Jump to content

Recommended Posts

Posted

A 'Delvina Genev' 17 Jewel ladies watch joins the club. This has a 6.75''' ETA 2410 with a fixed stud carrier (so probably ca. 1955)

RIMG0117.thumb.JPG.fba17b0b44a2fd4556452c58837540c2.JPG

RIMG0118.thumb.JPG.9697cf6cb4b3bd5d629631787c1af992.JPG

I added the Sekonda for a sense of scale.

RIMG0124.thumb.JPG.94170936882dbd7d8e0c7e108f354efa.JPG

It is now clean, and running reasonably well. Oh, and did I mention, this is a really tiny watch.

image.png.0028c68143661833768199b6dc5d6924.png

So much so that I had to file down one of my smallest screwdrivers to access the smallest screws on this watch.

"Why would you torture yourself with any thing that small if nobody is likely to ever wear it?" I hear you ask.. well apart from the obvious mild insanity, the story is that it fell out of some bubble wrap that I was using to pad the box with the cuckoo clock that I took back this evening.

Obviously it was part of an ebay job lot and I must have entirely failed to spot it when I unpacked the watch, or watches that I actually bid on the lot for, and it got packed away in the bubble wrap pile.

In other words I felt sympathetic for the poor, ignored,  neglected thing.

I will admit my sympathy was wearing a little thin while re-assembling it, and repeatedly dropping a couple of those tiny screws.

Before you ask, the missing movement retaining screw was missing before I started, and the marred screw head on the other one wasn't me either. 

The poor thing also had a blob of what appeared to be epoxy resin on the case back which took a little bit of gentle persuasion to leave the scene.  Once that was removed,  the case back scrubbed up nicely. 


Now all I need to do is find a suitable strap for it.

  • Like 4
Posted (edited)

Joining the club today we have a late '60s or more likely early to mid '70s Kander "Marines".

It is sporting a nos Apollo tan leather strap for that authentic 1970s vibe.

RIMG0126.thumb.JPG.993648f221cfb681d0e9ec76dfda5ec3.JPG

BFG 158  Brevets, Swiss Made, 25 Jewels; Novodiac (Baumgartner 1582(CLD))

RIMG0129.thumb.JPG.dfc5b98a99c3af20689ff9656b1441b5.JPG

The plating is a little worn and there are a couple of tiny scratches still visible on the crystal if you look very carefully but the dial is perfect and the watch is running well following a clean and service.

Edited by AndyHull
  • Like 2
Posted
On 7/6/2021 at 12:35 AM, AndyHull said:

A 'Delvina Genev' 17 Jewel ladies watch joins the club. This has a 6.75''' ETA 2410 with a fixed stud carrier (so probably ca. 1955)

RIMG0117.thumb.JPG.fba17b0b44a2fd4556452c58837540c2.JPG

RIMG0118.thumb.JPG.9697cf6cb4b3bd5d629631787c1af992.JPG

I added the Sekonda for a sense of scale.

RIMG0124.thumb.JPG.94170936882dbd7d8e0c7e108f354efa.JPG

It is now clean, and running reasonably well. Oh, and did I mention, this is a really tiny watch.

image.png.0028c68143661833768199b6dc5d6924.png

So much so that I had to file down one of my smallest screwdrivers to access the smallest screws on this watch.

"Why would you torture yourself with any thing that small if nobody is likely to ever wear it?" I hear you ask.. well apart from the obvious mild insanity, the story is that it fell out of some bubble wrap that I was using to pad the box with the cuckoo clock that I took back this evening.

Obviously it was part of an ebay job lot and I must have entirely failed to spot it when I unpacked the watch, or watches that I actually bid on the lot for, and it got packed away in the bubble wrap pile.

In other words I felt sympathetic for the poor, ignored,  neglected thing.

I will admit my sympathy was wearing a little thin while re-assembling it, and repeatedly dropping a couple of those tiny screws.

Before you ask, the missing movement retaining screw was missing before I started, and the marred screw head on the other one wasn't me either. 

The poor thing also had a blob of what appeared to be epoxy resin on the case back which took a little bit of gentle persuasion to leave the scene.  Once that was removed,  the case back scrubbed up nicely. 


Now all I need to do is find a suitable strap for it.

Sorry to go off topic but could I ask what timegrapher set up you have please? 

Posted
On 6/29/2021 at 2:12 PM, LittleWatchShop said:

I never figured out how to remove the lower parashock jewel, so I left it alone.

I'm probably a little late to the party, but that Caravelle/Bulova  movement is almost identical to the Citizen 0270 (it is a licensed copy) and the HMT 0231 (also a licensed copy) so this video may help.
 

roo

Posted
57 minutes ago, AndyHull said:

I'm probably a little late to the party, but that Caravelle/Bulova  movement is almost identical to the Citizen 0270 (it is a licensed copy) and the HMT 0231 (also a licensed copy) so this video may help

I did figure it out.  Good video though!

Posted

It was the Avia Matic's turn for a little bit of TLC today.

RIMG0177.thumb.JPG.e518162e784597518c125dbf6dc6b899.JPG

I've cleaned everything except the dial and hands. The reason is that I suspect if I so much as sneeze next to the dial I'll make the patina look much less interesting. RIMG0172.thumb.JPG.56a9884bfcf2f36c7f124445f5cad62f.JPG

I was almost convinced initially that it is actually meant to look like that, but the more I look at it the less likely that seems. It is however strangely attractive just the way it is. Those words will almost certainly get you in to trouble if used unwisely.

I've decided to simply leave the dial well alone for the time being.

RIMG0169.thumb.JPG.955f2c75d8e084258737b3118e1e8763.JPG

446774907_Screenshotat2021-07-1122-36-31.thumb.png.5f424377e8ee75aea4f0bda3fb91d535.png

The FHF 905 inside however seems to have enjoyed the attention as you can see from the trace. I would also suggest that it makes better use of its 17 jewels than the 25 used in the BFG 158 in the Kander above. 

  • Like 1
Posted (edited)

Woo! It's been MONTHS since I snagged a 404 despite trolling eBay at least weekly that whole time. I finally got one last night, and I got it all the way!

1302568813_cernosdial.thumb.jpeg.b93144b685f5c1735f022d06bc9d2fa3.jpeg

2020451360_cernosmovement.thumb.jpeg.609d5c9a1ada53ec1667c661a28d4cb0.jpeg

$1 plus my personal $15 max shipping limit reserved for when I think a watch is super cool. A fully jeweled jump hour totally fits the bill! It's a plated brass case, which I'm not a huge fan of, and that crystal will be a challenge, but jump hour!

The description just says, "Doesn't work, traces of existence. The balance is alive. 35 * 40 mm." in Russian according to google translate. I haven't dug into the movement yet, but it looks French. Stoked!

Hopefully it actually makes it here. The last time I bought a watch on eBay from overseas (Germany, and two of them), shipping was astronomical and beyond what the seller had accounted for. The deal died, and the watches never made it here. The Russian seller has 0 feedback, so a hitch like that would probably disappear the watch real quick.

Edited by spectre6000
  • Like 4
Posted (edited)

I've been super strict with myself re: buy price vs. shipping. I've been keeping it under £4.04 regardless of whether shipping was included or not. I don't typically go after lots either. I should probably reconsider both, and just keep it under $15-$20 per watch all-in... I'm the only person playing my personal 404 game after all. Worst case scenario, I still get a jaw droppingly cheap watch.

Also, I should go to garage sales...

Edited by spectre6000
  • 2 weeks later...
Posted (edited)

AsPurchased.thumb.jpg.76392e8205c1cbaa2a9acaedf5368a84.jpg

The latest entrant to the club. The price was well inside the 404 club rules, even if you  include shipping which was only a pound.

AsPurchased.jpg.4cfd558f94df87c4650a26a5b3523b16.jpg

If you look carefully you will see it says 375 on the rim.... You really have to pay attention to those listings. 375 means the case is 9ct gold.

EDIT: The poor battered thing arrived and with the case weighing in at just under 3g and with 9ct scrap prices  at around £11.85 per gram, its not too shabby a purchase for around three quid at all.

Sadly the mechanism is probably beyond fixing, and it is missing the front of the case, but even for scrap it was worth the money.

Edited by AndyHull
Posted

Here's a meta 404 for you... I wanted to post a screen shot of a 404 error message for the on-the-money win. I typed in random crap for a URL and got a domain registrar park page. I typed in even more randomer crap, and google actually just searched for it. The "404 Not Found" for the 404 could not be found...

  • Like 1
  • Haha 1
Posted

Thursday yard sales I found nothing but Friday I found these with 3 watch bracelets for $25.  All working except the newer Mickey.  Older Mickey looks to be from the late 30's.

IMG_4912.JPG

  • Like 3
Posted

Today's haul. $1 $25 $20.  Not posting to brag but because of the lack of 404 watches on eBay.  10,000 people looking for deals on eBay.  How many are looking for watches in your neighborhood? I've found 2 Omegas 5 Longines Tones of gold retirement watches.  Trick is you have to ask if they have any old watches inside working or not.  They always forget about there watches.  You do have to go to lots of yard sales to get a watch but the hunt is the fun and I get outside and off the computer.  Good luck hunting.

IMG_4914.JPG

IMG_4913.JPG

IMG_4915.JPG

Posted
7 hours ago, markr said:

How many are looking for watches in your neighborhood?

Don't think I've ever seen a garage sale in my part of the UK, only thing close is when people leave stuff at the end of their drive with a sign up saying to help yourself. Shame! 

  • Sad 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Get well soon Old Hippy, torn muscles.,  not good
    • Id love to see how he has the output shaft mounted to this setup, as I have the same rotary stage and stepper in my build.
    • If you see at least one thread protruding, or even a half, then you may have a chance using this "tool", but don't squeeze hard. Lot's of patience, and if you notice any signs of loctite or other adhesives, then apply several drops of acetone on top of broken stem. Use heat (hair dryer) also. You should be able gradually turn it counterclockwise, just like i did on this broken Timex stem, which was glued with something like nail hardener. Then you can use an extender to save your broken stem. https://m.media-amazon.com/images/I/513DVvkfW5L.__AC_SX300_SY300_QL70_ML2_.jpg   You can also try cutting a small grove / slot on top of the broken stem to use 0.7mm flat screwdriver.   Depending on the Crown material and Stem material, you can try dissolving the stem. 
    • How long had it been without any wind before you first put it on the timegrapher?  Perhaps there was some debris / old lubricant that loosened up while you were waiting to do the 24 hour reading? I recently serviced a Seiko 6319 that immediately after service was absolutely horrible on the timegrapher - 24 hours later (without me doing anything) it was rock solid!  I was a little surprised by this (as I have seen improvements in amplitude after letting it run in but never a watch going from useless to great!). I was suspicious that some dirt must still be in there so I took it apart and cleaned and lubcricated it again and had exactly the same experience - snow storm that after some hours turned into a nice straigh line with good amplitude 🤷‍♂️
    • Yes, I know it was able to run before just enough that everything supposed to be affixed with shellac could fall out. I won't get back to work on this watch for several days at least, but one thing you mentioned about the banking pin adjustments being intended for fork horn clearance got me wondering.... The last adjustment I made to the entry stone yesterday did not solve the problem when the balance is installed. The escape teeth can't quite clear the stone when the balance swings. But I thought it was going to work because manually snapping the fork back and forth did allow the escape wheel to advance almost all the time. I wonder if there's another issue with the impulse jewel, that I have to shellac again anyway. I am going to measure the fork slot and the jewel because I am curious if it is the right size or possibly narrower than it should be. My thinking is if the horn clearance is too great maybe it is not getting enough impulse to clear the escape tooth. But pushing the fork with a tool can move it far enough to clear the escape wheel tooth.  I'll see later in the week. I didn't expect a big challenge from this watch because it ticked for 5 minutes before stopping without shellac. As always I was way wrong.
×
×
  • Create New...