Jump to content

Confessions of a serial flipper


toptime810

Recommended Posts

I am under a self-imposed ban on new personal acquisitions - no imcoming timepieces unless they are a repair commission or for sale.  I thought it best.  I already have five antique pocket watches, four newer mechanical ones, six wrist watches, and throughout the house are numerous clocks, three of which chime.  Somehow, God only knows, at home I have learned to tell time in my peripheral vision, because clock faces almost litter the landscape. I am acutely aware that if I am ever late for anything, it better be something like a flat tire, because nobody who knows me would believe anything else. 

  • Like 1
Link to comment
Share on other sites

  • 4 months later...
On 10/1/2020 at 6:40 AM, KarlvonKoln said:

I am under a self-imposed ban on new personal acquisitions - no imcoming timepieces unless they are a repair commission or for sale.  I thought it best.  I already have five antique pocket watches, four newer mechanical ones, six wrist watches, and throughout the house are numerous clocks, three of which chime.  Somehow, God only knows, at home I have learned to tell time in my peripheral vision, because clock faces almost litter the landscape. I am acutely aware that if I am ever late for anything, it better be something like a flat tire, because nobody who knows me would believe anything else. 

Sounds a bit like the horological equivalent of the "crazy cat lady"! LOL

Link to comment
Share on other sites

I used to flip cars (loosely speaking), and hope to eventually do the same with watches. I would buy something I thought was fun and cool, play around (I like engines, shocker, huh?), get bored once everything was fixed and tuned, then sell it off for a small profit. Just a few hundred to a few thousand. Got in a bad wreck and stopped; I got gun shy about being behind the wheel of pre-safety rolling stock... Our best friends are moving to DC for the wife's job; she got a faculty position and a huge grant (MacArthur foundation I think, but not the well known genius grant). Very sad. As a parting gift, they just had a tow truck drop off the husband's (broken down) off road/camping truck (full of tools, electronics, and electrical components). Between now and the end of the pandemic, I'll get it cleaned up and running like a top, then start flipping again. Pretty excited. 

I hope to be able to horse trade with watches. I'm currently of a mind to only have two (one for daily wear, and one for shop use). I have a handful of 404 club watches, and I hope to be able to salvage a handful of them into wearable, sellable watches that people will enjoy. Eventually, I'll move up the food chain from 404 to... Who knows... $20? Then $50? May even get crazy and go all the way to $100 if I ever get my batting average up over 500!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Here are the pics of the bridge. Looks correct, but as soon as I screw on the rotor, the watch stops. Video here: https://1drv.ms/v/s!ArG5E62RGctxjokY5ws85BzuJLVakA   Pics. Might have figured it out. I have been working on this watch for a while and since I got it as a non runner in a terrible shape, there was no guarantee that parts were proper. I think the main screw that was used on the rotor was too long, so it was stopping the main train. As soon as I fished out a much shorter and larger headed screw, things were good again. Please celebrate with me.  
    • One-dip or naphtha should be safe, but are you sure it isn't magnetized?  I would also check that.  Although, if that balance is from an Elgin 760 0r 761, I would think it would have a hairspring of non-magnetic alloy.
    • Hi, Is there a spell check function available when you are posting ? Regards CJ
    • Hi John I just did a Seiko Lord-Matic a front loader without a split stem, I used a crystal lift to remove it, although I had to have it that tight I though I was going to break the lift before the crystal would budge. So I decided that the press would be a better option as I think crystals with tension rings resist a lot of compressing. I used a crystal press to repalce it and the bezel with no issues, obviuosly a different watch to the Omega. I just took my time and kept inspecting the installation progress bit by bit Regards CJ
    • Hello All, I’m replacing the crystal in an Omega Dynamic, # 165.039, which houses a cal 552, installed through the front of the case. The replacement Sterncreuz crystal is, like the original, with tension ring. I removed the crystal using a compressed air technique to pop it out.  (I have a crystal lift, but I’m always fearful of marking the crystal edges and so avoid using it as much as possible). Now to the replacement -  any tips on putting the crystal back in?  Am I obliged to using my dreaded crystal lift to complete the task, or how about a crystal press?  I’ve put lots of crystals in using a press, but never with the movement in the watch. The thought of using one with a front-loader makes me very nervous, with the fully assembled watch sitting under the press. How would more experienced folks proceed here? Any advice, gratefully received… John Down Under…
×
×
  • Create New...