Jump to content

New Member from the UK

rockpenguin

By rockpenguin
in Introduce Yourself Here

 Share

Recommended Posts

rockpenguin Member

rockpenguin

Posted
Posted

Hello everyone,

My name is Andrew and I'm from the UK. I've just started tinkering with a non-runner I got from ebay for next to nothing and have been gradually sucked into what I think may well be a dangerously engrossing hobby! I know absolutely nothing about anything and was looking for a community to ask some basic questions... so here I am!

Sincere apologies in advance for being able to give nothing in return for the centuries of experience sitting at the other end of the internet.

Best wishes,

Andrew 'rockpenguin'

Link to comment
Share on other sites
  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ColinC
      Black coating on shock jewel metal housing

      By ColinC · Posted

      That black stuff - I had similar things happen with evaporust!  In that case I understand the evaporust eats the iron oxide away without hurting the metal but it can leave behind a layer of carbon which was in the steel that got oxidised. I spent ages trying to perfect a cleaning regime with various different stages in jars in an ultrasonic bath. In the end I switched to washing all but the balance and pallet fork in IPA and gently brushing it with a small artists brush.  I would estimate that I have found an extra 20º of amplitude doing this! It also takes me no longer than waiting hanging over a tank to move stuff to the next jar If it is really bad then I have used the IPA as a prewash and go through my old routine
    • Giogrlj
      Unknown mechanism

      By Giogrlj · Posted

      I thought is FHF. Sounds good to make winding stem by myself but I am not in watchmaking on this level. 😄
    • RichardHarris123
      Favourite timepiece.

      By RichardHarris123 · Posted

      Yes, Swatch, booooooooooo!!!
    • dnhb
      Long Case winding

      By dnhb · Posted

      At a friend's request, I've obtained a key for her long case clock which has been silent for some years. On winding it, the weight only rises a foot or so from the floor - & is not visible above the lower panelled section - before the key meets significant resistance. However it then runs quite happily for a day or so by which time the weight is again on the floor. I haven't had the chance to examine the movement but would be grateful for suggestions as to what might be happening here.
    • Neverenoughwatches
      Which Watch Have You Got Coming In The Mail ? Show Us !!!

      By Neverenoughwatches · Posted

      Despite having to change up your magnification and get your head into the super micro mech zone, I admit I'm not adverse to buying women's watches. You can finish up working on some good high end movements for a fraction of the price of men's. They also finish off that little black dress number and heels look on Saturday night outs. I would laugh but i have had some very odd Saturday nights out , ok go on then I'll laugh, i just made that up....ahem...😅
×
×
  • Create New...