Jump to content

My Latest Project Watch Has Arrived.

Geo
 Share

Recommended Posts

Geo Distinguished Member

Geo

Posted
Posted (edited)

I've just bought a Seiko chronograph that requires a few things to get it up and running. I will strip the movement and give it a good clean and lube to see if I can get it firing on all cylinders. A new stem is required, but unfortunately they seem in the same storage location as hens teeth; the hunt is on!

post-124-0-20432800-1399984199_thumb.jpg

post-124-0-97208600-1399984213_thumb.jpg

post-124-0-90609500-1399984229.jpg

Edited by Geo
  • Like 1
Link to comment
Share on other sites
autowind Distinguished Member

autowind

Posted
Posted

I always wanted one when they were ultra cool back in 1970 something or other,  but the usual story,  never had sufficient funds,  Now I can have one the need is not so pressing.  That looks like a nice example and they still look cool,  whatever cool means.

 

There are a couple of videos on YouTube about the winding system, in case you are not aware of them,  if you search for seiko magic lever system,  it should find them.

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
  • Author
Posted

Thanks for your comments Roger, like you I fancied one back then. I remember wandering through the Spanish resorts with shops full of the things.

Regarding the autowind mechanism, I have serviced a couple of non-chronograph Seikos, so that bit won't be an issue. It's the chrono I want to get my teeth into because it is different from the ones I have been working on.

An interesting aside, I just found out that this was the first type of automatic chronograph in space!

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
  • Author
Posted

Try schillachi61 on fleabay, good bloke who stocks lots of Seiko parts. He has a stem listed on fleabay Ireland but not on the UK site as far as I can see. Definitely worth contacting.

Many thanks for the heads up, I really appreciate it. I'll check it out tonight.

Link to comment
Share on other sites
  • 2 weeks later...
Geo Distinguished Member

Geo

Posted
  • Author
Posted

A wee update.

I've had to get a few bits for this one; Crown, stem, balance assembly, movement retaining ring, pusher seals and springs, back gasket and bracelet.

I managed to get a new crown and stem, but I could not get one with the gear for turning the inboard bezel. Hopefully I'll pick one up in the future. When I fitted these I discovered a problem with the quickset day and date mechanism. It turned out to be an easy fix, it was diagnosing the problem that was the tricky bit. It turned out to be a distorted leaf spring, so a simple tweet with pliers sorted it.

Having sorted that, I took a look at the now running balance assembly and discovered that someone had glued the end of the spring into the cock. I've managed to buy a good second hand one for £6.00 so I'm well pleased.

Update to come!

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
  • Author
Posted

Balance assembly arrived today. I've tried it in the watch and it's running 12 secs fast with a beat error of 2.3ms. I'm well chuffed with that because I still have to service the movement and make adjustments.

Well I've had to order a second crown..........damn! I dropped the one I just bought and it has evaporated, even on my white carpet. What amazes me is it the first thing that I have not been able to find, and I've lost and found parts that are so small they would hardly irritate you eye if it popped in. A new one has been ordered, so you can guarantee the original will turn up now.

Link to comment
Share on other sites
  • 3 weeks later...
dailyticker Member

dailyticker

Posted
Posted

Thumbs up on your project!

 

Just sharing...

 

Seiko 6139 aka "Pogue" 

Seiko's calibre 6139, also introduced in 1969 displayed a combination of column wheel and vertical clutch. The clutch, the vertical variety is the chronograph component that guarantees the chronograph second hand does not flutter when activated. It prevents wear on the column wheel and ensures accuracy by aiding in maintaining balance amplitude. The really innovative thing about the Seiko calibre is a proprietary innovation: a 3-pronged hammer component called the magic lever that efficiently saves room and components. According to seiko it also allows all three chronographs hands to be reset in perfect unison

 

post-235-0-23439800-1402492607_thumb.jpg

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
  • Author
Posted

Thumbs up on your project

Thank you for that and welcome to the forum Jay.

I've been holding up completion of this project because I require the correct stem and gear assembly. If I don't find one soon, I'll have to compromise and build it without the inner bezel being capable of rotating. :-(

Link to comment
Share on other sites
dailyticker Member

dailyticker

Posted
Posted

Thank you for that and welcome to the forum Jay.

I've been holding up completion of this project because I require the correct stem and gear assembly. If I don't find one soon, I'll have to compromise and build it without the inner bezel being capable of rotating. :-(

Where do you normally source your parts from?

Link to comment
Share on other sites
  • 2 weeks later...
Geo Distinguished Member

Geo

Posted
  • Author
Posted

Hi Bob, the movement is a 6139B and the watch is designated Seiko 6139-6002. It would be great if you could help. :-)

I'm in currently renovating my kitchen, so it will be a while before I get back to watch projects. :-(

Link to comment
Share on other sites
  • 2 months later...
Geo Distinguished Member

Geo

Posted
  • Author
Posted

7629d3ae-b28c-4060-a30c-bf6e58a963b1.jpg

Finished at last. It required a lot more than I originally thought.

1) Stem with spring, bezel gear and crown. Many thanks to Roger "Autowind" for supplying this.

2) Pusher springs. The springs were missing.

3) Balance assembly and bridge. The stud was broken off the hairspring making timing impossible.

4) Delecate repair to bezel teeth. Damaged at some pint due to stem gear not engaging properly.

5) Required movement retaining ring and spring. It had been abused at some time and was cracked.

6) Replaced minute counter hand. A replacement had been fitted but was the wrong shape.

7) Replaced and lubricated all seals.

8) Totaly re-finished case.

9) Fitted new replacement strap.

10 Enjoying wearing it!

There is slight abrasion to the coloured outer bezel, I may replace it at a later date.

  • Like 2
Link to comment
Share on other sites
noirrac1j Distinguished Member

noirrac1j

Posted
Posted

Now that is a great watch!  I am scared to try servicing a chronograph for fear that it will end up as a pile of plates, screws, levers and wheels. Seems like you already ahead of the game if a new balance got it running...even if its fast, the overhaul should remedy that! Please post a step by step with photos when you get around to the disassembly so that I can get a sense of whether it is within my skill set? Thanks Geo!!

 

JC

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • mikepilk
      Omega snap on case back VERY hard to remove.

      By mikepilk · Posted

      I just got this ladies Omega cal 684. The problem is the snap on case back is very hard to remove. Each time has taken me about 5 mins with my case back tool, and after a struggle, it pinged off about half a metre in the air. I cleaned and examined the parts, all looks in good condition, with no damage and nothing bent. So I tried again - 5 mins and PING.   As the back is only 19mm diameter there's not as much flex as on a larger movement. I'm thinking of putting the back in my mini chuck, in the drill, and run round the inner edge with a fine file or wet and dry. Thoughts?   The weapon of choice :   A good idea ?  
    • Nick49
      Hello from Brighton, Sussex, UK

      By Nick49 · Posted

      New member, just saying Hi, and now busy finding my feet here. All the best, Nick
    • tomh207
      Without Our Forum

      By tomh207 · Posted

      Doesn’t really work for this, really it needs to be an invite only platform with good moderation. Full disclosure I spent a fair amount of my career as an IT/Network security consultant and am very touchy about what I may release on ‘tinterwebs.   Tom
    • JohnR725
      Without Our Forum

      By JohnR725 · Posted

      A better solution than having a list that will be compromised for spam would be to have a contact email. In other words an emergency email or even for that matter as separate website for emergency use as opposed to we all list out our names and emails and get spammed to death as there would be almost no way to protect that from bad people.
    • Sayajirao
      Mainspring winder question.

      By Sayajirao · Posted

      Thanks for the various replies. Here are answers to some of the questions/suggestions  switching the winding shafts doesn’t work because the no7 I need is significantly larger than the bore of the no6. i do have a set of chinese winders too, but as noted they’re movement specific and none fit the bill here.  I don’t want to replace the mainspring a)because I like to keep things as original as possible and b)where I live it’s tough to import parts so i have to wait long periods between supplies   so in conclusion I expect to be handwinding the spring this weekend 
×
×
  • Create New...