Jump to content

Recommended Posts

Posted

This is now part of my collection. Bought the watch at a car boot sale.  It was in good condition but didn't work. Broken mainspring.This watches where given to every employee at the Volvo factory in 1977. That was when Volvo celebrated there 50 anniversary. 1927-1977 . There are some different watches. All blue but different shades.  But can't say what the difference is? All are Certina blue ribbon. Inside is a Eta 2783 movement. And have put it on a original Tropic strap. 

post-644-0-84491000-1439234499_thumb.jpgpost-644-0-65386300-1439234487_thumb.jpgpost-644-0-38753200-1439234494_thumb.jpg

 

  • Like 1
Posted

That's an interesting collectors item you've picked up Roger piece you've picked up Roger, and a really tidy job of restoration. :)

  • Like 1
  • 9 months later...
Posted

Rogart, I don't know whether it's still of interest to you, but here is some additional information regarding your "50 years of Volvo" Certina: Volvo issued some 64,000 watches to employees not just in the factory but all around the world in order to celebrate "50 År Volvo - 1927 - 1977". Certina was at the time a prime supplier of watches to Volvo who issued them as 100,000-km-presents to valued customers. So it was quite natural that Volvo turned to Certina when it came to a gift for the celebration of Volvo's semi-centennial. 

Basically, there were two types of watches: for male employees, Volvo issued the Certina Blue Ribbon with a steel case, for women the Certina 'Mayfair' with a gilt one. The watches were taken from Certina's 1977 range. I don't know much about the 'Mayfair', but the 'Blue Ribbon' was actually equipped with an in-house movement, the well-developed 25-651/25-651M. I'm pretty sure that actually all Volvo watches were meant to be delivered with the in-house caliber. However, Certina's capacity at that time was at around 650,000 watches per year, and the production of mechanical movements was in the process of being wound down, so it's easy to see why an order the size of Volvo's, mopping up some ten percent of Certina's overall capacity, could not be fulfilled with in-house movements alone. 

Therefore Certina bought additional ETA movements (ETA 2783) which were refined and renamed "25-011". Because the arrangement of the date ring was slightly different, new dials needed to be used as well, with a slightly smaller date window aperture set slightly to the center when compared with the original dial. 

These dials were in a greenish hue (like in your watch) whereas the original ones were blue. Held next to each other, the differences between the two watches are easily discernible:

50_1379932325.jpg

50_1369913222.jpg

50_1465406244.jpg 

Enjoy your watch! I hope you brought it back to life!

Best regards

Andreas

PS: Do you drive a Volvo, too? ;-)

  • Like 1
Posted
1 hour ago, Tomcat1960 said:

Rogart, I don't know whether it's still of interest to you, but here is some additional information regarding your "50 years of Volvo" Certina: Volvo issued some 64,000 watches to employees not just in the factory but all around the world in order to celebrate "50 År Volvo - 1927 - 1977". Certina was at the time a prime supplier of watches to Volvo who issued them as 100,000-km-presents to valued customers. So it was quite natural that Volvo turned to Certina when it came to a gift for the celebration of Volvo's semi-centennial. 

Basically, there were two types of watches: for male employees, Volvo issued the Certina Blue Ribbon with a steel case, for women the Certina 'Mayfair' with a gilt one. The watches were taken from Certina's 1977 range. I don't know much about the 'Mayfair', but the 'Blue Ribbon' was actually equipped with an in-house movement, the well-developed 25-651/25-651M. I'm pretty sure that actually all Volvo watches were meant to be delivered with the in-house caliber. However, Certina's capacity at that time was at around 650,000 watches per year, and the production of mechanical movements was in the process of being wound down, so it's easy to see why an order the size of Volvo's, mopping up some ten percent of Certina's overall capacity, could not be fulfilled with in-house movements alone. 

Therefore Certina bought additional ETA movements (ETA 2783) which were refined and renamed "25-011". Because the arrangement of the date ring was slightly different, new dials needed to be used as well, with a slightly smaller date window aperture set slightly to the center when compared with the original dial. 

These dials were in a greenish hue (like in your watch) whereas the original ones were blue. Held next to each other, the differences between the two watches are easily discernible:

50_1379932325.jpg

50_1369913222.jpg

50_1465406244.jpg 

Enjoy your watch! I hope you brought it back to life!

Best regards

Andreas

PS: Do you drive a Volvo, too? ;-)

Hi Andreas 

Very intresting to learn about how the watches was developed. And why there are two different versions. My Certina Volvo has left the building. It was sold to a friend that is a very keen Volvo fan. 

I see this watches a lot on Swedish auctions.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Oh that's neat. I typically use a thin strap of rodico laid over the pallet fork to affix it to the upper plate but it can be hard to retrieve sometimes. And as I did more research, I may have just found your own earlier explanation: https://learntimeonline.com/forums/topic/potence-clip-for-full-plate-p-ws/
    • I've been on a ESA 9154 kick lately with this being the latest. A funkalicious 1970's Elgin Electronic with a brown and orange earth toned dial in a big old hunk of steel. Just like the last one this one runs from about -2 to +2 in 5 positions as it seems to be easy to dial these 9154's in.
    • I wonder what the theoretical size limit is for both a quartz and mechanical movement? 
    • I'm currently working on a Citizen 4520 movement. This has to be the smallest and weirdest quartz movement I've ever worked on. Firstly, it's small. Really small. Here's a picture of it next to a LR44 battery for comparison.  And unlike conventional quartz movements, the construction of this movement is really weird. The moment I took off the top plate, the rotor and 1st wheel are exposed. The PCB is right on the bottom plate. There are no dial side components and cover plates. Everything goes in from the rear. Not sure if I'm able to fix this watch. The old battery leaked and there are battery juice crystals everywhere. And there is a 1 uA constant leakage current, which will drain the tiny battery in no time. But at least there's still a pulse and the rotor twitches.
    • Afraid this is where it could get down to old school adjustment and observation. There are pallet setting tools..but the calibrated ones aren't cheap. The observation holes in the plate will allow you to see if you have one or both stones hanging up/ not engaging on a tooth, That would ofcourse require you to disassemble, heat/move the jewel in/out as required..by eyesight and experience. It's truly trial and error until you get close enough that you could make small adjustments with the banking pins until they drop to the lock freely. You can use a Potence tool to help hold the rok in place during reassmbly. Here's a pic of one...made with a piece of old 18s mainspring You just fold over a roughly 2 inch piece, then file a slot on the end that engages the pallet fork arbor
×
×
  • Create New...