Jump to content

Brooklyn Beer Or Is It ?


Recommended Posts

I think thats an outstanding idea. 

 

By the way I was in a Book outlet called "The Works" yesterday and noticed they were selling rigid canvas boards 16 x 20 " for £2.00, 100% pure cotton stretched canvas - I have not gone all artistic on you but I do have a lovely new white work surface for my desk.

 

Cheers,

 

Vic

  • Like 1
Link to comment
Share on other sites

Hi Vic,

 

So you "re-surfaced" your desk with the canvas? How is it for bouncy watch parts? Does it behave properly or helped the little critters into nothingness? I'm curious since I tried to cover my work table with some light green sort of felt and it didn't work so I went back to what I had!

 

....I'll take the Budvar in the meantime....hiccup!

Edited by bobm12
Link to comment
Share on other sites

Hello Bob,

 

The canvas it fixed onto 3mm card so definitely not as bouncy as my pine desk top that I normally put a bit of A3 white cartridge paper on so I can see darker things that fly.  I thought that it is worth a try for a couple of quid.

Will see how it pans out, but today I am out to meet my ex work colleagues at the pub and will not be touching anything that requires concentration or single vision :D

I will however happily bore the S*** out of them talking about watches and may strap a few examples on each wrist - great being retired !

 

Cheers,  Vic

post-197-0-65970300-1414148297_thumb.jpg

Link to comment
Share on other sites

Excellent Vic, thanks for the picture and keep me posted of the performance of this canvas....and more important, enjoy the pub and make sure you do it for the both of us! mmm, I guess I'll follow track with what I got here: a Heineken!

Link to comment
Share on other sites

Vich you used canvas to cover your worktable?!? It doesn't sound like it would be that great to work on, but let me know how it turns out. On the topic of beers from Brooklyn, all I can say is that the local hipster store on the corner of Myrtle and Broadway has at least 60 types of microbrewery beers. Fortunately, I can't give you any more info Vich because I've never tried any of them. 

 

JC

Link to comment
Share on other sites

Hello JC,

 

Thanks for the info,  on my trips to see my son I usually have about a month in LA although last time I spent a week in San Fran.  The USA is massive and I should take in more I know but the focus will always be to spend time with family.  The In Laws are fantastic and I look forward to eating out - love Dim sum. Maybe I will get to see NY sometime who can tell. 

 

I have a life-long interest in trying out new and different beers, my preference is Cask Ale being a member of CAMRA but I must admit some of them taste pretty bad. Alchol is not to everyones liking which I understand and admittedly it is not always beneficial.  Where I was raised it is more or less cultural.  From the age of about 16 (should really have been 18) you met your friends at the Pubs or Working Mans Clubs referred to as CIU Clubs - Club and Institute Union (definitely not the same as the "Mans Clubs" in LA)  The magic words are "in moderation" but you only learn that as you get older - most of the time.

 

In CA there is an ample supply of good wine as well, though surprisingly some of the same wine is actually cheaper in the UK.  Another oddity is "bread" which is wierdly quite expensive compared to the UK, a large thick sliced Warburtons toastie is about $1.60 and similar costs twice or three times as much in LA  - never really got my head round that one. Anyway, I found the opposite for nearly everything else especially electronic and IT stuff.  I am rambling now so I will cut this short - Love my trips to the US.

 

As for the Canvas, I think my impression of canvas is a cloth stretched on a frame - sort of bouncy,  but this is actually just a rigid and solid white "canvas faced" board that rests on my work table in fact it is little more than a fancy bit of faced card.  I normally raid my wifes craft supplies for white A3 card and use that but this is a bit bigger.

 

Cheers,

 

Vic

Link to comment
Share on other sites

Curiously enough my working surface also comes courtesy of "The Works", but it's not the canvas board. I use their A4 self healing cutting mat (they also do an A2 but that's a bit too big) which is perfect for absorbing bounce, easy to clean, and easy on the eye for long periods. It's also cheap at less than £3.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Surely it depends on the clock , I only usually restore torsion clocks and I only use oil on mainspring ( small amount) but on the few so called normal pendulum clocks I have done I have used mainspring grease as there is more reserves of power than there is in a torsion clock so it is not so critical. Dell
    • https://watchguy.co.uk/cgi-bin/files?showfile=Venus/Venus 178.pdf&filename=Venus 178.pdf&dir=Technical Manuals&action=documents   The hour recorder is driven by the barrel and it will only stop if it is held by the hour recorder stop lever 8690. So I would check if this lever (powered by the spring 8691) is really holding the hour recorder in the "chrono off status". I haven't worked on a Venus 178 so far, but on an Omega 861 I chose 9501 grease for the friction spring as it's moving very slow at quite high tension.
    • All I do is use a fine marker (sharpie) to put the service date on the back cover, this way it can be removed with some IPA and does no permanent damage to the watch. I'm in two minds about the whole service marking thing, sometimes it's good/bad to see the markings on the watch case back as you know it's been worked on and vice versa. However, if I took my car in for a service and the mechanic scratched some code into the housing of my engine I wouldn't be too impressed. Hence, I think my sharpie solution is a reasonable compromise.
    • hmmmm.... maybe there is a way to skin that cat 🙀 let me think on it... unless anyone else has any ideas? I left the opening in the side of the base and ring quite large to maybe allow you to grip the crown, but appreciate this may not always be possible, especially for small movements where the crown will not extend past the outer wall of the holder. I noticed this also, but after using the holder for a while I noticed that the ring/holder began to wear into shape (rough edges/bumps worn off) and the size became closer to the desired movement OD. Maybe with some trial and error we could add 0.5 mm (??) to the movement OD to allow for this initial bedding-in?
    • Hi nickelsilver, thanks for the great explanation and the links! I'll take a good look in the article.  Especially this is great news to hear! Looking through forums and youtube videos I was informed to 'fist find a case and then fit a movement for it'. But seems that's not the case for pocket watches at least?  I guess I should be looking to find some 'male square bench keys' for now. I was thinking of winding the mainspring using a screwdriver directly, but I found a thread that you've replied on, saying that it could damage the spring. 
×
×
  • Create New...