Jump to content

I Am A Newbie Needing Advise Please

beccy77
 Share

Recommended Posts

beccy77 New Member

beccy77

Posted
Posted

Hi my name is becky77 I am a newbie. I am a watch collector & enjoy learning more about various brands and I'd like to share & show my collection & view other collections aswell. I need some advice on repairing I have a ROLEX Submariner that I found with a friend in a Golf Champions throw out amongst a heap of his golf trophies in an old desk. Ot the front of his residence at Council clean up in a pile being thrown out for garbage collection. That he had thrown out. The winder has been unwound too much and is still complete but I don't know how to wind it back in to be functional. I was wondering how I should go about repairing it and then selling it. I will ask on this forum I guess after introducing myself in WRT Lounge. I will take some photos now & add so you can see the watch...

Please feel free to give me some advise and tips on how I should go about getting the watch repaired. Thank you in advance :)

Kindest regards, becky77

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted

Hi becky77 welcome to the forum . If you are a total newbie on watch tinkering i would not dig in to a Rolex watch or movement ? I  had some offer to service a Rolex but declined . I think you could probably sell the watch as is and get some  really  nice money for it . Or let a watchmaker service it for you. I don't now which is the best? 

Link to comment
Share on other sites
beccy77 New Member

beccy77

Posted
  • Author
Posted

Thank you rogart63 for your warm welcome! Thank you also for your positive advise, I sincerely appreciate you taking the time to respond & assist me by giving me some idea of which direction I should possibly take to get it fixed or sell as is...

311df4f15b9f06095a9af816e70927a6.jpg

I will also take a photo of the back of the watch aswell. It is an open back so you can see the mechanisms and jewels too! It's hand roll instead of tick as they should and it has serial number under watch band on side of the face of the watch as they should also...

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites
  • 4 weeks later...
Vich Distinguished Member

Vich

Posted
Posted

Hello Beccy and welcome.

 

Pity about the watch but keep looking and some day you will get lucky and find a treasure. 

 

Here is a pic of the real thing.  The markings on the face of the fake are not as precise and particularly, Swiss Made is in the wrong position being under the 6 o clock marker on the real thing and not around it.  There are other little signs as well but when you open these up the movement can often be Chinese on the mechanicals.

 

post-197-0-58606800-1449921470_thumb.jpg

 

Cheers,

 

Vic

 

 

Link to comment
Share on other sites
stroppy WRT Addict

stroppy

Posted
Posted

Hi Becky,

It is a fake & the problem I have and many have is if it is repaired but then it is sold as a genuine Rolex we are also party to the fraud.

What's the legal position on owning fakes in the UK and EU?  Over here in Australia the border customs people will turn a blind eye to a fake worn on your wrist and two or three in your bag (if you are coming in from Thailand or somewhere like that..."Fakes Heaven", in other words) BUT more than that they start confiscating or asking for duty.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      I read that same article last night  H.  I think epilame is too much headache for me, sources aren't always accurate, some conflicting. Such is the GRAVITY of this situation, Is it ok if i just STICK  to a thixotropic oil 🤣
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      Not sure I follow along. As I stated in one of my previous posts, the epilame will remain intact between rubbing parts as long as the surface is lubricated by oil or grease. Maybe it's just a coincidence, but note how the epilame-treated surface is illustrated in @Waggy's post. It looks like the oil is exposed to a binder (epilame!) so that it can't move sideways.
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      The epilame under the oil will also be removed  Unless the oil makes a barrier between the epilame and the escape teeth 😅 I think i need two strong coffees now 🤣
    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      If we use the rub-off epilame method of pallet stones (run dry for a few minutes before applying the epilame) where will the oil go/be transported when it is pushed away from the impulse surface by the escape wheel teeth? Onto the epilame-treated sections of the pallet! Once the oil has been applied/transported to the epilame-treated sections of the pallet where will it then go? Nowhere as the oil will remain on the epilame. So, perhaps the run-dry method defeats its intended purpose leaving the pallet impulse surfaces dry!? If, on the other hand, we do not remove the epilame from the pallet stones where the escape wheel teeth come in contact with them I'd expect more oil to remain where we want it and need it. Yes, I agree, that is the question, and my gut feeling tells me that is exactly the case. Epilame was created to have an adhesive trait and the oleophobic property is just a side effect.  
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      Might that be the viscous nature of oil resisting gravity H  ,  we have been comparing water and hydrophobic surfaces which are similar in principle but water is much less viscous than oil. I guess what we trying to discover is if epilame also has an adhesive trait as well as being oleophobic. Plus the oil dropet has very little mass for gravity to work on, like watching tiny water beads that can grip onto vertical glass until they are connected together to increase their mass then run down. Gravity isn't the only factor at play when oil is placed on pallet stones. The oil receives a lot of bashing that may push it out of position ? Thinking about it if the oil stays in position for 10 minutes enough time for the escape wheel to scrape off the epilame , then  a walled in lubrication has been achieved,  the epilame is no longer beneath the oil ( possibly mixed into the oil )
×
×
  • Create New...