Jump to content

Citizen 6031 Movement Question

PJA

By PJA
in Watch Repairs Help & Advice

 Share

Recommended Posts

PJA WRT Addict

PJA

Posted
Posted

Hello there. My wife has an old Citizen 6031 watch which probably hasn't been used for at least 10 years (was belong to her late father) and after changing battery and not getting any reaction I've taken it to a repair and the gentleman basically put a drop of some liquid on it which made it works for about 5 minutes and then stopped working again. My question is could it be that the oil dried after many years of not working or how to go about trying fixing it? I have ordered a new equivalent movement which I am waiting for, but for my practice I just wanted to try to fix it even though it doesn't pay. Thank you for your assistance.

Citizen_6031-G08644_YO.jpg

Chopin Super WRT Addict

Chopin

Posted
Posted

Quartz movements can and certainly should be serviced just like mechanical ones. But we're usually talking about quartz movements that were made to be serviceable (so not the cheap chinese plastic ones...).

I would say that this one can be serviceable and you could certainly give it a try. I find them a lot more simple than most mechanicals.

Only wish they were larger in size as it's a fiddly job.

This type of movement could also require short circuiting it to start.

  • Like 1
PJA WRT Addict

PJA

Posted
  • Author
Posted
53 minutes ago, Chopin said:

Quartz movements can and certainly should be serviced just like mechanical ones.

I would say that this one can be serviceable and you could certainly give it a try.

 

Thank you.

PJA WRT Addict

PJA

Posted
  • Author
Posted
2 hours ago, Latvas said:

Have you tried line release cleaning

 

No, I haven't. I am just starting now with this hobby and not even know where to start, but can you give me a few words about how to go about it? I was trying to search it and can't find anything about it. Thank you.

  • Like 1
Neileg WRT Addict

Neileg

Posted
Posted

Most quartz watch testers have this function. It creates a spinning magnetic field that drives the watch mechanism at speed. This can be enough to break loose old crusty oil or slight corrosion and get the watch running.
It's a bit quick and dirty as watch repairs go but can be very effective especially if the watch has been sitting unused.
Neil


Sent from my iPhone using Tapatalk

  • Like 2
clockboy Distinguished Member

clockboy

Posted
Posted
7 hours ago, Latvas said:

go to ebay, and search for , quartz line release.


Sent from my iPad using Tapatalk

Line release is a novel way to release a gummed up quartz movement. However it does not offer a long term fix. I would relace the movement.

  • Like 1
Latvas Member

Latvas

Posted
Posted
Line release is a novel way to release a gummed up quartz movement. However it does not offer a long term fix. I would relace the movement.

i know but its fast and easy


Sent from my iPhone using Tapatalk
  • Like 1
PJA WRT Addict

PJA

Posted
  • Author
Posted
12 hours ago, Latvas said:

I was searching for line release tools and correct me if I'm wrong, as I see it only the Horotec Turbo spins the dials while the others do only battery check like with multimeter without opening the back case?

PJA WRT Addict

PJA

Posted
  • Author
Posted
14 hours ago, Neileg said:

The one I use is currently listed on eBay for 33.99 gbp as a Blue Sky

1

Can you tell me please if it spins the watch dials like the Horotec Turbo or just does the battery check up? Thanks.

PJA WRT Addict

PJA

Posted
  • Author
Posted

I've checked it and it doesn't say it clearly and in fact still waiting for an answer from the manufacturer. Thank you.

  • 6 months later...
PhillipN New Member

PhillipN

Posted
Posted

Have been able to fix the watch? I have the same watch with the same problem where it has been stowed away for years without any servicing and it has stopped working. And I was wondering if you were able to get yours to work.

 Share
Go to topic listing
×
×
  • Create New...