table-top-homemade-watchmaker-bench/

  • Like 1
Link to comment
Share on other sites

  • 2 months later...

Amazing selection of tools! I'm only just starting to do the mechanical watches myself, we still outsource a lot of them though, I'm not confident at anything more than a day/date automatic right now! so buying new stuff each week, it's just so expensive!

Link to comment
Share on other sites

Amazing selection of tools! I'm only just starting to do the mechanical watches myself, we still outsource a lot of them though, I'm not confident at anything more than a day/date automatic right now! so buying new stuff each week, it's just so expensive!

 

Every time I look up a tool I might need they all end up being $40+ even for small hand levers.  I'm just going to start buying one item per month until I have a collection like Bob. Wife seems fine with it.... as long as she can also buy something for herself monthly too. 

Edited by BlakeL
Link to comment
Share on other sites

Every time I look up a tool I might need they all end up being $40+ even for small hand levers.  I'm just going to start buying one item per month until I have a collection like Bob. Wife seems fine with it.... as long as she can also buy something for herself monthly too. 

 

Let her buy the groceries ....... :)

Link to comment
Share on other sites

Well my next shopping list items are mainspring winder and staking set, when we bought the shop we inherited a lot of tools, like the pressure tester and back removers etc, a lot of them Bergeon too, but all mainly for Quartz work, battery changing etc

Link to comment
Share on other sites

We used to keep them in baskets labeled A - Z but now we have a computer system and job numbers this works best. It's just an ikea rail and hooks what you use in the kitchen.

 

Do you put them in the safe at night to lessen your insurance?

Edited by Legarm
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • When faced with say a pocket watch bridge which is cracked, silver soldering to repair is often the only option (hopefully someone wasn't there before hand with soft solder). I can generally do this succesfully and tidily with a small torch and miniscule pieces of silver solder, but on parts which were mercury amalgam gilded the heat can have have a deleterious effect on the finish.   I keep wondering if there's a good way to refinish these - and despite having the needful items would rather avoid using the mercury process.   In the past for electronic work I've gold plated PCBs but this involved gold potassium cyanide solution, which also doesn't realy belong at home. I've read that there are now safer alternatives but couldn't find more detail (and importantly how similar are the results to amalgam gilding, since I wouldn't want to refinish the whole watch). Pointers would be very welcome (and yes, I know solutions containing gold won't be cheap!) Alan
    • The first one is an Unruh max stake for pushing out staffs
    • Ok so with the great answers for my previous question may I ask what these two attachments are used for. The one with the red knob is I assume used for hand setting the seconds hand? Jon      
    • According to Cousins site I need to look at document G22 as I think I need an ATGB at 304 but I cant find this size in G22 doc. The last thing I want to do is order the wrong one😳  Unless I cant see the wood for the trees 😆 I could be looking at the wrong style, I assume its classed as Round plastic Armed  https://www.cousinsuk.com/product/wide-ring-gold-atgb
    • When building a new Watch I have tended to use a file to remove the remnants of dial feet that are not needed as many dials come with four feet to accomodate different movements, but this can be a bit messy so now I use this with a great deal more precision as you can use an appropriate bit for the job and keep it very localised.      
×
×
  • Create New...