Jump to content

Confessions of a serial flipper


toptime810

Recommended Posts

I am under a self-imposed ban on new personal acquisitions - no imcoming timepieces unless they are a repair commission or for sale.  I thought it best.  I already have five antique pocket watches, four newer mechanical ones, six wrist watches, and throughout the house are numerous clocks, three of which chime.  Somehow, God only knows, at home I have learned to tell time in my peripheral vision, because clock faces almost litter the landscape. I am acutely aware that if I am ever late for anything, it better be something like a flat tire, because nobody who knows me would believe anything else. 

  • Like 1
Link to comment
Share on other sites

  • 4 months later...
On 10/1/2020 at 6:40 AM, KarlvonKoln said:

I am under a self-imposed ban on new personal acquisitions - no imcoming timepieces unless they are a repair commission or for sale.  I thought it best.  I already have five antique pocket watches, four newer mechanical ones, six wrist watches, and throughout the house are numerous clocks, three of which chime.  Somehow, God only knows, at home I have learned to tell time in my peripheral vision, because clock faces almost litter the landscape. I am acutely aware that if I am ever late for anything, it better be something like a flat tire, because nobody who knows me would believe anything else. 

Sounds a bit like the horological equivalent of the "crazy cat lady"! LOL

Link to comment
Share on other sites

I used to flip cars (loosely speaking), and hope to eventually do the same with watches. I would buy something I thought was fun and cool, play around (I like engines, shocker, huh?), get bored once everything was fixed and tuned, then sell it off for a small profit. Just a few hundred to a few thousand. Got in a bad wreck and stopped; I got gun shy about being behind the wheel of pre-safety rolling stock... Our best friends are moving to DC for the wife's job; she got a faculty position and a huge grant (MacArthur foundation I think, but not the well known genius grant). Very sad. As a parting gift, they just had a tow truck drop off the husband's (broken down) off road/camping truck (full of tools, electronics, and electrical components). Between now and the end of the pandemic, I'll get it cleaned up and running like a top, then start flipping again. Pretty excited. 

I hope to be able to horse trade with watches. I'm currently of a mind to only have two (one for daily wear, and one for shop use). I have a handful of 404 club watches, and I hope to be able to salvage a handful of them into wearable, sellable watches that people will enjoy. Eventually, I'll move up the food chain from 404 to... Who knows... $20? Then $50? May even get crazy and go all the way to $100 if I ever get my batting average up over 500!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Yes, it looks like GT Revue 30. Doctor, You can not replace escape wheel by the dimensions You listed. One needs to know much more things like number of leaves of the pinion and it's diameter, the position in high of the table and the pinion, the hight between the pivots, the exact pivots diameter... And then, even if suitable wheel is found, one will need to know how to adjust the pallets position correctly. Restoring antique movements is something different than replacing parts. In older movements parts are not interchangeable, this means spare parts do not exist. Here the case is different, but still escapement adjustment will be needed if a wheel from a donor is found. So may be it will be easier to restore the donor for You...Restoring antique movements usually means making of the parts needed and this requires knowlage and working on lathes skill. In this case repivoting of the wheel is the natural solution, but there is a long way that one must walk untill getting ready for such work.
    • I was looking at Essence of Renata, a chemical used a lot for cleaning hairsprings: "Specially prepared solution for degreasing watch and instrument components. Indispensable for degreasing hairsprings." Looking at the MSDS you can see this is just pure n-Heptane, so could be an option for those who don't want to use the chlorocarbons or hexane?     HF6013 - Horological Essence COSHH Safety Data Sheet Horological Essence_0.pdf
    • Welcome from a fellow Seiko enthusiast, there are lots of us on this forum.
    • Nickelsilver is right, movement diameter and keyless works ‘fingerprint’ are important for identifying movements. That said, this appears to be a 7 jewel version of the a Revue 30 movement.  A quick search with google turns up parts movements, and individual parts should be quite easy to come by.  Hope that helps, Mark
×
×
  • Create New...