Jump to content

Greetings from India.

Roll1ex

By Roll1ex
in Introduce Yourself Here

 Share

Recommended Posts

Roll1ex Member

Roll1ex

Posted
Posted

Hey guys!

I started my watch hobby with opening table clocks around my house in my pre teen years when my parents weren't around.

No surprises that I couldn't put them back.  But what was surprising for my parents was that their watchmaker would not charge anything for the repairs and give back the clock within the day stating that: nothing is broken the piece was partially taken apart, all the parts were there in the bag, and the child seems to have just left the process where he could not figure out how to open take it apart or his tools were not enough to get the job done.


Fast forward to 2 years ago, I found the love for watches again and started to get all the vintage pieces (Watches and clocks) in my household properly restored.

I am known for being impatient but thorough, so here I am introducing myself after already asking for help in a thread 🙂 Its nice to meet you all and HMU if you know something about taming wobbly Rolex rotor.

oldhippy Distinguished Member

oldhippy

Posted
Posted

Thank you for your introduction and welcome to this friendly forum.

We all look forward to your contributions and continued involvement. 

  • Like 1
Waggy Distinguished Member

Waggy

Posted
Posted
10 hours ago, Roll1ex said:

I am known for being impatient

I'm also rather impatient, but when you have your head down and are in the zone 4 hours feels like 10 minutes, my wife often jokes that I have watches and clocks all around me, but no concept of time once I 'get in the zone'

  • Like 1
  • Haha 2
Roll1ex Member

Roll1ex

Posted
  • Author
Posted
On 5/14/2024 at 1:05 PM, Waggy said:

I'm also rather impatient, but when you have your head down and are in the zone 4 hours feels like 10 minutes, my wife often jokes that I have watches and clocks all around me, but no concept of time once I 'get in the zone'

Absolutely!

I started cleaning a dial today and did not realise when the sun set. This hobby is satisfying AF.

Roll1ex Member

Roll1ex

Posted
  • Author
Posted
On 5/14/2024 at 2:56 PM, praezis said:

Welcome! To which part of India will my greetings go?

Frank

Hey Frank!

 

Mumbai currently, but I am all over the place 🤣

HectorLooi Distinguished Member

HectorLooi

Posted
Posted

Hi @Roll1ex, welcome to WRT.

Is there a big second hand watch market in Mumbai? I seem to see a lot of used watches and clocks on eBay coming from Mumbai. 

I used to buy a watch every month from Mumbai on eBay. My mentor told me it was the best way to learn watch repair, by fixing everything that's not right. 

Roll1ex Member

Roll1ex

Posted
  • Author
Posted

@HectorLooi
Yes, I would say that Mumbai has the highest liquidity in terms used watches.

How was your experience with these used watches and what watch brands did you buy used?

I have always found the vintage luxury watch segment in India a bit shady. Quite a few are genuine watches with genuine matching parts but just not from the same one.

HectorLooi Distinguished Member

HectorLooi

Posted
Posted
4 hours ago, Roll1ex said:

How was your experience with these used watches and what watch brands did you buy used?

I've bought brands like Citizen, Seiko, Titoni, Tissot, Roamer.

Strange thing is many of them were using ST96 movements. I'm not sure if the ST96 is original to that model or whether it was a replacement movement. 

All the watches with nice looking dials were obviously refurbished, after-market dials. And all of them had over-polished watchcases.

Some of them had non-original hairsprings, rejewelled pallet forks, watch crystals that don't fit and glued in with a generous amount of glue. One of them was totally not working because the pallet jewel was loose to the point that it almost fell off.

But the sellers were very nice. The seller of the non-working watch gave me a complete refund. Some of them gave partial refunds.

I would say don't by luxury watches on the internet, regardless of the country the seller is from.

Don't believe the "serviced by master watchmaker" statement.

Have realistic expectations. ( Do expect the occasional complete junk.)

Do expect to do a complete overhaul and major repairs.

Otherwise, watches from Mumbai are great. For clocks.... I'm not so sure.

  • Like 1
Roll1ex Member

Roll1ex

Posted
  • Author
Posted

Hey @HectorLooi

Yeah, that's most of Indian watchmaking. Most watchmakers run on 'Jugaad' (look it up)

Watchmakers have offered me to drop in a new movement instead of servicing, (both quartz and automatic) stating its cheap.

When you talk about finding ST96 movements in a lot of watches I might know the general area and shops, these watches are coming from.

Some watchmakers massacre the watch from the inside but to an unsuspecting onlooker its all tip-top.

 

On 5/19/2024 at 10:05 AM, HectorLooi said:

I would say don't by luxury watches on the internet, regardless of the country the seller is from.

Don't believe the "serviced by master watchmaker" statement.

Have realistic expectations. ( Do expect the occasional complete junk.)

Do expect to do a complete overhaul and major repairs.

Couldn't agree more with  everything you said.

Most dealers have a watchmaker who can make the watch "retail ready" for cheap, some polishing, a bit of swabbing and Rodico, topped up regulating.



 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • watchweasol
      Oldhippy

      By watchweasol · Posted

      Get well soon Old Hippy, torn muscles.,  not good
    • SwissSeiko
      A lathe with indexing that won't break the bank?

      By SwissSeiko · Posted

      Id love to see how he has the output shaft mounted to this setup, as I have the same rotary stage and stepper in my build.
    • Poljot
      Broken watch stem in watch crown

      By Poljot · Posted

      If you see at least one thread protruding, or even a half, then you may have a chance using this "tool", but don't squeeze hard. Lot's of patience, and if you notice any signs of loctite or other adhesives, then apply several drops of acetone on top of broken stem. Use heat (hair dryer) also. You should be able gradually turn it counterclockwise, just like i did on this broken Timex stem, which was glued with something like nail hardener. Then you can use an extender to save your broken stem. https://m.media-amazon.com/images/I/513DVvkfW5L.__AC_SX300_SY300_QL70_ML2_.jpg   You can also try cutting a small grove / slot on top of the broken stem to use 0.7mm flat screwdriver.   Depending on the Crown material and Stem material, you can try dissolving the stem. 
    • ColinC
      What's your thoughts on this Rolex Sea-Dweller, ref. 16600, calibre 3135 project?

      By ColinC · Posted

      How long had it been without any wind before you first put it on the timegrapher?  Perhaps there was some debris / old lubricant that loosened up while you were waiting to do the 24 hour reading? I recently serviced a Seiko 6319 that immediately after service was absolutely horrible on the timegrapher - 24 hours later (without me doing anything) it was rock solid!  I was a little surprised by this (as I have seen improvements in amplitude after letting it run in but never a watch going from useless to great!). I was suspicious that some dirt must still be in there so I took it apart and cleaned and lubcricated it again and had exactly the same experience - snow storm that after some hours turned into a nice straigh line with good amplitude 🤷‍♂️
    • mbwatch
      Full plate watch, Suitable tool for adjusting & testing pallet stones?

      By mbwatch · Posted

      Yes, I know it was able to run before just enough that everything supposed to be affixed with shellac could fall out. I won't get back to work on this watch for several days at least, but one thing you mentioned about the banking pin adjustments being intended for fork horn clearance got me wondering.... The last adjustment I made to the entry stone yesterday did not solve the problem when the balance is installed. The escape teeth can't quite clear the stone when the balance swings. But I thought it was going to work because manually snapping the fork back and forth did allow the escape wheel to advance almost all the time. I wonder if there's another issue with the impulse jewel, that I have to shellac again anyway. I am going to measure the fork slot and the jewel because I am curious if it is the right size or possibly narrower than it should be. My thinking is if the horn clearance is too great maybe it is not getting enough impulse to clear the escape tooth. But pushing the fork with a tool can move it far enough to clear the escape wheel tooth.  I'll see later in the week. I didn't expect a big challenge from this watch because it ticked for 5 minutes before stopping without shellac. As always I was way wrong.
×
×
  • Create New...