Jump to content

Recommended Posts

Posted

This is my second installment of my experience of watchmaking school.

 

I am entering my 4th week of school.  The way ahead still seems long and full of possible obstacles.  It is hard to imagine that there will ever come a time when I can begin to think of myself as a watchmaker.  I have been watching my instructor and fellow students who are farther along.  I've also watched many videos of watchmakers with almost a lifetime of service and I think that I may never come close to them. Perhaps it's best to say, following the family motto of the great explorer Ernest Shackleton, fortitudine vicimus?

 

As you work in our shop at the York Time Institute you have the feeling of being transported back to earlier era of watchmaking; more like a 19th century apprenticeship than a modern, clean, college of the science of horology.  It is certainly not as hygienic as the modern Swiss factory/laboratory (we have two dogs who pay us frequent visits!) but that is probably by intent, for our instructor is, when it comes to watchmaking, in large measure an antiquarian.  He loves old tools and techniques and the substrate of our craft: old watches and clocks.  I find it hard to consider such a love for the old as a defect—like so many modern people do.  And, anyway, I've found from experience that familiarity with the old makes for a better understanding of the new when such becomes necessary.  For example, I've found an understanding (and fondness for) 19th century classical mathematics of the type found in Whittaker and Watson's A Course in Modern Analysis or Hardy's A Course of Pure Mathematics, has served me well for embracing more modern math which, in spite of its labyrinth of jargon and complex sub-divisions, often seems like a fancy way to swat flies.  Ditto computer science.  Having, in a sense, gotten in on the ground floor, there are some concepts which I naturally understand.  So it seems to me that it is always possible to use to old as a springboard to the new whereas learning the new without reference to the old is like building a scaffold in the air.

 

I also accompany our instructor on house calls. Last week we visited two homes to repair grandfather clocks.  It’s good experience towards dealing with customers in their homes.  This is real apprenticeship, though we don’t call it that.  In fact, we do have apprentices but they’re far more advanced than I am.  Perhaps someday!

 

Since my first week I've been learning and restoring some tools I've acquired.  I recently obtained, at a very reasonable price, and 8 mm Boley lathe with a number of accessories in a, once nice, but now dilapidated box. I have almost a complete set of collets and a very nice set of gravers.  Most of the restoration will be of the box, which I started on today (Sep. 28).  So far it’s looking great.  I sanded it and put on a nice stain.  Tomorrow I’ll shellac it and repair the inside so that the lathe and its parts and accessories will be neatly stored as they were when it was new.

 

I've also obtained a number of free tools from donations made by people who, learning about our school, have generously given us surplus tools.  Some of these have to be refurbished but our instructor, because of his aforementioned love of tools, is of immense help.  Besides the lathe I have restored staking punches and stumps, a staking anvil, bench blocks, Vernier calipers and a vintage bench micrometer, etc.

 

I am told that I will soon be leaving the “grammar” of tools, their names uses and restoration, to their application or “logic” and that will be the subject of my next installment.

  • Like 6
Posted

Really enjoying these reports. You really have a great style of writing, keep up the great work & keep it coming.

Sent from my SM-G920F using Tapatalk

Posted

Nice bit about making house calls and looking at grandfather clocks/Longcase clocks. Do you get to fault find or just watch and leave it to your teacher? were they modern or the antique English type? I used to love house calls, I've been to some really large places sort of stately homes. It sounds as if your having a really good time so keep up the good work.  

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • My profile photo is age 20, last century, but I still look exactly the same so I'm not sure it counts ¯\_(ツ)_/¯
    • I sure appreciate your comment! I will look into one of those or maybe something similar. I of course will check your video to have a better idea.  by the way, that’s a beautiful lathe! Mine is a little peersless, but I just bought a Boley & Leinen that is on its way. That’s the one I am looking a motor for. It comes with a motor, but I want to replace it for  one that has a speed controller.
    • Indeed. I would not attempt one. Here is my messy Sherline setup
    • Hello everyone my name is Tom and I and I am new to the forum and new to the hobby. I have always had an interest in mechanical watches and finally decided to pursue it. I’m going thru online trading and have purchased the basic tools to set up a work area. I’m really looking forward to learning and thank you in advance for all of your knowledge!
    • This conversation is becoming a very confusing. The etachron system is a very nice system for manufacturing watches. As you know it consists of two components the stud and the regulator pins. Beautiful thing of this system is you can open up your regulator pins center the hairspring and as you close the pins they will close equally on both sides providing you centered it in the first place. It's not like you're going to become closer to one side or the other as the definition of the regulator pins is a bit confusing it's not exactly a slot sort of. I'm thinking maybe a little eight reading will be helpful for you. Then the file name was changed by me at the US patent but the wording of Seiko may or may not actually be attached to it soared up? I just did that so I can find it in my files. Normally patents are in people's name if they work for a company the company name will be there you'll notice the person lives in Japan which is interesting as the name would imply that this is a Swiss product. Somewhere I think I have the patents for the stud and I believe that is Swiss like a lot of things their Japanese and Swiss and then the Japanese let the Swiss name stand as it seems you more popular in case as you read up on the patents of the regulator pins or pin will see and it should explain exactly how and why it works also why it's important to always close at an open in specific directions because the pins actually have a shaped to them it's very hard to see the shape as it's very tiny.   As a reminder with this system it's mass-produced. I wouldn't be at all surprised if they use cameras and computers to do all of the adjustments.  The meaning of this is that the majority of watches will function as there supposed to and do what they're supposed to do the system will allow us for some minor in tolerance and has more than likely as I said no human hand is ever touched those watches that's the way they left the factory and they work fine. US2007091729A1 seiko etachron.pdf
×
×
  • Create New...