Jump to content

Self introduction


Recommended Posts

I am an Australian  American living in the beautiful Gold Coast, Queensland Australia.

I love Grand Seiko and Seiko watches, and recently came back from the Grand Seiko Shizukuishi Studio in northern Japan where I was blown away by the design artistry and technical excellence.

More later on that (including photos, if interested!)

38468F30-EB96-4327-8EE9-89CF506E6153.jpg

E8F9F9C4-7342-4D39-A27A-4834461EE69B.jpg

  • Like 2
Link to comment
Share on other sites

Thank you for your introduction and welcome to this friendly forum.

We all look forward to your contributions and continued involvement. 

What happened you have already made 7 posts😀

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Guys, thanks for your help! According to the advice of a colleague @nevenbekriev, I managed to straighten the spring. Surprisingly, it turned out completely flat. Like new. And the watch after that, for the first time since it was with me, started running late. 🙂 That's great news!!! The rotation of the weights is about 190/200 degrees. In the past 12 hours, it was 4 minutes late. I still have enough room to speed it up. Looks like everything will be OK.  Thank you very much for your help!
    • Thank you for this post. Adding on to it, I've done a little digging trying to get the most bang for my buck. So I really wanted a set that had a base. You can buy the screwdrivers for around $33 usd 10 Piece Screwdriver Set. The base is around $32 usd Rotating Screwdriver Base (Grey) plus $20 in shipping, with tax you are looking at about $90 which is an excellent deal for what you get but I still didn't want to spend that much. I saw that they had the 9 piece set w/ base for $59 usd 9 Piece Screwdriver Set W/Base and I had a 'welcome discount' and got a matching 3mm screwdriver for 99 cents. 3mm Screwdriver. (without the discount the screwdriver is $6) With free shipping my total was $66.55 usd. So, I saved about $24 to go without a slot for a 3mm screwdriver. I'll take that! I hope this helps anyone looking to save a buck or two. Also, this corrects the issue of the orange 1.8mm screwdriver. 😉
    • No hex wrench needed there. Screw driver in case of AS1475 or just push the poinst down in case of Poljot2612.
    • Well, what is written here can't be explained with the wear of the winding/sliding pinion. Probably it is some kind of delusion from You side. But it prevented the people from pointing the reason of what is happening. Otherwice, this kind of wear is one of the common problems of winding works in watch movements. It meets often in old or cheap movements, or particulary in negative stem system pocket movements where not proper adjustment of the sleeve that guides the stem is done.  
×
×
  • Create New...