BostonJason Posted August 12, 2020 Share Posted August 12, 2020 hi folks, total noob here... got a 6498 clone movement to start learning the watchmaking ropes... seller called it a 6498 and an m03, but I assume it's basically an st36... . anyhow, was testing the click during reassembly and the spring flew off to points unknown... so I was wondering if anyone knew where else I could get an st36 click spring in a reasonable amount of time? a Polish shop on ebay that sells the part ran out of them and an Italian shop that sells it is on vacation... original eta 6498 click springs don't look quite the same; so that route looks like a non-starter... advice appreciated... Link to comment Share on other sites More sharing options...
JohnC Posted August 12, 2020 Share Posted August 12, 2020 I had the exact same problem (except I lost a shock spring). The Polish Ebay shop was the only place I could find a replacement. However, look carefully though the listings. I found it listed for a "Seagull skeleton" or something like that - from what I can tell, just a skeletonized 6498 clone. 1 Link to comment Share on other sites More sharing options...
BostonJason Posted August 13, 2020 Author Share Posted August 13, 2020 thanks, John, I actually saw that skeletonized 6498 clone; so I'll see if it's possible to get a part from one... Link to comment Share on other sites More sharing options...
BostonJason Posted August 13, 2020 Author Share Posted August 13, 2020 the Polish ebay store had the part in another listing... $20 inc $10 shipping and handling... spanky spanky... but at least it's on the way... ;> 1 Link to comment Share on other sites More sharing options...
jdm Posted August 13, 2020 Share Posted August 13, 2020 (edited) Round wire springs are the easier to fit or adapt, cheap when bought as an assortment https://www.cousinsuk.com/product/circular-springs-wristwatch Edited August 13, 2020 by jdm 1 Link to comment Share on other sites More sharing options...
BostonJason Posted August 13, 2020 Author Share Posted August 13, 2020 wow, thanks jdm, I'll get some of those too and try my hand at adapting my own! Link to comment Share on other sites More sharing options...
Recommended Posts