Jump to content

Article re: a deeper understanding of horology


Recommended Posts

The writer makes a very good point, in saying that anything can be a clock.  I would probably say, "Anything can be a *timepiece*".  But purpose-built clocks and watches are better suited to fulfilling that purpose than many other things that change with the passage of time.  Watches are like little measuring tapes for time.  You can set the hands to an agreed-upon starting point, and then the works will regulate either a battery-powered motor or an uncoiling spring to not uncoil or move any faster than the turning of the Earth itself.  These little marvels can track the passage of our plot of land around the axis as it moves into shadow and away from, then back toward, the sun's rays.  They can, on an analog dial, easily show the divisions of time remaining to us before we can eat or rest or dash off to appointments.  We watch the little markers as they measure, not millimeters but seconds, not meters but hours.  Marvelous things they are.  I love them.  And I love thinking about time.

Link to comment
Share on other sites

6 hours ago, HectorLooi said:

“A clock is a flow meter for entropy,” said Milburn.

Entropy is a lack of order. Low entropy is perfect order, high entropy is completely evenly distributed chaos. If you take a handful of gas molecules in a two chamber box, they're pretty much never going to be all in one chamber because that's a state of very low entropy. The universe naturally wants to be uniform, and when we concentrate energy/mass, we make it less uniform; aka decrease its entropy. Energy/mass naturally wants to return to that more entropic state. Like heat dissipating throughout a room. Another example unfolding in front of me as I type this would be a toddler distributing toys, and releasing energy in the form of excited noises (only half joking with this one)...

Meanwhile, back at the lab...  Winding a mainspring concentrates energy, and it wants out. Entropy has been reduced, and the laws of thermodynamics demand that lack of order be restored. The escapement controls the release of that entropy, and the watch measures the flow of that release. Flow meter for entropy.

Anything can be a clock because everything is subject to the laws of thermodynamics, and will naturally seek maximum entropy. The challenge to making a cup of coffee a clock is knowing precisely how the entropy flows in that system within its environment, and then being able to measure it in a meaningful way. Heat distribution within a fluid, and across fluids of different viscosity (water and air) is extremely complex, and that's why coffee is a crappy clock. If you could figure out all the various intricacies of that energy flow (similar to the friction, metallurgy, lubrication, geometry, etc. in a clock), you could tell time with a cup of coffee.

There's a lot more to unpack in the article, I'm sure. I'll have to go back and re-read it when I have more time to noodle. It was a mind grapes squeezer for sure, and a fine mind wine takes time.

  • Like 1
Link to comment
Share on other sites

Jun Ye, the JILA guy interviewed in the article, just won a big award for that project! 2022 Breakthrough Prize in Fundamental Physics.

https://www.nist.gov/news-events/news/2021/09/nistjila-fellow-jun-ye-wins-breakthrough-prize-fundamental-physics

I've mentioned it on this forum before, but my best friend built the resonator (equivalent of the balance) for that device. Pretty exciting!

  • Like 2
Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...
On 9/9/2021 at 11:05 AM, spectre6000 said:

Jun Ye, the JILA guy interviewed in the article, just won a big award for that project! 2022 Breakthrough Prize in Fundamental Physics.

https://www.nist.gov/news-events/news/2021/09/nistjila-fellow-jun-ye-wins-breakthrough-prize-fundamental-physics

I've mentioned it on this forum before, but my best friend built the resonator (equivalent of the balance) for that device. Pretty exciting!

@spectre6000 Pointless name drop, but my brother was his graduate student at JILA. Don't worry, I am much less accomplished - but perhaps better with tweezers...

  • Like 1
Link to comment
Share on other sites

I'm not in anyway as accomplished as Jun Ye either, or even my friend who built that resonator for him. I just think it's cool and applicable to horology. We may know some of the same people. Are you in the area?

Since it's floated back to the top of the stack though, I saw a reference to Ye's project the other day. Seems the accuracy has been improved somewhat. Used to be it could track time dilation over a cm or so, and now it's down to a mm. An order of magnitude on something already that crazy is pretty awesome!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • RichardHarris123: Hello and welcome from Leeds, England.  I have family all over Australia, went as £10 poms Thanks Richard. Hope you’re able to visit your family here and that they’ve all done well 🙂 My relatives arrived from England in the 1790s transported on the ‘Second & Third Fleets’—a story of timber sailing ships, of convicts and doing well in this huge Country of Australia. When I visited the UK in the 1980s, I was too young to comprehend the depth and breadth of its history…  Best wishes, Mike William Chapman, my 4th great Grandad’s charges, at age 23 read at the Old Bailey; sentenced to 7 years of transportation to Sydney.
    • The whole process and the progress are closely observed, it's hand-driven and very controlled. I can't see the "danger", unless you are watching the TV while doing it. As you could have read, and in this quote "wheel" is the balance-wheel.
    • Have you got the pallet fork installed in the movement when you see the train move when using the setting works? As nevenbekriev said, without the pallet fork to lock the train, the behaviour you are describing is normal. If this is happening with the pallet fork installed, you have a problem in the gear train, it should be immobile when the pallet fork is locking the escape wheel.  The fit of the circlip above the pinions on that wheel is crooked in your pictures, it should sit flat up against the upper pinion as in Marc’s picture.  Hope that helps, Mark
    • Hi I got a Jaeger LeCoultre K911 movement, where one of the stems was broken. Part no. Should be 401.  Im based in Europe and tried Cousins but its discontinued. They except to get stem in stock for cal. K916 but will that work? Or Is there a way out to join the ends?
    • The part was how it fell out of the movement - the train wheel bridge wasn’t screwed in.    I’ll probably dismantle the part, if I can, to work it out.    The train of wheels ran fine - it was only once the keyless works were installed I noticed the problem. 
×
×
  • Create New...