Jump to content

Recommended Posts

Any pointers appreciated, it’s on my work laptop so I’m thinking it’s something the admin monkeys have done. The forum worked perfectly not long ago but now this, see picture. And it’s only this forum that it’s happening to. 

im on google chrome and windows 7 if that helps

 

9E791231-6D03-4ECF-A976-5C9EFAF92CB8.jpeg

Link to post
Share on other sites

Works good for me on all devices, no other reports at this time. Try purging cache and cookies, this can be done on a per site basis. 

Link to post
Share on other sites

I think that IT departments have the ability to stop webpages downloading the graphics portion of webpages. I have had the above happen on my home iMac, but reloading the page generally fixes it. Different circumstance obviously, but I have had it happen.

As far as I know, when you get this, all the links work correctly, you just don't get the graphics portion. Do you get the same thing happening if you now click on one of the links on the page?

Link to post
Share on other sites
5 hours ago, Michael1962 said:

I think that IT departments have the ability to stop webpages downloading the graphics portion of webpages. I have had the above happen on my home iMac, but reloading the page generally fixes it. Different circumstance obviously, but I have had it happen.

As far as I know, when you get this, all the links work correctly, you just don't get the graphics portion. Do you get the same thing happening if you now click on one of the links on the page?

I’ll give you a heads up this evening with pictures of what I see, basically it’s like the picture before but with huge full screen single letters between each subject, I can’t click on a link to see the contents of each subject 

Link to post
Share on other sites
2 hours ago, transporter said:

I’ll give you a heads up this evening with pictures of what I see, basically it’s like the picture before but with huge full screen single letters between each subject, I can’t click on a link to see the contents of each subject 

Have you tried the above said clearing of cache and cookies, as well another browser?

 

Link to post
Share on other sites

Yeah cleared cookies and cache of whole internet history, signed out of forum and back in again and still no change, apologies for no pictures tonight as promised I will put them up first thing tomorrow 

Link to post
Share on other sites

Well nothing is working so no forum for me on my laptop. 
All other forums are working perfectly, I’ve changed browsers and settings and emptied caches and cookies signed out signed in etc etc and still the forum won’t display 

Link to post
Share on other sites

Ok this is interesting, when I scroll down to resources on the forum, and I click on essential day 1 lubricants etc for the watch course everything displays correctly.  But as soon as I go to main forum it reverts back to the unusable, very frustrating 

Link to post
Share on other sites

Yes, it’s working fine on all my other devices. So it’s something to do with either the site or the laptop.

I say the site as every other forum I’m on displays correctly, as did this one until recently.

Link to post
Share on other sites

Ok. Hope this doesn't come across as dumb. Have you installed or deleted anything recently that you think may have happened around the same time you noticed the issue with the forum?

Link to post
Share on other sites

No nothing uninstalled, the works laptop is pretty strict on all things like that, I can’t even have my own desk top background installed anymore as they stopped that with everyone.

I have been informed that there is a new google Update coming soon, so I’ll wait for that to be patched in and see what happens then.

Link to post
Share on other sites

If you are indeed allowed to use your work laptop to view the forum, I would suggest that for some reason your IT department has flagged the page that you are accessing that does not display correctly. Subsequent pages display correctly as their address differs from the address of the incorrectly displayed page.

Might be the result of some automatic security software.

Ring your favourite IT guy at work. Best of luck.

Link to post
Share on other sites
2 hours ago, Michael1962 said:

I would suggest that for some reason your IT department has flagged the page that you are accessing that does not display correctly. Subsequent pages display correctly as their address differs from the address of the incorrectly displayed page.

That is technically impossible. WRT (just like any other serious website of the world)  uses HTTPS with which all the content exchanged, including which page is being accessed, is encrypted end to end. The clear text HTTP protocol is disabled. That means that anyone that is even able to intercept the communication, (lke an IT dept) can know that one is accessing it, can block it or even redirect the access, but cannot see or modify what is being transmitted in ether direction. 

Link to post
Share on other sites

I’m open to all suggestions so keep them coming please. I’m going through all settings etc trying to accept cookies etc amongst other odds and sods to try and make it work in the laptop. 
Im still waiting for the update to filter through and when it does that might make a difference but I’m not holding my breath to be honest 

Link to post
Share on other sites

Well I popped into work today to compare settings of laptop to desktop whilst on google chrome, so I set my laptop up next to a desk top logged on and headed to the forum.

Well here’s a surprise, both the laptop and the desktop displayed the forum incorrectly!!
So now I’m stumped, something must be wrong with the internet settings on every desktop/laptop that are on the works system.

Link to post
Share on other sites

 Easy isn’t it, to be fair I don’t actually spend a lot of time browsing as I’m more out the office than in, but a little down time Is nice. 
But it’s strange how it’s just this site that doesn’t display, even had the google chrome update done yesterday and still no difference

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Yes it can;  perhaps impulse jewel can't enter the fork horn, if the shock has  knocked a pallet jewel out of alighnment or bent a pivot. Remove the two black screws then the automatic device, loosen the cock screw by couple turns, raise the bridge just enough to pass the impulse jewel over the fork so to get impulse jewel inside the horn, tighten cock screw. It will run, however , might get stuck again if pallet jewels have got misaligned or a pivot has got bent.
    • A little uninspiring.  It does run though...kinda.
    • I decided to find a knew winding pinion for my Vulcain.  I see some wear on the one I have.  I have the spec sheet on the Vulcain 120 and identified the part as #1246.  I searched around and found scotchwatch.com had one.  $45.  I really want it, so I bought it.  Meanwhile, I continued my search and found a part with a different part number (410) on Northern Watch & Clock Supplies in the UK.  It was just a couple of pounds, so I bought it. Later I looked at the invoice from scotchwatch.com and see that the part I bought is 1246 (410), so I think the part has two numbers.  Well, we will see when they arrive.  On part cost 20x the other one.  I am not complaining...as I am glad that someone takes the effort to maintain an inventory for budding watchmakers like myself.  I just think it is interesting. Learning new things every day.
    • Thank you for your introduction and welcome to this friendly forum. A nice looking watch you are wearing. 
    • The hairspring is partially blocked from view by the autowinder but looks to be ok.  The balance swings with a puff in one direction but not the other.  Could it be the position for the impulse jewel and fork?
×
×
  • Create New...