Jump to content

Lubristyl Swiss Precision Watch Oiler

TimFitz

By TimFitz
in Tools & Equipment

 Share

Recommended Posts

TimFitz WRT Addict

TimFitz

Posted
Posted

I have an empty Lubristyl oiler  from Otto Fre , and was wondering if I can refill it with meobius oil? I don't know if it is refillable, having been given it empty. I just thought it might come in handy.

Thanks

TimFitz WRT Addict

TimFitz

Posted
  • Author
Posted

Has anyone out there used one of these? I figured that with the lack of anything on this forum about how wonderful it is, it must not be? I do like gadgets!! :thumbsd: 

  • 3 months later...
trident Member

trident

Posted
Posted

recently I bght a set of auto oilers frm the bay. Unlike the Bergeon, tis does not dispense oil on the press of a button. A small drop of oil will accumulate at the tip n u just apply it.  Not sure if yours worked the same.

 

6h3ibt.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mikepilk
      Loose roller table

      By mikepilk · Posted

      Hole closing punches on something so small can be tricky - I found out the hard way how soft some roller are. If only slightly loose I use Loctite. Not ideal, but does the job neatly and can always be removed.
    • Mark
      Site Maintenance

      By Mark · Posted

      07-05-2025 - I will be rebooting the server in order to apply new security and software updates. Please do not be alarmed 🙂 it should not take more than a few minutes. Edit: Completed with no issues.
    • Mark
      Loose roller table

      By Mark · Posted

      Gluing or shellacing the roller in place should be discouraged as bad practice as, whilst it helps in the short term and gets the job done, it then becomes and issue for the next repairer down the line, or even worse, it becomes loose and negates the repair prematurely. The most effective and professional repair would be to cut a new balance staff. The other effective repair requires a special tool as mentioned by @Neverenoughwatches - however, those tools are extremely pricey, and would rarely be used, and so hard to justify the expense. If it is extremely loose (falls off with gravity) then it needs to be replaced, or a new balance staff cut. If its loose but holds still with gravity then I would be tempted to close the hole slightly with a hole closing punch on the staking set - quite risky but better than gluing.
    • Klassiker
      ETA 2472 - how to tackle this crown and stem?

      By Klassiker · Posted

      Richard and Andy both make very important observations, so let's take a step back and see what we are dealing with. Does the crown tube in the case have a thread on it? How did you remove the stem? Do you have a photo of the movement in the case? You might be able to remove the female part of the split stem and reuse the existing crown. Can you see a thread? There are one-piece stems available for the 2472 for reasonable prices. The split stems I found on ebay for the 2472 are a little more expensive, but have the male and female parts the opposite way round.
    • Nucejoe
      Victor Vuillaumre

      By Nucejoe · Posted

      Welcome aboard.  Your local watch repair shop might know how to fix it.     
×
×
  • Create New...