Jump to content

Mainspring winder


Willow

Recommended Posts

2 hours ago, LittleWatchShop said:

Another shiny object!  LOL.  I could not resist pondering a 3D printed solution for some of the parts.  I don't have the plans...just taking a SWAG at what I see on the youtube videos.  Here is one of the slides.  The mate for the slide is a trivial design and print as well.  I just quickly laid out this piece.

2021-01-30 09_33_14-FreeCAD 0.18.png

I would think a 3D printing system would be a perfect platform to make this and other repair tooling. I've worked with them on occasion and find them super fascinating.  

Link to comment
Share on other sites

3 minutes ago, MechanicMike said:

I would think a 3D printing system would be a perfect platform to make this and other repair tooling. I've worked with them on occasion and find them super fascinating.  

It is one of the most utilitarian tools I have other than a screwdriver.  I have repaired many things around the house by printing replacement parts.  I have also created many tools and add-ons to other tools.  There is a huge repository of designs that others have done on the internet.  I love to make my own stuff--do the 3D design but when I find someone has made what I need, I download and print!!  Below I show a picture of a 3D printed fully functional escapement that built three or so years ago.  It is a wonderful demonstration of how the escapement works.

2021-01-30 11_53_38-Photos.png

  • Like 1
Link to comment
Share on other sites

I own a Ollie Baker mainspring winder and also a home made one made out of wood and a converted mainspring winder. Both work great the issue to be aware of wood changes in shape as it ages and changes as it takes up or looses moisture so it looses its original smoothness in operation. The issue with the Ollie Baker is you are required to hold the barrel with one hand while winding with your other hand. I got around this by making a various sized wood clamps to hold the barrels see pic below for both my hand made winder + the Ollie. I know my hand made winder looks crude but be assured it works and is better and safer than trying to wind springs by hand. 

7FF3E5F6-6FF7-4EC5-9395-A4B9BB798C5C.thumb.jpeg.02b8197d0d4a66823d5779d5dc8329f8.jpeg

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

Hi  I like the way that you have modded the spring winder, I also used the let down tools as fit the spring arbour properly. As for looking crude the fact is it works and it overcomes the problem of holding springs by hand.  The wood if and when it becomes less effective can be replaced cheaply and effectivly.  I used mahogany for the clamp its good and hard. A Great idea, engineers answer to a problem based on what you have available. I for one think its brill.  It May inspire others to do something similar.

  • Like 1
Link to comment
Share on other sites

33 minutes ago, watchweasol said:

Hi  I like the way that you have modded the spring winder, I also used the let down tools as fit the spring arbour properly. As for looking crude the fact is it works and it overcomes the problem of holding springs by hand.  The wood if and when it becomes less effective can be replaced cheaply and effectivly.  I used mahogany for the clamp its good and hard. A Great idea, engineers answer to a problem based on what you have available. I for one think its brill.  It May inspire others to do something similar.

Thanks yes it works but it is not the best engineering for sure. The clamping system I use is really good when dealing with either small or large mainspring barrels. The key to working with mainsprings is having control.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That's the right technique Mal 👍 If you are ok with a loupe ( which I'm not ) then pick up the dial in your left hand and make a tripod holder out of 3 fingers and then exactly how Mal and me described with your right hand, press and flick out the stem at the same time. You need three fingers to do this, i use my ring ring finger , sounds like mal uses his little finger, just whatever you feel comfortable with. The key point and dangerous side to this is the tweezers or driver slipping off the release screw. Stablise your left arm by resting your elbow on your bench, so that you can hold the movement horizontally flat, use a x5 loupe to view  and good light so you can see well and have a good tight fitting screwdriver to push the release down. Or as suggested a pusher mounted solid upside-down somewhere then all you need to do is push your movement up to it. I'll rig something up in a bit to show you what i mean. Something like this, but tbh its better to just learn to do with your fingers.
    • Thanks Michael, shes a real soldier, it would take a tank to knock her off her feet.  Shes surprised even me and i knew she was a tough cookie.  Good for you Michael, you keep at it. I've been reading your posts re. your watchroom they're inspiring and it doesn't matter how long it takes you to get there its about the journey. Rome wasn't built in a day, our watchcaves are our solitudes, our own little empires where we can shut ourselves away from the crap that goes on around us in the world. I look forward to seeing you progress, I have my own ideas how i like to do things. But in answer to your questions on that thread, just let your workspace evolve around you and how you work. You wont figure it out straight away but you will know when to change it and when to leave it alone. But most of all just enjoy it.
    • That can be tricky. Sometimes I hold the movement from the edges in left hand and with right hand I push the release with tweezers and simultaneously pull the stem out with right hand pinky or something. 
    • I see what you mean. I must admit I’m not entirely comfortable with that but I can’t see a better method than what you suggest. I’d like to see something like this mirror with a short spike: https://www.cousinsuk.com/product/mirror-for-observing-movements Place it on, push the spike on the post with one hand and release the stem with the other hand. Minor problem, it doesn’t exist.
    • Hope you mum keeps on mending. I was adamant that I was going to get myself going after my stroke. I was only 52. I still have a lot of life left to live. Some people give up. Some people don't let it beat them. Your mum sounds like one of the winners. 👍
×
×
  • Create New...