Jump to content

Timex Weekender Crown and Stem


Recommended Posts

Hello everyone! I'm new to the forum and I'm here to ask for help. The crown on my Timex Weekender has fallen off and I am looking for a replacement. I have found several models on Ebay but I don't know which one matches the Weekender. Do any of you know the part code?

Thank you very much for your help, greetings from Argentina

Link to comment
Share on other sites

12 minutes ago, watchweasol said:

Also our own Jersy Mo is the Timex Guru on this site. HE is the man.

The Timex Weekender is a contemporary quartz model that our guy JM most likely despise. No codes on dial either I'm afraid. All what has to be done is to measure the stem and tube dia to order a compatible crown. 

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

Hello everyone, first of all I want to thank you for your help.

Here I attach some photos that I took of the watch, the number that appears on the back cover is 05.

Perhaps with this information you can tell me the crown size that would be correct for my watch.

Again, thank you very much

unnamed.jpg

unnamed (2).jpg

unnamed (1).jpg

Edited by Argentinian
Link to comment
Share on other sites

29 minutes ago, Argentinian said:

Here I attach some photos that I took of the watch,

From the pictures it seems you've lost the stem also, not just the crown. Timex does not make stem or any other part available, they want people to buy another watch. But (maybe) if you reinsert the battery at 4:55, you can still use it.

  • Like 1
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Imm going to close the discussion by attaching the photo of my super-titanium after several vicissitudes finally working. Purchased as not working I replaced the battery and for a stroke of luck I found its semi-new solar panel which, having verified its operation, seems to recharge the accumulator perfectly. I had taken this watch almost by bet, with 40 euros I brought it back to life. The initial half idea was to resell it to finance another purchase, but.. it's definitely a nice item. It would need to check the impermeability but it's a pleasure to see it on the wrist 😃
    • In fact the secret is to go gently and find the way without forcing, and the movement enters without problems
    • Yea a have given it a full service this movement is chinese 2813 whats the lift angle for this movement does anyone knows  and how  do a remove the default  of 52 degrees on my timegrapher?   Hi you said my lift angle is default how do a remove this from my timegrapher?
    • Sure! Some very accomplished repairers never use epilame! I have often wondered if it is worth the trouble. Not using epilame will shorten the service intervals though, but that could be better perhaps both for the owner and the repairer!? Speaking of oiling, I just read this: After WWII in the 1950s the first Synthetic Oils came on the market. Most watchmakers did not rush to use these oils since they were bad for business now that the watch serviced with Synthetic oil would not come back to him for service for another 5-7 years he would lose a lot of income. ~Ofrei.com   Anyway, I wouldn't be surprised if it would be more correct to think of epilame as a binder rather than a repellant. Until convinced otherwise that's how I will think of epilame.
    • I read that same article last night  H.  I think epilame is too much headache for me, sources aren't always accurate, some conflicting. Such is the GRAVITY of this situation, Is it ok if i just STICK  to a thixotropic oil 🤣
×
×
  • Create New...