Jump to content

Do i buy this watch ?


Recommended Posts

Eyup watch peeps. I'm not particularly  asking for help or advice,  just airing  thoughts on my dilemma of whether to buy or not. I'm somewhat patriotic in the way i collect Smiths watches and have a fair few of them in different models in various stages of restored and mid restoration waiting for parts. A missing one to add to the collection is the Everest ( quite pricey depending on the condition and material ). But one has recently entered my radar and i just cant decide if i should buy it or not. The price is very very good for the model, working and the condition is good and completely original. Good except for the dial, the patination is lovely but some heavy spotting.  Its worse than anything I've encountered so not sure how i would even tackle it or should. Any thoughts , input are appreciated people.

Screenshot_20230531-202809_Vinted.jpg

Edited by Neverenoughwatches
Link to comment
Share on other sites

28 minutes ago, LittleWatchShop said:

If it were my watch, I would prolly send the dial to have it refinished. It is ugly in the current condition IMHO. This, of course is a very personal decision...but you asked

I agree the dial is terrible which is the cause of my dilemma, but I'm all about originality with watches the exterior especially so refinishing is a non starter for me. The movement is important and has to work efficiently and is nearly always repairable but nobody sees that apart from me. But the case and dial everbody sees, the dial condition is the make or break of my purchase. 

Link to comment
Share on other sites

If the price is good I would go for it, or you'll regret it, especially if it fills a hole in your collection. I would do a sympathetic restore and just use flitz or similar on the case and a new worn looking strap and re-lume with tinted (coffee??) lume. This way you'll keep the watches rustic charm and the dial won't stick out like a sore thumb. As for the dial I would only remove any dust/debris etc and wouldn't go any further than that as you may end up snatching defeat from the jaws of victory.

  • Thanks 1
Link to comment
Share on other sites

17 minutes ago, Klassiker said:

I think I could get used to the dial.

I agree, they all look x1000 worse under high magnification, even the pristine ones. On your wrist without your reading glasses it will look awesome!

  • Thanks 1
Link to comment
Share on other sites

2 hours ago, Waggy said:

If the price is good I would go for it, or you'll regret it, especially if it fills a hole in your collection. I would do a sympathetic restore and just use flitz or similar on the case and a new worn looking strap and re-lume with tinted (coffee??) lume. This way you'll keep the watches rustic charm and the dial won't stick out like a sore thumb. As for the dial I would only remove any dust/debris etc and wouldn't go any further than that as you may end up snatching defeat from the jaws of victory.

In good condition around  £600  this is £200

Link to comment
Share on other sites

@Neverenoughwatches  I have seen NOS or LN astral dials in my late watch repairer's estate. 

Educate me of specifications of the dial you want please,  I  may could surprise you with a brand new dial for cheap.

What caliber is under the hood, I'd look it up.

Joe

Edited by Nucejoe
  • Thanks 1
Link to comment
Share on other sites

12 hours ago, Neverenoughwatches said:

Eyup watch peeps. I'm not particularly  asking for help or advice,  just airing  thoughts on my dilemma of whether to buy or not. I'm somewhat patriotic in the way i collect Smiths watches and have a fair few of them in different models in various stages of restored and mid restoration waiting for parts. A missing one to add to the collection is the Everest ( quite pricey depending on the condition and material ). But one has recently entered my radar and i just cant decide if i should buy it or not. The price is very very good for the model, working and the condition is good and completely original. Good except for the dial, the patination is lovely but some heavy spotting.  Its worse than anything I've encountered so not sure how i would even tackle it or should. Any thoughts , input are appreciated people.

 

I'd be tempted. I'm a fan of Smiths too and I've been looking for an Everest for a while. What is the movement? I have a 19J Imperial Cal 0104 - lovely watch.

Link to comment
Share on other sites

1 hour ago, RichardHarris123 said:

A redial is £100 to £150. Still a difficult question. 

A redial is something i couldn't live with. It would have to be an exact match and aged to be unnoticeable, a tall order for anyone.

1 hour ago, Nucejoe said:

@Neverenoughwatches  I have seen NOS or LN astral dials in my late watch repairer's estate. 

Educate me of specifications of the dial you want please,  I  may could surprise you with a brand new dial for cheap.

What caliber is under the hood, I'd look it up.

Joe

Thanks joe. The calibre is an 0104

47 minutes ago, mikepilk said:

I'd be tempted. I'm a fan of Smiths too and I've been looking for an Everest for a while. What is the movement? I have a 19J Imperial Cal 0104 - lovely watch.

The Imperial and Everest are almost identical apart from slight differences in dial markings and signature. Same calibre 0104 in fact the Everest automatic has Imperial signed on the rotor. I have actually just spotted a really good condition Imperial on Ebay for 250 or best offer. Basically the same watch except for the Everest signing.

Link to comment
Share on other sites

39 minutes ago, Neverenoughwatches said:

The Imperial and Everest are almost identical apart from slight differences in dial markings and signature. Same calibre 0104 in fact the Everest automatic has Imperial signed on the rotor. I have actually just spotted a really good condition Imperial on Ebay for 250 or best offer. Basically the same watch except for the Everest signing.

That's what I thought. So it's just the name on the dial which makes the Everest so much more expensive (apart from the auto which are rare and expensive).

I read that the 19J movements are the best, which is why I bought the Imperial. Think I might wear it today 😃

1.thumb.jpg.bdd913d01fe0aa90da4b3c98e53e59fb.jpg

  • Like 1
Link to comment
Share on other sites

15 minutes ago, mikepilk said:

That's what I thought. So it's just the name on the dial which makes the Everest so much more expensive (apart from the auto which are rare and expensive).

I read that the 19J movements are the best, which is why I bought the Imperial. Think I might wear it today 😃

1.thumb.jpg.bdd913d01fe0aa90da4b3c98e53e59fb.jpg

That is in beautiful condition Mike. The prices are very similar for the same model. The autos and sub dial Everest are 3x and 4x as much. I must admit i prefer the Imperial the signing is much nicer with the added crown. I think my mind is made up now. 👍

Link to comment
Share on other sites

8 minutes ago, Neverenoughwatches said:

That is in beautiful condition Mike. The prices are very similar for the same model. The autos and sub dial Everest are 3x and 4x as much. I must admit i prefer the Imperial the signing is much nicer with the added crown. I think my mind is made up now. 👍

Go for it 😀

Link to comment
Share on other sites

2 hours ago, Neverenoughwatches said:

Thanks joe. The calibre is an 0104

 I presumed the caliber show me the feet positions, google shows various bridge layouts. WHAT DIAL FEET POSITIONS DO I LOOK FOR?

I am sure I have seen Smith watch dials in his estate.

Rgds

Edited by Nucejoe
Link to comment
Share on other sites

9 minutes ago, Nucejoe said:

I presumed the caliber show me the feet positions, google shows various bridge layouts. WHAT DIAL FEET POSITIONS DO I LOOK FOR?

I am sure I have seen Smith watch dials in his esatate.

Rgds

I cant answer that Joe as the watch remains unpurchased. I appreciate your effort but take it no further please, I've just  looked at the watch again and the spring bar holes have worn completely through both lugs on one side. Cleverly hidden by an extra wide strap, i spotted something and asked the seller to confirm and post a close up. I very much appreciate the thought to source for me Joe.

Screenshot_20230601-122335_Vinted.jpg

Edited by Neverenoughwatches
  • Like 1
Link to comment
Share on other sites

2 hours ago, Neverenoughwatches said:

I cant answer that Joe as the watch remains unpurchased. I appreciate your effort but take it no further please, I've just  looked at the watch again and the spring bar holes have worn completely through both lugs on one side. Cleverly hidden by an extra wide strap, i spotted something and asked the seller to confirm and post a close up. I very much appreciate the thought to source for me Joe.

Screenshot_20230601-122335_Vinted.jpg

OK matey , but

First chance I get , I take and send you picture of his Smith dials. 

 

  • Like 1
Link to comment
Share on other sites

31 minutes ago, mikepilk said:

If any say "Imperial" or "Everest" they are worth getting.

Its often we come across Astrals and the de-luxe that have a dial letting them down. In the range is also the National 15 and 17 there may also be a 19 i cant remember.  I remember reading something about the name National being used to promote sales in an economy slump in the 60s. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hmmmm nice Mike , the Vertex was very popular over here, the brand was relaunched not so long back by the grandson of the guy that had a lot to do with their sales here.  Nice Dennison case as well, whats the dial matey.
    • I too have a cal 59, but it's in a gold case with no movement ring. What I'd do is look for a job lot of movement rings on ebay, and tweak one to fit. They are easy to cut and bend, and you don't have to be exact on diameter as there is a cut out for the stem
    • Well today was the day that we loaded the last stuff that we are getting rid of into a big skip that we hired to get rid of the spa bits. I pulled down my hanglider from storage in our garage and out with the spanners. The sail and some stuff that is not salvageable is all in the skip. The aluminium tubing and stainless brackets have all been reclaimed and have been stored. Why? I have been struggling to find the tubes that were demonstrated with the Joe Collins winder on YT anywhere, so I presume that they were made to suit. I haven't really been able to find any tube that I could use. I now have a plethora of tubing that is not just plain aluminium, but is aircraft grade aluminium and is a fair bit tougher. Different diameters as well so that is a bonus. Doesn't cover all the diameters of a set of spring C clamps, but beggars can't be choosers. I have already worked out what I am going to use some of the stainless for. I will attach it to my clock movement testing rig so I can then use the light gauge pulleys and ropes that I salvaged to set up a way for the clock movement rig to be pulled up to the ceiling when not required. I also have to route out some holes in the side panels of the rig so that pendulums can swing and so that I can see into the movements from the side. I really must take some other photos.
    • I really like these adjustable winders, in particular the multiple choice of arbor sizes within the same winding nut. Mine are the Star brand but that is more than likely just a retail name. If you find the spring ends snapping from slot to slot then just release some of the tension, let the spring unwind a little and then feed the end in by hand. A drop of oil on the insides of the prongs and ease off the edges of them makes them less harsh, but no personally i would leave the arbor hooks alone, try backing them out where the spring isn't so tight as it is at the very end, I've had the hooks release completely this way. 
×
×
  • Create New...