Jump to content

My Workbench....

mwilkes

By mwilkes
in Tools & Equipment

 Share

Recommended Posts

64americandeluxe WRT Addict

64americandeluxe

Posted
Posted

I ended up using half of my garage as my wife threatened me with divorce when I attempted to create a work space in our bedroom (it has a north-facing bay window), but I digress.  I picked up a drafting desk that was headed for the landfill and removed the top and replaced it with cabinet-grade Birch plywood and a rail.  I also had to remove a footrest as it was originally intended to be used with a stool.  As it turns out, the height, width and depth is the same as commercially available units. A quick coat of paint on the base and I was set.  I also purchased the black storage unit from Ikea to store my tools and books.  The desk to the left was a Craigslist freebie that I use for my ultrasonic tank/cleaning.

post-38-0-03462500-1421526210_thumb.jpg

On another related note, I use espresso cups as movement covers.  They originally had a metal handle that I slipped off.  They work beautifully.

post-38-0-77082800-1421526421_thumb.jpg

PS: yes, it is usually this tidy (OCD induced :D ).  I can't work with chaos around me.

Happy watchmaking/breaking!

Roger

 

 

  • Like 1
Link to comment
Share on other sites
bobm12 Distinguished Member

bobm12

Posted
Posted

Hi Roger,

 

I like your "workshop"! To me, that's luxury mate! On a lighter note I tried to use the cups in the house and my wife was guarding them with a shotgun so I immediately went to plan B...purchase the real thing! As long as I don't touch her collection of China and whatnots she is happy! :)

 

Cheers,

 

Bob

Link to comment
Share on other sites
  • 3 weeks later...
PeterGe WRT Addict

PeterGe

Posted
Posted

I really had to do something to my workshop.

There just wasn't enough space to store all my tools/parts.

This became so frustrating (things were laying on the floor in the end) that I finally pushed myself to tackle the issue.

After a visit to Ikea and some time to put everything together, it's ready.

You can see the result below :-) Sorry, no 'before' picture available.

I'm really happy with the result!

post-371-0-83250800-1423128263_thumb.jpg

post-371-0-19689800-1423128203_thumb.jpg

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
    • joelcarvajal
      Gamblin Gamsol for cleaning?

      By joelcarvajal · Posted

      Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
    • nevenbekriev
      Main spring

      By nevenbekriev · Posted

      Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
×
×
  • Create New...