Omega sweep second pinion friction spring - correct tension IS important

[mikepilk]

Not a question, but something I've learned that may be useful to others.

After cleaning an Omega 1012 the amplitude was low and all over the place - fluctuating between 220 and 240 deg. I couldn't get it any higher.  

The jewels, gear train, balance all look good.  

It took me a long time to identify the problem - I wasn't checking the gear train with the sweep seconds pinion fitted.
As soon as I fitted that, the problem was clear - too much tension on the friction spring (the spring pushes down on the pinion).

I knew the wrong pressure from the spring would make a difference, but I didn't realise how much. 

Now the amplitude is 280-290 deg. 

Another lesson learnt

[Chopin]

Yep, been in a similar situation with a different type of movement but same concept... Mine only made some weird noises and the seconds hand would stutter at times.

Why did they have to make watches so fiddly and complicated sometimes ?

[mikepilk]

1 hour ago, Chopin said:

Yep, been in a similar situation with a different type of movement but same concept... Mine only made some weird noises and the seconds hand would stutter at times.

Why did they have to make watches so fiddly and complicated sometimes ?

It does seem a weakness in the design, being so sensitive to the spring tension.

I've also had problems with the springs which push up not having enough tension, and the second hand slipper/stuttering. 

And the slightest tweek to the spring and the damn things break  

[rodabod]

It’s worthnoting the change in amplitude when the spring is fitted; it should just drop slightly when fitted. Say, as a rough ballpark, maybe 5 or 10 degrees. It need to be enough to eradicate shake on the pinion drive. 

[oldhippy]

You are learning fast grasshopper.

[Chopin]

1 hour ago, oldhippy said:

You are learning fast grasshopper.

Aren't we all ?

[mikepilk]

1 hour ago, oldhippy said:

You are learning fast grasshopper.

I'm learning, but not that fast - I had it in pieces 3 times before I found the error !

But persistence in finding errors is worth it You don't forget what you've learned the hard way.

A Smiths Imperial did try my patience recently - I had in in pieces 4 times before I discovered that it was the "new" mainspring I'd fitted that was useless  - not springy !  

[Deggsie]

I'm learning, but not that fast - I had it in pieces 3 times before I found the error !
But persistence in finding errors is worth it You don't forget what you've learned the hard way.
A Smiths Imperial did try my patience recently - I had in in pieces 4 times before I discovered that it was the "new" mainspring I'd fitted that was useless  - not springy !  

The more I learn, the more I realise I know very little. It’s a depressing thought [emoji3]


Sent from my iPhone using Tapatalk

[Simon1]

hi,

what the function of the sweep second pinion of Omega cal. 565 is please ?

is there sweep second pinion in Omega cal. 552 ?

My issue is that my Omega cal.565 stops every time I shake my hand, but it seems that the movement is not stopping, because watch is not losing time. Is that normal ?

Also,  is it the same for Omega Cal. 552 ?

I had same Omega before,  I don't remember second hand stoping that often from minor shake. The movement is supposed to be serviced,  so just wondering if that's normal

thank you

[rodabod]

Hi Simon. Does the seconds hand also “stutter”?