Jump to content

Certina Blue Ribbon "volvo"


rogart63

Recommended Posts

This is now part of my collection. Bought the watch at a car boot sale.  It was in good condition but didn't work. Broken mainspring.This watches where given to every employee at the Volvo factory in 1977. That was when Volvo celebrated there 50 anniversary. 1927-1977 . There are some different watches. All blue but different shades.  But can't say what the difference is? All are Certina blue ribbon. Inside is a Eta 2783 movement. And have put it on a original Tropic strap. 

post-644-0-84491000-1439234499_thumb.jpgpost-644-0-65386300-1439234487_thumb.jpgpost-644-0-38753200-1439234494_thumb.jpg

 

  • Like 1
Link to comment
Share on other sites

  • 9 months later...

Rogart, I don't know whether it's still of interest to you, but here is some additional information regarding your "50 years of Volvo" Certina: Volvo issued some 64,000 watches to employees not just in the factory but all around the world in order to celebrate "50 År Volvo - 1927 - 1977". Certina was at the time a prime supplier of watches to Volvo who issued them as 100,000-km-presents to valued customers. So it was quite natural that Volvo turned to Certina when it came to a gift for the celebration of Volvo's semi-centennial. 

Basically, there were two types of watches: for male employees, Volvo issued the Certina Blue Ribbon with a steel case, for women the Certina 'Mayfair' with a gilt one. The watches were taken from Certina's 1977 range. I don't know much about the 'Mayfair', but the 'Blue Ribbon' was actually equipped with an in-house movement, the well-developed 25-651/25-651M. I'm pretty sure that actually all Volvo watches were meant to be delivered with the in-house caliber. However, Certina's capacity at that time was at around 650,000 watches per year, and the production of mechanical movements was in the process of being wound down, so it's easy to see why an order the size of Volvo's, mopping up some ten percent of Certina's overall capacity, could not be fulfilled with in-house movements alone. 

Therefore Certina bought additional ETA movements (ETA 2783) which were refined and renamed "25-011". Because the arrangement of the date ring was slightly different, new dials needed to be used as well, with a slightly smaller date window aperture set slightly to the center when compared with the original dial. 

These dials were in a greenish hue (like in your watch) whereas the original ones were blue. Held next to each other, the differences between the two watches are easily discernible:

50_1379932325.jpg

50_1369913222.jpg

50_1465406244.jpg 

Enjoy your watch! I hope you brought it back to life!

Best regards

Andreas

PS: Do you drive a Volvo, too? ;-)

  • Like 1
Link to comment
Share on other sites

1 hour ago, Tomcat1960 said:

Rogart, I don't know whether it's still of interest to you, but here is some additional information regarding your "50 years of Volvo" Certina: Volvo issued some 64,000 watches to employees not just in the factory but all around the world in order to celebrate "50 År Volvo - 1927 - 1977". Certina was at the time a prime supplier of watches to Volvo who issued them as 100,000-km-presents to valued customers. So it was quite natural that Volvo turned to Certina when it came to a gift for the celebration of Volvo's semi-centennial. 

Basically, there were two types of watches: for male employees, Volvo issued the Certina Blue Ribbon with a steel case, for women the Certina 'Mayfair' with a gilt one. The watches were taken from Certina's 1977 range. I don't know much about the 'Mayfair', but the 'Blue Ribbon' was actually equipped with an in-house movement, the well-developed 25-651/25-651M. I'm pretty sure that actually all Volvo watches were meant to be delivered with the in-house caliber. However, Certina's capacity at that time was at around 650,000 watches per year, and the production of mechanical movements was in the process of being wound down, so it's easy to see why an order the size of Volvo's, mopping up some ten percent of Certina's overall capacity, could not be fulfilled with in-house movements alone. 

Therefore Certina bought additional ETA movements (ETA 2783) which were refined and renamed "25-011". Because the arrangement of the date ring was slightly different, new dials needed to be used as well, with a slightly smaller date window aperture set slightly to the center when compared with the original dial. 

These dials were in a greenish hue (like in your watch) whereas the original ones were blue. Held next to each other, the differences between the two watches are easily discernible:

50_1379932325.jpg

50_1369913222.jpg

50_1465406244.jpg 

Enjoy your watch! I hope you brought it back to life!

Best regards

Andreas

PS: Do you drive a Volvo, too? ;-)

Hi Andreas 

Very intresting to learn about how the watches was developed. And why there are two different versions. My Certina Volvo has left the building. It was sold to a friend that is a very keen Volvo fan. 

I see this watches a lot on Swedish auctions.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Right now I'm making do with a similar micrometer (the one below is $45 shipped but you can find better deals) and a $20 stand. You do have to be excruciatingly careful measuring jewels, since there's no table, but if you don't have the $500 to throw around, it's a nice option.
    • As  I kid, I'd watch Godzilla stomping over buildings and cars and I'd think to myself: Tokyo is a really dangerous place to live... . Cool watch!!
    • Next one up an AS 554, looks like a bit more to this one. First job is to check thickness, most springs are somewhere between .3 and .4, this one measures .35, that matches in with the .4 spring steel i ordered. So for marking up a permanent marker comes in handy to colour up the steel to be marked later with a scriber once its dry. Bestfit provide the extra bit of info for the jumper spring that is missing.
    • Thanks again, Marc.  Super helpful. I was wondering what the hole was for, and now it makes perfect sense. With your help and the other members here, it looks like I'm good to go with my Seitz tool set. I had to order some replacement pushers, but with those, the set is complete and in good condition. Now, I need to figure out what tool to buy to measure jewels (amongst other watch-related parts). I had my eye on the JKA Feintaster micrometers, but people get crazy bidding on them for $400-600 USD. I was thinking of just a regular digital micrometer (Mitutoyo). Thoughts?  Mahalo. Frank      
    • Yep, that's exactly how it should fit. The reamer shank is tapered and the socket in the spindle is also tapered so that the one centers in the other and is gripped tightly. If there is any wobble when the reamer is seated as far it will go then there is a problem. The cross hole in the spindle is to allow you the push the reamer back out again. If the reamer seated much deeper then it would limit the access for pushing it back out again. Here is one of mine for comparison.
×
×
  • Create New...