Jump to content

Aphiwe From South Africa

ChronoBandit01
 Share

Recommended Posts

ChronoBandit01 New Member

ChronoBandit01

Posted
Posted

Good day gentlemen and ladies, 

I'm Aphiwe from South Africa and I have recently been intrigued by the world of watchmaking and horology. I'm here to gain insights, knowledge and share a helping hand in any way I can. 

Please DM some of your sites, I would be interested to see more about watchmaking and where to purchase vintage watches. 

Looking forward to the experience with all! 

oldhippy Distinguished Member

oldhippy

Posted
Posted

Thank you for your introduction and welcome to this friendly forum.

We all look forward to your contributions and continued involvement. 

If there is anything we can help you with don’t be afraid to ask. Nice clear photos can help a lot.

Nucejoe Distinguished Member

Nucejoe

Posted
Posted

Hi Aphiwe, man I sure like to hear how your name is pronounced, most names from your part of the globe sounds original when  prononounce. 

Welcome to the WRT forum  Pal. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • tomh207
      A lathe with indexing that won't break the bank?

      By tomh207 · Posted

      You also have another potential issue with head and tail stocks, in my research it would seem that for the American style lathes the head and tail stocks were bored as a pair. So a matched pair is good a “pair “ made up from two different lathes cause some headaches. The Swiss Geneva style lathes are much lighter but were apparently made to fit any lathe. I have seen mention of being able to shim the tailstock as well to true up. indexing is again not so straightforward for a watchmaker lathe, at least not as I have found so far. Often a lathe will come with basic indexing which is limited to 60 positions. The full index plates do come up at times for eywatering prices. It is very possible to do that electronically. As well as what @SwissSeiko maybe able to point you to have a look here. https://imakewatches.com/projects/CNCIndexDriver.html   https://imakewatches.com/projects/MillingAttachment.html   Tom
    • JohnR725
      A lathe with indexing that won't break the bank?

      By JohnR725 · Posted

      On a watch repair discussion group that you know that we love to see naked watches out of the case you show us a box? I think a book on watchmakers lathes should be helpful.   The watchmakers' lathe, its use and abuse; a story of the lathe in its various forms, past and present, its construction and proper uses by     Goodrich, Ward L https://archive.org/details/watchmakerslathe00good  
    • coreymsnow
      A lathe with indexing that won't break the bank?

      By coreymsnow · Posted

      Got it. So a WW lathe will have that graduated drive pulley for different speeds and similar setup for the bed and tailstock, but they won't be fully compatible with one another in terms of parts. Thanks! The picture helps a lot.
    • caseback
      A lathe with indexing that won't break the bank?

      By caseback · Posted

      If only things were so easy...😀. Both lathes in this picture are WW-style lathes.. nuff said? 😉
    • coreymsnow
      A lathe with indexing that won't break the bank?

      By coreymsnow · Posted

      Excellent info, thank you! So when you say "conforms to the standard" does that mean, for example, that parts are interchangeable between brands and ages, or that you could use accessories built for that 110-year old one on a newer one that was built in the 1990s? Also, thank you for taking the time to answer my questions and your patience.
×
×
  • Create New...