Jump to content

Introduction

nmarkl

By nmarkl
in Introduce Yourself Here

 Share

Recommended Posts

nmarkl New Member

nmarkl

Posted
Posted

Sorry for posting without introducing myself but it was a little confusing where I should start till I figured it out that you use the same page as when you post a chat. So here goes. 
Im originally from Austria, spent a couple of decades in South Africa, Canada and now in California. I’m retired and  have three daughters, so I’m the family handy man. I’m a mechanical engineer by profession and still from the old school did all my studies with a slide rule. I’m interested in wanting to know and understand how things work, so a pretty big field. I now have more patience now that I’m retired to work on clocks and watches. I recently resurrected a anniversary clock that my wife inherited from her grand mother, that apparently never worked. My skills at the moment are limited to taking a watch or clock apart cleaning and oiling it and assembling it again. I hope this is enough of an intro to give you an idea who I am. Oh by the way I’m still a Canadian citizen. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Balance cock stud screw

      By Neverenoughwatches · Posted

      As Richard said, this is a really old school trick for joinery.  Cut i strip of paper, might need to be watch paper  around 1 " x 1/2" lay it over a staking block then press the stud screw into and through the edge of the paper upto the head of the screw. You probably wont even need to pull the paper away the head will pull itself through.
    • Neverenoughwatches
      Leaving the forum for a while.

      By Neverenoughwatches · Posted

      Thanks Jon, my mum is getting there day by day, so strong and determined, they dont make em like this anymore 🙂 Old folk are so amazing,  my mum used to love her golf, she didn't stop playing until she was 70 . Enjoy your trip and your golf.
    • ooteenie
      Waltham 6/0 d winding stem

      By ooteenie · Posted

      Hello,  i am looking to source a winding stem (winding arbor) for a waltham 6/0 d movement. I have found some that claim to fit 6/0, 6/0s, 6/0b etc and somealso claim they will also fit the d as well. The d does have hacking which is driven by the stem seating completely. Given some of the costs of these, i was hoping someone would know of any interchangeability with a source, or know a source where a confirmed 6/0 d stem can be had. I am in the US so a US dealer is best.    thanks in advance. 
    • rehajm
      Leaving the forum for a while.

      By rehajm · Posted

      So great to see and hear- your mum looks great! …my mil had a stroke last summer in the golf course parking lot. I’m flying out tomorrow to visit and play golf. she’s ornery because she can’t get off the tee but I hear she makes up for it on the greens since she’s been putting since a week after her stroke 🧐…
    • JonC
      Leaving the forum for a while.

      By JonC · Posted

      Very best wishes to you and your family, as a carer myself I know how difficult things can be.
×
×
  • Create New...