Jump to content

Hello from a newbie

paul1977

By paul1977
in Introduce Yourself Here

 Share

Recommended Posts

paul1977 New Member

paul1977

Posted
Posted

Hello All.

I am interested in watch repair as a hobby. I have been looking at books and repair kits.

It would be great if professionals in this forum can direct in the right direction on the following list of things

  1.  Books
  2. Watch repair kits (looking at www.esslinger.com) --> any thought on the quality of this site.
  3. Witch should I start with for my first watch

Any help would be greatly appreciated.

Link to comment
Share on other sites
Ced Member

Ced

Posted
Posted

Hello Paul,

I was pretty much in the same situation when I started this hobby two years ago, so I am certainly no professional. 

This site helped me a lot: http://www.clockmaker.com.au/diy_seiko_7s26/ This is the best free source of structured information I could find so far, together with Esslinger and Mark's video of course... can't wait for his lessons to start later this month by the way !

I spent some time in Seiko modding, there are tons of sites about it. Thanks to these, I now feel confident enough to invest in more expensive parts in order to assemble my first ETA based watch later this summer. 

About books, I found most of them too advanced. There is one that provides a great deal of background information about watch assembly: https://www.amazon.com/Beginner-Watchmaking-Build-First-Watch/dp/1456451650 

True watchmakers will find this book ridiculously easy and sub-quality, but hey, we all need to start somewhere !    

Last but not least, I started with inexpensive Chinese and Indian made tools. Over time I got them replaced by German and Swiss made, as I realized how important the tools quality is in terms of reliability, accuracy, comfort...and therefore learning curve !

Cheers,

Cédric.

  • Like 1
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

Hello from me. You will find plenty on here.

If you are starting out on watch repairing and have little or no experience, get yourself some old pocket watch movements and practice on taking them apart and putting together. Do not buy the fusee type get the spring driven type they are very similar to a wrist watch but much bigger. Also get to know what the parts are called. Buy a good set of watch screwdrivers, a good pair of tweezers and different eyeglasses you will need a few, you might need to practice first in holding an eyeglass.

  • Like 2
Link to comment
Share on other sites
vinn3 Distinguished Member

vinn3

Posted
Posted

Paul,  welcome to the forum.   first you need magnification to look at very small parts,   ( i suggest a "head band magnifier" with replacable lenses) and some practice using tweesers to  pick up and move very small parts.  vinn

  • Like 1
Link to comment
Share on other sites
paul1977 New Member

paul1977

Posted
  • Author
Posted

thank you everyone for your advice and tips

Cedric: I prefer to get good quality tools right away. that way I will save money in the long run.

do you know a site where can I get swiss or german made tools, the site must be able to ship to Canada?

thanks

 

Link to comment
Share on other sites
bobm12 Distinguished Member

bobm12

Posted
Posted

Welcome Paul! Good tools are a plus and I agree with you to get the good ones straight away. Good books will help too, but you need to be ready for them as your watchmaking skills advance. Some pdf of De Carle are free on the net so that would be a good starting point.

Check Ofrei or the TimeZone Watch School for a list of tools needed...I've also found that quality (of the same name brand), choice and price are much better with ofrei than all the rest...although, cousinsUK sometimes are unbeatable even overseas. Also, don't forget to visit our tools section.

Cheers,

Bob

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Case back seals

      By Neverenoughwatches · Posted

      With something like this a gasket seal for instance if i cant find the relevant information i would use instinct to decide what fits and works best. You have the original gasket ( well maybe its original or hopefully it is )so its fairly easy to determine what material to use. Shape , for that i would look at the gasket seatings, are there grooves or recesses in either the case back or case or both, what shape are the grooves, flat or round etc, how does the gasket sit and behave in those seatings. Next thickness,that is going to be a bit of a guess, especially if the gasket is a soft one that has been heavily compressed over time. This is where a selection is going to come in handy, personally i would be choosing one that is giving me the feel of compression as its coming into contact with both of the mating surfaces. But not so much that the gasket is going to squash out and become distorted, again this is guesswork and feel is required with the allowance of compression over time, something you may want to check after six months. This part is a little moot as without a pressure test, good water resistance is not assured so the watch needs to treated as such and not as if it were a new diving watch ( not that i would treat any new diving watch as if were ). What you want to expect from your efforts is a little accidental rain catch, if you want more water resistance guarantee then a professional gasket replacement and pressure test is what you should be seeking which will be more than the value of this watch. Coincidentally i have the same watch, been searching for a stem for it for a while now. 
    • JohnR725
      Omega Constellation 1001 project

      By JohnR725 · Posted

      It might not be a hook it might be something like this. But still the mainspring is catching on something on the slip ring because it doesn't have its own outer slipping part like the modern ones. The image below came from some vintage Omega thing I'll have to see if I can find where that has gone to.documentation A different book has this          
    • ManSkirtBrew
      Omega Constellation 1001 project

      By ManSkirtBrew · Posted

      I did not see a hook on the slip ring. I will check again tomorrow.
    • JohnR725
      Omega Constellation 1001 project

      By JohnR725 · Posted

      I think I'm having a confusion here? You would apply the breaking grease to the inside of the barrel then the slip ring would go inside. Then the mainspring goes in and it catches on the hook on the slip ring.
    • ManSkirtBrew
      Omega Constellation 1001 project

      By ManSkirtBrew · Posted

      Thank you for the once again very thorough and informative reply. I'm sure at this point it's academic, but I'm always curious to know best practices. This then implies that If I'm planning to reuse the old mainspring (which I am), I should also reinstall the slip ring. I will do that and apply braking grease to the inside of the slip ring as if it were the barrel. This makes the most sense to me. Also, that bit about the center cannon pinion is very helpful. That wasn't in the tech sheet I have (attached) dated 1970. Omega 1001(1).pdf
×
×
  • Create New...