Jump to content

Recommended Posts

Posted

So, my external hard drive was just about full. It holds all my watchmaking files, from various makers, a lot of it no longer findable out on the net.

Also, years of photos, including the raw magazine articles that were eventually published; all the support work for my BMW engine swap manual..

Literally like ten + years of research and collections, including lots of irreplaceable stuff.

The driver/cause was a new external drive. The plan was to move all but the watch stuff over to the new drive, and take the old one home for use where I do my watch work.

The new drive had a problem while formatting, and while trying to sort it I inadvertently formatted my old drive.

 

So, if that doesn't make you feel better, not much will.

  • Sad 2
Posted
13 minutes ago, Tudor said:

I inadvertently formatted my old drive.

You can likely recover most of your content. Formatting only touches tables not data. There are good recovery utilities even before going to the paid ones. Good luck. 

  • Like 2
Posted

No bueno.

I had started re-writing what I could find elsewhere, so not much was recovered. Nowhere near the number of files that were on that drive.

Posted
45 minutes ago, Tudor said:

No bueno.

I had started re-writing what I could find elsewhere, so not much was recovered. Nowhere near the number of files that were on that drive.

Not all the recovery utilities are the same, some use smart heuristic techniques to reclaim data. That involves scanning all the space, potentially multiple times. So if you really care about that data you will have to try a few different ones. Data recovery, forensic or not is one of the  segments of IT that pays better. One thing that is of course very mportant is to make verbatim copies of the media at the very beginning to avoid going from bad to woo4se.

Posted

image.png.02cd6aa920fe6dc0fa85b7d158231eb8.png

Wot?! No backup.... Snifff....

Been there.

Lots.

Many years ago I worked as a field engineer installing and maintaining multi user accounting systems.

One customer had a flood, or to be more accurate a large part of Glasgow got flooded, so they had no computer, no backup tapes.

The real killer though was that he bank vault in the bank at the other end of the street, where they stored their off site backup... was also flooded.

Just goes to prove, you can never have too many backups. They eventually resorted to keying in all of their customer details from old reams of paper printouts (which shows how long ago this was). But first they had to dry out the printouts by hanging them across lots of string hung up in a big hallway in their temporary premises. Their insurer paid for new computer equipment which we installed, and for the cost of hiring a bunch of people to re-key all of the data they could. The computer was expensive, but the cost of the data entry probably twice that, and they still had to rely to some extent on some of their customers to tell them what they owed. 

Posted

Had somthing similar with a well known catalogue shop with a disc failure, replaced disk got backup disc it was faulty went back and checked the rest of the discs all useless so drove to Sunderland shop and borrowed their working back up and re build it from there different shop different stock and levels took a week to manually adjust every thing, after that they ran Verification on the backup. Lesson learned, Manager not a happy bunny.

  • Like 1
  • 4 weeks later...
Posted

I took delivery of two 5tb drives yesterday. One for backups at home, and one for offsite (parents' house 30 minutes away). Wild fires happen a lot here. Last summer, we got two evacs in a single week from two separate fires, and a third within a month that didn't quite get called (bottom of the street got the evac call, but a few hundred yards away we did not). Oh yeah, and we get floods, so that's fun too. Mountain living. (Mountain) lions, tigers (sub: fires & floods), and bears! Oh... Monday.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Thank you Mike for the hints! I did go to HS Walsh and buy few tools that will help me start 🙂 I also went to the Royal Observatory at Greenwich, I saw the collection and it is amazing!! Harrison H4 is indeed an amazing manufact, and the story behind it (about the prize from the government) is incredible. Again, thank you for your suggestions, you made my day!
    • Hello watch enthusiasts, I'm encountering a peculiar issue with my Seiko 4006 movement and could use some advice. Specifically, the alarm bolt yoke doesn't function properly when I tighten the screw on the calendar plate directly above it. This results in the alarm not functioning as it should. However, when I leave the screw loose, everything works perfectly and alarm bolt yoke is functional as should be. I've tried replacing the alarm bolt yoke, the alarm bolt yoke spring, and even the calendar plate itself, but unfortunately, none of these changes have made a difference. The only workaround I've found is to keep the screw on top of the alarm bolt yoke loose. Has anyone else experienced a similar issue or have any insights on what might be causing this? I'll also be sharing pictures to help illustrate the problem. Looking forward to your suggestions and advice! TT
    • Some news. After screws removal from donor movement, a family shot. From left to right: original (broken) screws new screws purchased from Cousins UK, as "Slava 2428 clamp screws", that didn't fit. They actually & definitively look too large screws removed from donor 2428 movement Here we go! First one is in position: Let's continue on the other side: Done! Next step will be putting back the hands. Another discovery for me! I keep going ...
    • OK, I have been there many times and know several solutions. As I believe, the pinion (the part with the leaves ) is on the other side of the arbor, yes? If so, then there is easy way to solve the problem. You can grind from one side as shown on the drawing with dremel tool. This will allow to push out the broken drill bit easy from inside. Then You will be able to insert new pivot and then You can solder it in place and in the same time to fill the ground portion with solder. Of course, I mean solder for PCBs, but not the led free one - use led containing solder, the led free solder which is offered in common hardware stores is for idiots.
×
×
  • Create New...