Jump to content

Cars control every year?


Recommended Posts

Do you have that where you live? Here we test our cars every year for rust,brakes;belts and more

I just what to say that a burdon was lifted from my shoulder today.  I can drive a new year again. Not bad for a VW polo from -99 with rust on the blue paint. But apparently its in good mechanic condition.  I am so happy :) Thank you god :biggrin:

How do you test your car or bikes or tanks  wifes .where you live? 

Edited by rogart63
Link to comment
Share on other sites

We used to have free (or was it around US$10?) mandatory emission tests for all cars every year but it has been discontinued for many years now. Each State is different since it falls under the State Laws (not Federal). It used to be a pain with the line of cars and all. If you didn't pass you needed to fix the car and do it one more time (Paid I think), if the second time around it didn't pass (within 90 days or so from the first time) you couldn't drive that car...or something like that.

Now you see more jalopies on the street than before....

  • Like 1
Link to comment
Share on other sites

The basic MOT was introduced in the UK in 1960. However it was very shambolic,it was only required if the vehicle was over 10 years old & it was easy to get a MOT certificate if you knew the right mechanic. Today it is more organised and garages are regulated. In the UK any vehicle pre- 1960 does not now require a MOT cert. 
However when I look back some of the cars I drove before this to be frank could have been death traps. The first car I owned was a Ford Anglia that had a modified engine fitted with twin webber carbs & it was fast. How fast I can not say as it would go off the clock but it was like sh*t of a shovel. When I braked it pulled severely to the left,the petrol gauge did not work & wiper blades were next to useless. Oh and rust holes along the bottom of the doors

There was lots of transport like this on the roads in the1960's. In my opinion it was and is still is an Important requirement by keeping off the roads dangerous & unroadworthy vehicles .  

  • Like 1
Link to comment
Share on other sites

5 hours ago, bobm12 said:

We used to have free (or was it around US$10?) mandatory emission tests for all cars every year but it has been discontinued for many years now. Each State is different since it falls under the State Laws (not Federal). It used to be a pain with the line of cars and all. If you didn't pass you needed to fix the car and do it one more time (Paid I think), if the second time around it didn't pass (within 90 days or so from the first time) you couldn't drive that car...or something like that.

Now you see more jalopies on the street than before....

I recall these emission testing revenue raisers, think the only ones who benefited were the repair shops and state. Having personally witnessed the transformation of automotive evolution from carbs to direct injection fuel delivery and computer command controls, I wonder if those 'jalopies' were less polluting!?!

Of course the unleaded fuel used now probably helps, but I have heard pains from classic car guys who wish they had a tank of leaded gas. I do wish they'd adopt some fed/state safety controls on the absolute junkers that for whatever reason folks feel compelled to drive.

  • Like 3
Link to comment
Share on other sites

  • 2 weeks later...

I live in France for part of the year and vehicles there are tested every two years ( controle technique ) , commercial vehicles have a supplementary emission every year, if your car fails ( contre visite ) you have 3 months to fix it and can still drive it during this time.

Motorcycles are not tested.  :ph34r:

Link to comment
Share on other sites

In Denmark it's every 2 years, costing about €65 (500 DKK) and if they find anything (failed dashboard light or so), you can fix it and come back within a month ....... costing you another €33 (250 DKK) for final approval

In Holland it's every other year...........costing just €25 and no extra if you have to come back.

I have to go this week for my 1996 Mitsubishi.......:startle:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Here is another option, if you have the patience to sort through the parts you usually find 50-100 screws as well as some other cool stuff. Most times I get an order from these guys I get a 250g box, takes a few days, but end up with hundreds of spares and all you need is for one of them to be useful and it pays for itself. Also helps hone your tweezer skills!
    • As Hector said they have too much  tension, that tension is also fixed and not easy to control. Conventional tweezers have infinitely variable grip provided by us. 
    • Thank you and i appreciate that, it looks very different    Thank you sir but i think there is a little problem according to that reading it's because it is far different to the other move that i serviced, i will atouched the photo. They are different movements but this one is 7s26b movement and they are also different in shape when it comes to the ballance assmebly. Thanks also for the concerned i appreciate that. 
    • Donor movement showed up, so I stole the bridge screw from it. Which made me sad, because it's in such nice shape! It seems a shame. Maybe I'll find a use for it one of these days. Unfortunately, the stem is for a different style of case and is much too short. Fortunately, I ordered a brand new stem from McCaw Company. Unfortunately, the crown on the donor movement is thoroughly stripped out (it unscrewed in a shower of brass) so i just put the old stem back in for now until I source a new crown. As you can see, it's just a little too long for this case. Overall I'm super pleased. I didn't think I'd like the bracelet, and even that is growing on me.   Anyone have a favorite crown assortment?
    • A couple of pictures of the front… Sorry, I’m months away from this one, but…there is an edge to the bezel but I see no obvious signs of previous bezel removal and it is quite thick so it would be difficult to grab an edge on the crystal with a crystal lift. It does look like in/out thru the back…good luck…
×
×
  • Create New...